Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids; German version EN 682:2002 + A1:2005— 20 стр.
Sealants for gas supply; sealing materials of rubber, cork and synthetic fibres for gas armatures and gas appliances; safety requirements, tests— 6 стр.
Testing of rubber; determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test— 7 стр.
Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures (ISO 815:1991 + ISO 815:1991/Cor.1:1993)— 11 стр.
Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999 including Technical Corrigendum 1:2001)— 191 стр.
Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures (ISO 3384:1999, including Amendment 1:2001)— 15 стр.
Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change (ISO 3759:2007)— 12 стр.
Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection (ISO 18857-1:2005); German version EN ISO 18857-1:2006— 30 стр.
Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999 including Technical Corrigendum 1:2001), Corrigenda to DIN ISO 2859-1:2004-01— 4 стр.
Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures (ISO 3384:2005)— 16 стр.
Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL (ISO 3951-1:2005); Text in German and English— 223 стр.
Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids; German version EN 682:2002— 22 стр.
Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel; German version EN 15069:2008— 72 стр.
Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel; German version EN 15069:2008— 72 стр.
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa— 47 стр.
Separator systems for light liquids (e. g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control; German version EN 858-1:2002 + A1:2004— 61 стр.
Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar; German version EN 88-2:2007— 44 стр.
Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids; German version EN 682:2002— 22 стр.
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements; German version EN 13774:2013— 33 стр.
Valves for gas distribution systems with maximum operating pressure <kleiner => 16 bar - Performance requirements; German version EN 13774:2003— 30 стр.
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 1: Replacement on the line by pipe bursting and pipe extraction (ISO 21225-1:2018); German version EN ISO 21225-1:2018— 28 стр.
Plastics piping systems for the trenchless replacement of underground pipeline networks - Part 2: Replacement off the line by horizontal directional drilling and impact moling (ISO 21225-2:2018); German version EN ISO 21225-2:2018— 29 стр.
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3: Fittings (ISO 16486-3:2012 + AMD 1:2014)— 24 стр.
Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018); German version EN ISO 11299-1:2018— 27 стр.
