Gaskets for gas supply - Part 6: Gasket materials based on fibres, graphite or polytetrafluoroethylene (PTFE) for gas valves, gas appliances and gas mains— 14 стр.
Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes (includes Amendment A1:1996); German version EN 377:1993 + A1:1996— 12 стр.
Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids; German version EN 682:2002 + A1:2005— 20 стр.
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds; German version EN 751-1:1996— 7 стр.
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges; German version EN 1092-1:2007— 131 стр.
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges; German version EN 1092-2:1997— 28 стр.
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004— 38 стр.
Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes; German version EN 1254-1:1998— 23 стр.
Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes; German version EN 1254-5:1998— 21 стр.
Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European standards; German version EN 1503-3:2000 + AC:2001— 4 стр.
Flat products made of steels for pressure purposes - Part 1: General requirements (includes Amendment A1:2002); German version EN 10028-1:2000 + A1:2002— 19 стр.
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties; German version EN 10028-2:2003— 26 стр.
Flat products made of steels for pressure purposes - Part 4: Nickel alloyed steels with specified low temperature properties; German version EN 10028-4:2003— 14 стр.
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled; German version EN 10028-5:2003— 13 стр.
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered; German version EN 10028-6:2003— 14 стр.
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings (includes Amendment A1:2002); German version EN 10222-1:1998 + A1:2002— 22 стр.
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties (including corrigendum AC:2000); German version EN 10222-2:1999 + AC:2000— 17 стр.
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength (includes Amendment A1:2001); German version EN 10222-4:1998 + A1:2001— 7 стр.
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; German version EN 10222-5:1999— 20 стр.
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004— 14 стр.
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements; German version prEN 12266-1:2009
Characterization of waste - Methodology for the determination of the leaching behaviour of waste under specified conditions; German version EN 12920:2006+A1:2008— 15 стр.
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1: Compression springs; German version EN 13906-1:2002— 35 стр.
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003— 11 стр.
Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007); German version EN ISO 8434-1:2007— 54 стр.
Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2003); German version EN ISO 9692-1:2003— 23 стр.
