ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm— 6 стр.
Metric external taper screw thread and mating internal parallel screw threads - Part 2: Gauging system, use of gauges, calculation of gauge dimensions and general features— 9 стр.
Compression couplings - Part 2: Assembly instruction for non-soldering compression couplings with cutting rings according DIN 2353 and DIN EN ISO 8434-1— 6 стр.
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels; German version EN 10025-2:2004— 37 стр.
Quenched and tempered steels - Part 2: Technical delivery conditions for unalloyed quality steels (includes Amendment A1:1996); German version EN 10083-2:1991 + A1:1996— 18 стр.
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes; German version EN 10088-3:1995— 34 стр.
Steel pipes for pipe lines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A; German version EN 10208-1:1997— 26 стр.
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10216-1:2002 + A1:2004— 30 стр.
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; German version EN 10222-5:1999— 20 стр.
Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working; German version EN 10263-2:2001— 8 стр.
Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering; German version EN 10263-4:2001— 18 стр.
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes; German version EN 10297-1:2003— 45 стр.
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems; German version EN 10305-4:2003— 20 стр.
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003— 11 стр.
Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:2000); German version EN ISO 3892:2001— 10 стр.
Metallic tube connections for fluid power and general use - Part 1: 24° compression fittings (ISO 8434-1:1994); German version EN ISO 8434-1:1997— 52 стр.
Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 9974-1:1996); German version EN ISO 9974-1:2000— 8 стр.
Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996); German version EN ISO 9974-2:2000— 14 стр.
Connections for general use and fluid power - Ports and studs ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996); German version EN ISO 9974-3:2000— 12 стр.
Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Part 1: Ports with O-ring seal in truncated housing (ISO 6149-1:1993)— 6 стр.
Ports and stud ends with ISO 261 threads and O-ring sealing - Part 2: Heavy duty (S series) stud ends - Dimensions, design, test methods and requirements (ISO 6149-2:1993)— 9 стр.
Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Part 3: Light duty (L series) stud ends; dimensions, design, test methods and requirements (ISO 6149-3:1993)— 9 стр.
Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003)— 18 стр.
Type F stud ends and type W tapped holes with metric fine pitch thread, for use with compression couplings, valves and screw plugs, sealed by O-ring; dimensions— 6 стр.
Stud ends and ports of fittings, valves and plug screws - Part 21: Dimensions for pipe thread according to DIN EN ISO 228-1 and O-ring sealing— 13 стр.
