Machine tools - Test code for machine tools - Part 1: Geometric accuracy of machines operating under no-load or finishing conditions (ISO 230-1:1996)— 53 стр.
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010 + Cor 1:2013)
Cosmetics - Microbiology - Guidelines for the risk assessment and identification of microbiologically low-risk products (ISO 29621:2017); German version EN ISO 29621:2017— 21 стр.
Thermal insulating products for building applications - Determination of short-term water absorption by partial Immersion (ISO/DIS 29767:2017); German and English version prEN ISO 29767:2017
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017); German version EN ISO 1101:2017
Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF (ISO 7388-3:2013)— 13 стр.
Tool shanks with 7/24 taper for automatic tool changers - Part 2: Dimensions and designation of shanks of forms J, JD and JF (ISO 7388-2:2007)— 10 стр.
Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy (ISO 1985:1998)— 17 стр.
Machine tools - Test conditions for milling machines with table of variable height; Testing of accuracy - Part 2: Machines with horizontal spindle (ISO 1701-2:1997)— 24 стр.
Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 2: Power-operated chucks with tongue and groove type jaws (ISO 3442-2:2005)— 14 стр.
Machine tools - Test conditions for boring and milling machines with horizontal spindle; Testing of the accuracy - Part 3: Floor-type machines with detached, stationary work-holding table (ISO 3070-3:1997)— 43 стр.
Machine tools - Test conditions for machining centres - Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis) ( ISO 10791-1:1999)— 58 стр.
Machine tools - Test conditions of machining centres - Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis) (ISO 10791-3:1998)— 50 стр.
Machine tools - Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes (ISO 10791-4:1998)— 8 стр.
Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 3: Power-operated chucks with serrated jaws (ISO 3442-3:2007)— 20 стр.
Machine tools - Test conditions for die sinking electro-discharge machines (EDM); Terminology and testing of accuracy - Part 1: Single column machines (cross slide table type and fixed table type) (ISO 11090-1:1998)— 29 стр.
Machine tools - Test conditions for boring and milling machines with horizontal spindle; Test of the accuracy - Part 4: Planer type machines with movable column (ISO 3070-4:1998)— 47 стр.
Machine tools - Test conditions for die sinking electro-discharge machines (EDM); Terminology and testing of accuracy - Part 2: Two column machines (slide head type and cross slide table type) (ISO 11090-2:1998)— 30 стр.
Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 1: Manually operated chucks with tongue and groove type jaws (ISO 3442-1:2005)— 15 стр.
Machine tools - Test conditions for boring and milling machines with horizontal spindle; Testing of the accuracy - Part 2: Table-type machines (ISO 3070-2:1997)— 44 стр.
Machine tools - Test conditions for milling machines with table of variable height; Testing of accuracy - Part 3: Machines with vertical spindle (ISO 1701-3:1997)— 19 стр.
Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table; German version EN 1218-1:1999+A1:2009— 44 стр.
