Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 267-30:2008-04

Отменен
Fasteners - Technical specifications - Part 30: Metric thread rolling screws of property class 10.9 — 8 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 4000-160:2007-02
Действует
Tabular layout of product properties - Part 160: Fasteners with external thread — 32 стр.
DIN 7500-2:1984-12
Отменен
Thread rolling screws for ISO metric thread; guideline values for hole diameters — 2 стр.
DIN EN 20898-7:1995-04
Действует
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995 — 5 стр.
DIN EN ISO 898-1:2007-02
Отменен
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO/DIS 898-1:2006); German version prEN ISO 898-1:2006
DIN EN ISO 4017:2001-03
Отменен
Hexagon head screws - Product grades A and B (ISO 4017:1999); German version EN ISO 4017:2000 — 15 стр.
DIN EN ISO 4042:2001-01
Отменен
Fasteners - Electroplated coatings (ISO 4042:1999); German version EN ISO 4042:1999 — 26 стр.
DIN EN ISO 10683:2001-02
Отменен
Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2000); German version EN ISO 10683:2000 — 14 стр.
DIN EN ISO 15330:2000-01
Действует
Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999); German version EN ISO 15330:1999 — 11 стр.
DIN ISO 261:1999-11
Действует
ISO general purpose metric screw threads - General plan (ISO 261:1998) — 6 стр.
ISO 5954:2014
Действует
Cold-reduced carbon steel sheet according to hardness requirements — 14 стр.
DIN 267-30:2016-12
Действует
Fasteners - Technical specifications - Part 30: Metric thread rolling screws of property class 10.9 — 9 стр.
DIN 267-30:2001-02
Отменен
Fasteners - Technical delivery conditions - Part 30: Metric thread rolling screws of property class 10.9 — 4 стр.

На этот документ ссылаются

DIN 553:1972-02
Отменен
Slotted Set Screws with Cone End — 2 стр.
DIN 610:1971-01
Отменен
Hexagon Fitting Bolts with Short Threaded Portion — 4 стр.
DIN 924:1972-08
Отменен
Slotted Countersunk (Oval) Head Screws with Full Dog Point — 2 стр.
DIN 1480:1975-09
Отменен
Turnbuckles, Forged (Open Type) — 5 стр.
DIN 464:1970-12
Отменен
Knurled Thumb Screws — 2 стр.
DIN 173-1:1979-06
Отменен
Renewable Jig Bushes; Slip Renewable Jig Bushes Types K and KL, Fixed Renewable Jig Bushes Type K; Accessories — 6 стр.
DIN 922:1972-08
Отменен
Slotted Pan Head Screws, with Small Head and Full Dog Point — 2 стр.
DIN 439:1972-12
Отменен
Hexagon Nuts; Thin Type — 3 стр.
DIN 571:1975-03
Отменен
Hexagon Head Wood Screws — 2 стр.
DIN 653:1971-01
Отменен
Flat Knurled Thumb Screws — 2 стр.
DIN 225:1979-01
Отменен
Die Stocks — 4 стр.
DIN 1478:1975-09
Отменен
Turnbuckles Made from Steel Tube or Round Steel Bar — 2 стр.
DIN 1479:1975-09
Отменен
Turnbuckle Nuts Made from Hexagon Bar — 2 стр.
DIN 562:1972-12
Отменен
Square Nuts, Thin Type — 2 стр.
DIN 906:1973-01
Отменен
Hexagon Socket Pipe Plugs with Taper Thread — 2 стр.
DIN 835:1972-12
Отменен
Studs, Threaded End <ca> 2 d — 2 стр.
DIN 91:1972-05
Отменен
Slotted Raised Countersunk Head Screws; Small Head (Raised Countersunk Heads of Type hitherto Used) — 3 стр.
DIN 561:1967-12
Отменен
Hexagon Set Screws with Full Dog Point, with Small Hexagon and Threaded to Head; Metric Screw Thread, Metric Fine Screw Thread — 1 стр.
DIN 529:1972-12
Отменен
Stone Bolts — 3 стр.
DIN 186:1970-11
Отменен
T-Head Bolts with Square Neck — 2 стр.
DIN 315:1972-12
Отменен
Wing Nuts — 1 стр.
DIN 87:1972-05
Отменен
Slotted Countersunk Head Screws; Large Head (Countersunk Heads of Type hitherto Used) — 3 стр.
DIN 1835-2:1978-08
Отменен
Parallel Shanks for Milling Cutters; Connecting Dimensions for Clamping Chucks; Accessories — 4 стр.
DIN 316:1970-11
Отменен
Wing Screws — 2 стр.
DIN 976:1970-01
Отменен
Threaded Pins — 2 стр.
DIN 97:1975-03
Отменен
Slotted Countersunk Head Wood Screws — 2 стр.
DIN 558:1967-12
Отменен
Hexagon Screws; Thread Approximately to Head, Metric Thread, Type g — 1 стр.
DIN 910-2:1973-01
Отменен
Hexagon Head Screw Plugs with Shoulder, Heavy Type with Vent Hole, Parallel Screw Thread — 1 стр.
DIN 404:1972-02
Отменен
Slotted Capstan Screws — 3 стр.
DIN 910-1:1973-01
Отменен
Hexagon Head Screw Plugs with Shoulder, Heavy Type Parallel Screw Thread — 2 стр.
DIN 480:1968-03
Отменен
Square Head Bolts with Collar and Half Dog Point with Rounded End; Metric Thread — 1 стр.
DIN 907:1973-01
Отменен
Core Plugs, Core Plug Bars — 2 стр.
DIN 963:1970-06
Отменен
Slotted Countersunk (Flat) Head Screws (Countersunk Heads according to ISO) — 3 стр.
DIN 438:1972-02
Отменен
Slotted Set Screws with Cup Point — 2 стр.
DIN 546:1970-11
Отменен
Slotted Round Nuts — 1 стр.
DIN 908:1973-01
Отменен
Hexagon Socket Screw Plugs with Shoulder and Parallel Thread — 2 стр.
DIN 88:1972-05
Отменен
Slotted Raised Countersunk Head Screws; Large Head (Raised Countersunk Heads of Type hitherto Used) — 3 стр.
DIN 417:1972-02
Отменен
Slotted Set Screws with Full Dog Point — 2 стр.
DIN 926:1972-08
Отменен
Slotted Headless Screws with Full Dog Point — 2 стр.
DIN 555:1972-12
Отменен
Hexagon Nuts; Metric Thread, Type g — 1 стр.
DIN 920:1972-08
Отменен
Slotted Pan Head Screws with Small Head — 2 стр.
DIN 479:1968-07
Отменен
Square Head Bolts with Half Dog Point; Metric Screw Thread, Metric Fine Screw Thread — 1 стр.
DIN 137:1970-12
Отменен
Spring Washers; Curved or Crinkled — 2 стр.
DIN 267-13:1980-03
Отменен
Mechanical Fasteners; Technical Conditions of Delivery; Components for Bolted Connections Made Mainly from Materials Exhibiting a High Impact Strength at Low Temperature or from Materials with a High Temperature Strength — 18 стр.
DIN 909:1973-01
Отменен
Hexagon Head Pipe Plugs with Taper Thread — 2 стр.
DIN 939:1972-12
Отменен
Studs, Threaded End <ca> 1.25 d — 3 стр.
DIN 601:1970-11
Отменен
Hexagon Bolts without Hexagon Nut - with Hexagon Nut, Type g — 2 стр.
DIN 261:1970-12
Отменен
T-Head Bolts — 2 стр.
DIN 1079:1970-09
Отменен
Steel Road Bridges; Construction Principles — 5 стр.
DIN 127:1970-12
Отменен
Spring Lock Washers; Barbed or Plain, with Rectangular Cross-section — 2 стр.
DIN 63:1972-05
Отменен
Slotted Countersunk Head Screws; Small Head (Countersunk Heads of Type hitherto Used) — 3 стр.
DIN 478:1968-03
Отменен
Square Head Bolts with Collar; Metric Thread — 1 стр.
DIN 797:1970-11
Отменен
Special Foundation Bolts — 1 стр.
DIN 929:1972-12
Отменен
Hexagon Weld Nuts — 2 стр.
DIN 267-2:1968-04
Отменен
Bolts, Screws, Nuts and Similar Threaded and Formed Parts; Technical Conditions of Delivery; Types and Dimensional Accuracy — 16 стр.
DIN 564:1967-12
Отменен
Hexagon Set Screws with Half Dog Point and Flat Cone End with Small Hexagon and Threaded to Head; Metric Screw Thread, Metric Fine Screw Thread — 1 стр.
DIN 173-2:1968-01
Отменен
Renewable Drill Bushes; Fixed Renewable Drill Bushes, Slip Renewable Drill Bushes Types ES and ER, Liners, Locking Screws — 4 стр.
DIN 962:2013-04
Действует
Bolts, screws, studs and nuts - Designations, types and finishes — 15 стр.
DIN 807:1966-11
Действует
Lathe centres 60° with extractor nut — 2 стр.
DIN 965:1971-12
Отменен
Cross Recessed Countersunk (Flat) Head Screws (Countersunk Heads according to ISO) — 2 стр.
DIN 609:1971-01
Отменен
Hexagon Fitting Bolts with Long Threaded Portion — 4 стр.
DIN 85:1972-12
Отменен
Slotted Pan Head Screws — 2 стр.
DIN 975:1970-01
Отменен
Threaded Rods — 1 стр.
DIN 921:1972-08
Отменен
Slotted Pan Head Screws with Large Head — 2 стр.
DIN 787:1977-08
Отменен
Bolts for T-slots — 4 стр.
DIN 98:1962-10
Отменен
Rotatable Ball Handles — 2 стр.
DIN 923:1972-08
Отменен
Slotted Pan Head Screws with Shoulder — 2 стр.
DIN 960:1970-11
Отменен
Hexagon Bolts; Metric Fine Thread, Types m and mg — 3 стр.
DIN 927:1972-08
Отменен
Slotted Shoulder Screws — 2 стр.
DIN 95:1975-03
Отменен
Slotted Raised Countersunk (Oval) Head Wood Screws — 2 стр.
DIN 84:1970-10
Отменен
Slotted Cheese Head Srews — 2 стр.
DIN 267-3:1983-08
Отменен
Fasteners; technical delivery conditions; property classes for carbon steel and alloy steel bolts and screws; conversion of property classes — 2 стр.
DIN 267-5:1968-04
Отменен
Bolts, Screws, Nuts and Similar Threaded and Formed Parts; Technical Conditions of Delivery; Testing and Acceptance — 5 стр.
DIN 547:1970-11
Отменен
Round Nuts with Drilled Holes in One Face — 1 стр.
DIN 467:1970-11
Отменен
Knurled Nuts — 1 стр.
DIN 96:1975-03
Отменен
Slotted Round Head Wood Screws — 2 стр.
DIN 548:1970-11
Отменен
Round Nuts with Set Pin Hole Inside — 1 стр.
DIN 557:1972-12
Отменен
Square Nuts; Type g — 1 стр.
DIN 938:1972-12
Отменен
Studs, Metal End <ca> 1 d — 3 стр.
DIN 427:1972-02
Отменен
Slotted Headless Screws with Chamfered End — 3 стр.
DIN 798:1972-12
Отменен
Special Foundation Nuts for Special Foundation Bolts according to DIN 797 — 1 стр.
DIN 962:1975-09
Отменен
Screws, Bolts, Studs and Nuts; Additional Types and Finishes; Details of Order and Dimensions — 6 стр.
DIN 928:1970-05
Отменен
Square Weld Nuts — 2 стр.
DIN 551:1972-02
Отменен
Slotted Set Screws with Chamfered Ends — 2 стр.
DIN 466:1970-11
Отменен
Knurled Nuts with Collar — 1 стр.
DIN 830:1962-08
Отменен
Machine Handles; Long Pattern — 1 стр.
DIN 465:1970-12
Отменен
Slotted Knurled Thumb Screws — 2 стр.
DIN 933:1970-12
Отменен
Hexagon Screws; Thread Approximately to Head, Metric Thread, Types m and mg — 3 стр.
DIN 188:1971-01
Отменен
T-Head Bolts with Double Nib — 2 стр.
DIN 39:1962-10
Отменен
Fixed Ball Handles — 2 стр.
DIN 925:1972-08
Отменен
Slotted Countersunk (Flat) Head Screws with Full Dog Point — 2 стр.
DIN 964:1970-06
Отменен
Slotted Raised Countersunk (Oval) Head Screws (Countersunk Heads according to ISO) — 2 стр.
DIN 267-30:2001-02
Отменен
Fasteners - Technical delivery conditions - Part 30: Metric thread rolling screws of property class 10.9 — 4 стр.
DIN 980:1972-12
Отменен
Prevailing Torque-type Locknuts; Gripping — 2 стр.
DIN 525:1970-11
Отменен
Studs for Welding — 1 стр.
DIN 966:1971-12
Отменен
Cross Recessed Countersunk (Oval) Head Screws (Countersunk Heads according to ISO) — 2 стр.
DIN 225:1987-12
Отменен
Die stocks — 4 стр.
DIN 792:1976-03
Действует
Cylindrical counter sunk screws — 1 стр.
DIN 1835-2:1986-12
Отменен
Parallel shanks for milling cutters; connecting dimensions for holder chucks, accessories — 6 стр.
DIN 1073:1974-07
Отменен
Steel road bridges; design bases — 16 стр.