DIN 69882-6:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 6: Type E, clamping chuck for collets with 8° setting angle - Dimensions — 7 стр.

Описание Изменения Ссылки Версии

Ссылочные документы

DIN 4000-1:1992-09

Отменен

Object parameter list; concepts and principles — 16 стр.

DIN 4000-1 Beiblatt 1:1975-02

Отменен

Tabular Lay-outs of Article Characteristics; Principles; Application in Article Characteristics Lists — 3 стр.

DIN 4000-1 Beiblatt 2:2002-09

Отменен

Tabular layout of article characteristics - Part 1: Concepts and principles; Overview of standardized tabular layouts of article characteristics — 25 стр.

DIN 4000-89:1998-04

Отменен

Tabular layout of article characteristics - Part 89: Rotating tool adaptors — 5 стр.

DIN 4000-95:1998-04

Отменен

Tabular layout of article characteristics - Part 95: Tool interface coding — 6 стр.

DIN 4000-95 Beiblatt 1:1998-04

Отменен

Tabular layout of article characteristics - Part 95: Tool interface coding; Appendix, companies code for specific interface — 4 стр.

DIN 6499:2002-04

Отменен

Collets with 8° setting angle for tool shanks - Collets, nuts and fitting dimensions — 8 стр.

DIN 69882-1:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 1: Designation system, technical delivery conditions — 5 стр.

DIN 69882-2:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 2: Type A, milling cutters with tenon and parallel key drive - Dimensions — 7 стр.

DIN 69882-3:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 3: Type B, milling machine arbors with enlarged contact surface diameter for milling cutters with parallel key drive - Dimensions — 6 стр.

DIN 69882-4:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 4: Type C, holding fixture for parallel shanks with lateral driving surface - Dimensions — 7 стр.

DIN 69882-5:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 5: Type D, holders for parallel shanks with inclined clamping surface - Dimensions — 8 стр.

DIN 69882-7:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 7: Type F, expansion clamping chuck - Dimensions — 12 стр.

DIN 69882-8:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 8: Type G, shrink chuck - Dimensions — 10 стр.

DIN 69893-1:2003-05

Отменен

Hollow taper shanks with flange contact surface - Part 1: Hollow taper shanks type A and type C; Dimensions and design — 14 стр.

DIN ISO 2768-1:1991-06

Действует

General tolerances; tolerances for linear and angular dimensions without individual tolerance indications; identical with ISO 2768-1:1989 — 5 стр.

DIN 69882-6:2000-07

Отменен

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 6: Type E; clamping chuck for collets with 8° setting angle; dimensions — 4 стр.

На этот документ ссылаются

DIN 69882-1:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 1: Designation system, technical delivery conditions — 5 стр.

DIN 69882-1:1997-10

Отменен

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 1: Designation system; technical delivery conditions — 2 стр.

DIN 69882-8:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 8: Type G, shrink chuck - Dimensions — 10 стр.

DIN 69882-2:1997-10

Отменен

Tool holder with hollow taper shanks according to DIN 69893-1 - Part 2: Type A, milling cutters with tenon and parallel key drive; dimensions — 4 стр.

DIN 69882-5:1999-01

Отменен

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 5: Type D; Holders for parallel shanks with inclined clamping surface; Dimensions — 6 стр.

DIN 69882-7:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 7: Type F, expansion clamping chuck - Dimensions — 12 стр.

DIN 69882-3:2005-06

Действует

DIN 69882-6:2000-07

Отменен

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 6: Type E; clamping chuck for collets with 8° setting angle; dimensions — 4 стр.

DIN 69090-1:2011-12

Действует

MQL processing technology - Part 1: Terms and definitions — 9 стр.

DIN 69882-2:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 2: Type A, milling cutters with tenon and parallel key drive - Dimensions — 7 стр.

DIN 69882-3:1997-10

Отменен

DIN 69882-4:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 4: Type C, holding fixture for parallel shanks with lateral driving surface - Dimensions — 7 стр.

DIN 69090-4:2014-03

Действует

MQL processing technology - Part 4: Tapping chuck and tab/cold forming tab — 32 стр.

DIN 69882-4:1997-10

Отменен

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 4: Type C, holding fixture for paralled shanks with lateral driving surface; dimensions — 4 стр.

DIN 69090-3:2011-12

Действует

MQL processing technology - Part 3: Tools and tools systems — 33 стр.

DIN 69882-5:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 5: Type D, holders for parallel shanks with inclined clamping surface - Dimensions — 8 стр.

DIN 4000-89:2012-03

Действует

Tabular layouts of properties - Part 89: Adaptive items for tools and extenders — 71 стр.

DIN 4000-95:1998-04

Отменен

Tabular layout of article characteristics - Part 95: Tool interface coding — 6 стр.

DIN 4000-136:2011-09

Действует

Tabular layouts of properties - Part 136: Holder and chuck tools for rotating and stationary grinding and dressing tools — 26 стр.