DIN EN 61587-1:2000-01

Отменен

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis (IEC 61587-1:1999); German version EN 61587-1:1999 — 20 стр.

Описание Изменения Ссылки Версии

Ссылочные документы

DIN 41494-1:1974-09

Отменен

Panel mounting racks for electronics equipments; racks and panels, dimensions — 4 стр.

DIN 41494-7:1987-07

Отменен

Equipment practices for electronic equipment; mechanical structures of the 482,6 mm (19 inch) series; dimensions of cabinets and suites of racks — 4 стр.

DIN EN 60068-1:1995-03

Отменен

Environmental testing - Part 1: General and guidance (IEC 60068-1:1988 + Corrigendum 1988 + A1:1992); German version EN 60068-1:1994 — 18 стр.

DIN EN 60068-2-1:1995-03

Отменен

Environmental testing - Part 2: Tests; tests A: Cold (IEC 60068-2-1:1990 + A1:1993 + A2:1994); German version EN 60068-2-1:1993 + A1:1993 + A2:1994 — 20 стр.

DIN EN 60068-2-2:1994-08

Отменен

Basic environmental testing procedures - Part 2: Tests; tests B: Dry heat (IEC 60068-2-2:1974 + IEC 68-2-2A:1976 + A1:1993); German version EN 60068-2-2:1993 + A1:1993 — 24 стр.

DIN EN 60068-2-2/A2:1995-01

Отменен

Basic environmental testing procedures - Part 2: Tests; tests B: Dry heat (IEC 60068-2-2:1974/A2:1994); German version EN 60068-2-2:1990/A2:1994

DIN EN 60068-2-6:1996-05

Отменен

Environmental testing - Part 2: Tests; test Fc: Vibration (sinusoidal) (IEC 60068-2-6:1995 + Corrigendum 1995); German version EN 60068-2-6:1995 — 26 стр.

DIN EN 60068-2-27:1995-03

Отменен

Basic environmental testing procedures - Part 2: Tests; test Ea and guidance: Shock (IEC 60068-2-27:1987); German version EN 60068-2-27:1993 — 24 стр.

DIN EN 60068-2-75:1998-06

Отменен

Environmental testing - Part 2: Tests; test Eh: Hammer tests (IEC 60068-2-75:1997); German version EN 60068-2-75:1997 — 22 стр.

DIN EN 60297-4:1995-11

Отменен

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 4: Subracks and associated plug-in units - Additional dimensions (IEC 60297-4:1995); German version EN 60297-4:1995 — 15 стр.

DIN EN 60603-2:1999-02

Отменен

Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features (IEC 60603-2:1995); German version EN 60603-2:1998 — 73 стр.

DIN EN 60654-4:1998-08

Действует

Operating conditions for industrial-process measurement and control equipment - Part 4: Corrosive and erosive influences (IEC 60654-4:1987); German version EN 60654-4:1997 — 10 стр.

DIN EN 60917-1:1999-02

Отменен

Modular order for the development of mechanical structures for electronic equipment practices - Part 1: Generic standard (IEC 60917-1:1998); German version EN 60917-1:1998

DIN EN 60917-2:1994-09

Действует

DIN EN 60917-2-1:1995-10

Действует

Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification; interface coordination dimensions for the 25 mm equipment practice; section 1: Detail specification; dimensions for cabinets and racks (IEC 60917-2-1:1993); German version EN 60917-2-1:1995 — 10 стр.

DIN EN 60917-2-2:1996-06

Действует

Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification; interface coordination dimensions for the 25 mm equipment practice; section 2: Detail specification; dimensions for subracks, chassis, backplanes, front panels and plug-in units (IEC 60917-2-2:1994); German version EN 60917-2-2:1996 — 27 стр.

DIN EN 61076-4-100:1999-02

Отменен

Connectors with assessed quality, for use in d.c. and low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 100: Detail specification for two-part connector modules having a grid of 2,5 mm (0,098 in) for printed boards and backplanes (IEC 61076-4-100:1994); German version EN 61076-4-100:1998 — 64 стр.

DIN IEC 60068-2-11:1982-08

Отменен

Basic environmental testing procedures; part 2: tests; test KA: salt mist

DIN IEC 60068-2-30:1986-09

Отменен

Electrical engineering; basic environmental testing procedures; test Db and guidance: damp heat, cyclic (12 + 12-hour cycle); identical with IEC 60068-2-30, edition 1980 (status as of 1985)

DIN IEC 60068-2-42:1985-08

Отменен

Electrical ingeneering; basic environmental testing procedures; tests; test Kc: sulphur dioxide SO <(Index)2> (high concentration) for electrical contacts and connections; identical with IEC 60068-2-42, edition 1982

DIN IEC 60068-2-43:1985-08

Отменен

Electrical engineering; basic environmental testing procedures; tests; test Kd: hydrogen sulphide H<(Index)2>S (high concentration) for electrical contacts and connections; identical with IEC 60068-2-43, edition 1976

DIN IEC 60068-2-49:1985-08

Действует

Electrical engineering; basic environmental testing procedures; guidance to test Kc: sulphur dioxide SO<(Index)2> (high concentration) for electrical contacts and connections; indentical with IEC 68-2-49, edition 1983

DIN IEC 60297-3:1994-08

Отменен

Dimensions of mechanical structures of the 482,6 mm (19in) series - Part 3: Subracks and associated plug-in units (IEC 60297-3:1984 + A1:1992); German version HD 493.3 S2:1993

DIN IEC 60512-2:1994-05

Отменен

Electromechanical components for electronic equipment; basic testing procedures and measuring methods; part 2: general examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests; identical with IEC 60512-2:1985

DIN IEC 60512-2/A1:1995-08

Отменен

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests (IEC 60512-2:1985/A1:1994)

DIN IEC 60068-1:1990-11

Отменен

Electrical engineering; basic environmental testing procedures; general and guidance; identical with IEC 60068-1:1988

DIN IEC 60068-2-18:1991-04

Отменен

Electrical engineering; basic environmental testing procedures; test R and guidance: water; identical with IEC 60068-2-18:1989

DIN IEC 60068-2-28:1991-05

Отменен

Electrical engineering - Environmental testing - Guidance for damp heat tests; identical with IEC 60068-2-28:1990

DIN IEC 60068-2-6:1990-06

Отменен

Electrical engineering; basis environmental testing procedures; test Fc and guidance: vibration (sinusoidal); identical with IEC 60068-2-6:1982 (status as of 1985)

DIN IEC 60068-2-27:1989-08

Отменен

Electrical engineering; basic environmental testing procedures; tests; test Ea and guidance: shock; identical with IEC 60068-2-27:1987

DIN IEC 60654-4:1990-12

Отменен

Operating conditions for industrial-process measurement and control equipment; corrosive and erosive influences; identical with IEC 60654-4:1987

DIN EN 61587-1:2007-11

Отменен

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis (IEC 61587-1:2007); German version EN 61587-1:2007 — 26 стр.

На этот документ ссылаются

DIN EN 61587-1:2007-11

Отменен

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis (IEC 61587-1:2007); German version EN 61587-1:2007 — 26 стр.

DIN EN 60297-5-104:2001-11

Отменен

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-104: Subracks and associated plug-in-units; Keying (IEC 60297-5-104:2001); German version EN 60297-5-104:2001 — 16 стр.

DIN EN 60297-5-102:2001-11

Отменен

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-102: Subracks and associated plug-in-units; Electromagnetic shielding provision (IEC 60297-5-102:2001); German version EN 60297-5-102:2001 — 13 стр.

DIN EN 61969-3:2002-05

Отменен

Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Sectional specification; Climatic, mechanical tests and safety aspects for cabinets and cases (IEC 61969-3:2001); German version EN 61969-3:2001 — 12 стр.

DIN EN 60297-5-107:2001-11

Отменен

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-107: Subracks and associated plug-in-units; Rear-mounted plug-in units (IEC 60297-5-107:2001); German version EN 60297-5-107:2001 — 20 стр.

DIN EN 60297-5-100:2001-11

Отменен

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-100: Subracks and associated plug-in-units; Design overview (IEC 60297-5-100:2001); German version EN 60297-5-100:2001 — 14 стр.

DIN EN 60297-5-103:2001-11

Отменен

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-103: Subracks and associated plug-in-units; Electrostatic discharge protection (IEC 60297-5-103:2001); German version EN 60297-5-103:2001 — 12 стр.

DIN EN 61969-1:2000-09

Отменен

Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines (IEC 61969-1:1999); German version EN 61969-1:2000 — 12 стр.

DIN EN 60297-5-101:2001-11

Отменен

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-101: Subracks and associated plug-in-units; Injector/extractor handle (IEC 60297-5-101:2001); German version EN 60297-5-101:2001 — 13 стр.

DIN EN 61587-2:2001-09

Отменен

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 2: Seismic tests for cabinets and racks (IEC 61587-2:2000); German version EN 61587-2:2001 — 13 стр.

DIN EN 60297-5-105:2001-11

Отменен

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-105: Subracks and associated plug-in-units; Alignment and/or earth pin (IEC 60297-5-105:2001); German version EN 60297-5-105:2001 — 15 стр.