Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
Корзина
DIN
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 50049:1992-04

Отменен
Metallic products; types of inspection documents; products; german version of EN 10204:1991 — 6 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 1690-10:1991-01
Отменен
Technical delivery conditions for castings of metallic materials; supplementary requirements for steel castings used for heavy-duty valves — 7 стр.
DIN 1690-2:1985-06
Отменен
Technical delivery conditions for castings made from metallic materials; steel castings; classification into severity levels on the basis of non-destructive testing — 15 стр.
DIN EN 10021:2007-03
Действует
General technical delivery conditions for steel products; German version EN 10021:2006 — 19 стр.
DIN EN 10204:1995-08
Отменен
Metallic products - Types of inspection documents (includes Amendment A1:1995); German version EN 10204:1991 + A1:1995 — 5 стр.
DIN 50049:1991-11
Отменен
Metallic products; types of inspection documents; german version EN 10204:1991 — 6 стр.

На этот документ ссылаются

DIN 46400-3:1989-04
Отменен
Steel flat products with special magnetic properties; grain-oriented magnetic steel sheet and strip; technical delivery conditions — 10 стр.
DIN 44536:1968-07
Отменен
Vented open-outlet water heater, wall mounting type, also suitable for preparing boiling water, capacity 5 litres; test — 2 стр.
DIN 46448-1:1969-01
Отменен
Insulating Varnishes and Insulating Resin Materials for Electrical Engineering; Impregnating Resin Materials, Test Methods — 10 стр.
DIN 44899-4:1980-03
Действует
Thermal storage water heater; calculation of thickness of the wall of boilers up to 50 litres rated capacity, safety requirements — 2 стр.
DIN 46400-1:1983-04
Отменен
Steel flat products with special magnetic properties; cold rolled, non-oriented, finally annealed magnetic sheet and strip; technical delivery conditions — 8 стр.
DIN 46400-4:1987-01
Отменен
Steel flat products with special magnetic properties; magnetic sheet and strip of alloyed steels, cold rolled, nonoriented, delivered in the semi-processed state; technical delivery conditions — 6 стр.
DIN 46400-2:1987-01
Отменен
Steel flat products with special magnetic properties; magnetic sheet and strip of unalloyed steels, cold rolled, nonoriented, delivered in the semi-processed state; technical delivery conditions — 7 стр.
DIN 54152-2:1983-06
Отменен
Non-destructive testing; penetrant testing; verification of penetrant testing materials — 7 стр.
DIN 55418:1970-12
Отменен
Stacking boxes of plastics for 30 beer bottles (0,33 l Steinietype) — 2 стр.
DIN 53211:1974-04
Отменен
Testing of Paints, Varnishes and Similar Products; Determination of the Flow Time by the DIN 4 Cup — 4 стр.
DIN 55427:1971-05
Отменен
Stacking boxes of plastics for 12 bottles — 3 стр.
DIN 55419:1970-12
Отменен
Stacking boxes of plastics for 20 beer bottles (0,33 l Steinietype) — 2 стр.
DIN 55416:1970-12
Отменен
Stacking boxes of plastics for 20 beer bottles (0,5 l) — 2 стр.
DIN 55515-1:1989-05
Отменен
Mailing packages for medical and biological specimens; concepts, requirements, test — 9 стр.
DIN 55928-8:1994-07
Отменен
Protection of steel structures from corrosion by organic and metallic coatings; part 8: protection of supporting thin-walled building components from corrosion — 20 стр.
DIN 55421:1972-08
Отменен
Stacking boxes of plastics for 24 beer bottles (0,33 l Vichytype) — 2 стр.
DIN 55928-5:1991-05
Отменен
Corrosion protection of steel structures by the application of organic or metallic coatings; coating materials and protective systems — 23 стр.
DIN 55928-5:1980-03
Отменен
Corrosion Protection of Steel Structures by Organic and Metallic Coatings; Coating Materials and Protective Systems — 22 стр.
DIN 53211:1987-06
Отменен
Paints, varnishes and similar coating materials; determination of flow time using the DIN flow cup — 5 стр.
DIN 54152-2:1989-07
Отменен
Non-destructive testing; penetrant inspection; verification of penetrant inspection materials — 7 стр.
DIN 55417:1970-12
Отменен
Stacking boxes of plastics for 20 beer bottles (0,5 l Eurotype) — 2 стр.
DIN 86028:1991-05
Отменен
Weld neek stub ends of CuNi10Fe1,6Mn; technical delivery conditions — 4 стр.
DIN 86552:1973-04
Отменен
Steel Screwed Bonnet Valves with Non-soldered Cutting Ring-Type Pipe Unions — 5 стр.
DIN 86501:1973-07
Отменен
Gunmetal Screwed-bonnet Type Shut-off Valves with Non-soldered Cutting Ring - Type Pipe Unions — 6 стр.
DIN 86511:1973-07
Отменен
Shut-off valves, screwed-bonnet type of gun metal with 25° taper-bushing pipe unions for brazing — 6 стр.
DIN 86512:1973-07
Отменен
Shut-off check valves, screwed-bonnet type of gun metal with 25° taper-bushing pipe unions for brazing — 6 стр.
DIN 86502:1973-07
Отменен
Gunmetal Screwed bonnet Non-return Valves with Non-soldered Pipe Unions with Cutting Ring — 6 стр.
DIN 86211:1968-11
Отменен
Fire valves for nominal pressure 16, with fire hose coupling type C or B and with flange connection — 4 стр.
DIN 86551:1973-04
Отменен
Steel screwed bonnet valves with 25° taper-bushing, type pipe unions — 5 стр.
DIN 86075:1982-09
Отменен
Compressed asbestos fibre sheets; shipbuilding quality; dimensions, requirements, testing — 4 стр.
DIN 86086:1990-08
Отменен
Copper-nickel alloy welding pipe fittings; technical delivery conditions — 8 стр.
DIN 86033:1980-09
Отменен
Soldered flanges for tubes of copper and copper alloys, nominal pressure 10 — 4 стр.
DIN 58830:1974-09
Отменен
Instruments for intramedullary nailing; slotted hammer — 1 стр.
DIN 58298-15:1972-01
Отменен
Materials, finish and testing of medical instruments; explorers, filling- and carving instruments — 2 стр.
DIN 58948-5:1989-10
Отменен
Sterilization; gas-sterilizers; small sized ethyleneoxide sterilizers; requirements on the equipment, operating media, structural requirements — 10 стр.
DIN 58948-2:1987-10
Отменен
Sterilization; gas sterilizers; ethyleneoxide-big-sterilizers; requirements — 8 стр.
DIN 58298-2:1981-10
Отменен
Materials, finish and testing of medical instruments; scissors — 4 стр.
DIN 58953-2:1987-01
Отменен
Sterilization; sterile supply; sterilization paper for bags and tube packings; requirements — 2 стр.
DIN 58806:1972-01
Действует
Instruments for intramedullary nailing; nail extractor — 1 стр.
DIN 58953-3:1981-11
Отменен
Sterilization; Sterile supply; Paper bags; Dimensions, requirements, testing — 5 стр.
DIN 58953-5:1982-11
Отменен
Sterilization; sterile supply, creped and plain sterilization paper for envelop of sterilization goods; requirements, test — 3 стр.
DIN 58809:1972-01
Действует
Instruments for intramedullary nailing; intermedullary canal reamer — 2 стр.
DIN 58298-16:1975-09
Отменен
Materials, finish and testing of medical instruments; scalers — 2 стр.
DIN 58298-11:1979-06
Отменен
Materials, finish and testing of medical instruments; mallets — 3 стр.
DIN 58802-2:1972-01
Действует
Instruments for intramedullary nailing; guide pin — 2 стр.
DIN 58298-3:1979-07
Отменен
Materials, finish and testing of medical instruments; forceps — 3 стр.
DIN 58803:1972-01
Действует
Instruments for intramedullary nailing; gauge — 1 стр.
DIN 58805-1:1972-01
Действует
Instruments for intramedullary nailing; extracting hook with thread — 1 стр.
DIN 58953-4:1982-11
Отменен
Sterilization; sterile supply; transparent sterilized packages; dimensions, requirements, test — 7 стр.
DIN 58948-2:1982-07
Отменен
Sterilization; gas-sterilizers; ethyleneoxide-big-sterilizers; requirements — 8 стр.
DIN 58804-2:1972-01
Действует
Instruments for intramedullary nailing; nail impactors — 2 стр.
DIN 58800-2:1979-10
Отменен
Surgical implants; technical requirements and testing for bone screws of stainless steel — 2 стр.
DIN 58953-3:1987-01
Отменен
Sterilization; sterile supply; paper bags; dimensions, requirements, test — 6 стр.
DIN 58298-12:1994-04
Отменен
Materials, finish and testing of medical instruments; hand saws — 5 стр.
DIN 58648-1:1989-08
Отменен
Respiratory equipment; compressed air line breathing apparatus incorporating a full face mask, a half mask or a mouthpiece assembly; safety requirements, testing, marking — 8 стр.
DIN 58953-5:1987-05
Отменен
Sterilization; sterile supply; crepe and smooth sheets of sterilization paper for wrapping sterilized goods; requirements, testing — 4 стр.
DIN 58950-2:1987-04
Отменен
Sterilization; steam-sterilizers for pharmaceutical products; apparatus requirements — 22 стр.
DIN 58948-5:1982-02
Отменен
Sterilization; gas-sterilizers; ethyleneoxide smal sterilizers; requirements — 8 стр.
DIN 58953-4:1987-01
Отменен
Sterilization; sterile supply; transparent sterilized packages; dimensions, requirements, test — 7 стр.
DIN 58802-1:1972-01
Действует
Instruments for intramedullary nailing; guide pin — 2 стр.
DIN 58298-17:1975-09
Отменен
Materials, finish and testing of medical instruments; extracting forceps — 2 стр.
DIN 58804-3:1974-09
Отменен
Instruments for intramedullary nailing; nail drivers — 1 стр.
DIN 58298-5:1979-07
Отменен
Materials, finish and testing of medical instruments; forceps — 2 стр.
DIN 58807:1972-01
Действует
Instruments for intramedullary nailing; trochanteric reamer — 1 стр.
DIN 43763:1964-03
Отменен
Electrical temperature measuring instruments; metal protecting tubes for thermocouple- and resistance-thermometers — 8 стр.
DIN 43763:1986-03
Отменен
Measurement and control; electrical temperature sensors; metal protecting tubes for thermometers with inserted sensor units — 12 стр.
DIN EN 10214:1995-04
Отменен
Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions; German version EN 10214:1995 — 9 стр.
DIN EN 10209:1996-05
Отменен
Cold rolled low carbon steel flat products for vitrious enamelling - Technical delivery conditions; German version EN 10209:1996 — 16 стр.
DIN EN 10215:1995-04
Отменен
Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions; German version EN 10215:1995 — 8 стр.
DIN EN 10113-1:1993-04
Отменен
Hot-rolled products in weldable fine grain structural steels; part 1: general delivery conditions; German version EN 10113-1:1993 — 15 стр.
DIN EN 10016-1:1995-04
Отменен
Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements; German version EN 10016-1:1994 — 9 стр.
DIN EN 10242:1995-03
Действует
Threaded pipe fittings in malleable cast iron; German version EN 10242:1994 — 34 стр.
DIN EN 10163-1:1991-10
Отменен
Technical delivery conditions for the surface condition of hot rolled steel plate, wide flats and sections; general requirements; german version EN 10163-1:1991 — 8 стр.
DIN EN 10025:1994-03
Отменен
Hot rolled products of non-alloy structural steels; technical delivery conditions (includes amendment A1:1993); German version EN 10025:1990 — 26 стр.
DIN EN 10088-3:1995-08
Отменен
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods and sections for general purposes; German version EN 10088-3:1995 — 34 стр.
DIN EN 10204:1995-08
Отменен
Metallic products - Types of inspection documents (includes Amendment A1:1995); German version EN 10204:1991 + A1:1995 — 5 стр.
DIN EN 10210-1:1994-09
Отменен
Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 1: Technical delivery requirements; German version EN 10210-1:1994 — 19 стр.
DIN EN 10083-3:1996-02
Отменен
Quenched and tempered steels - Part 3: Technical delivery conditions for boron steels; German version EN 10083-3:1995 — 17 стр.
DIN EN 10248-1:1995-08
Заменен
Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions; German version EN 10248-1:1995 — 9 стр.
DIN EN 10088-2:1995-08
Отменен
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip for general purposes; German version EN 10088-2:1995 — 40 стр.
DIN EN 10152:1993-12
Отменен
Electrolytically zinc coated cold rolled steel flat products; technical delivery conditions; German version EN 10152:1993 — 13 стр.
DIN EN 10155:1993-08
Отменен
Structural steels with improved atmospheric corrosion resistance; technical delivery conditions; German version EN 10155:1993 — 21 стр.
DIN EN 10025:1991-01
Отменен
Hot-rolled unalloyed structural steel products; technical delivery conditions; german version EN 10025:1990 — 27 стр.
DIN EN 10130:1991-10
Отменен
Cold rolled flat steel products for cold forming; technical delivery conditions; german version of EN 10130:1991 — 11 стр.
DIN EN 10249-1:1995-08
Действует
Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions; German version EN 10249-1:1995 — 6 стр.
DIN EN 10028-1:1993-04
Отменен
Flat products made from steel for pressure purposes; part 1: general requirements; german version EN 10028-1:1992 — 9 стр.
DIN 17674-2:1963-06
Отменен
Copper and Wrought Copper Alloy Extruded Sections; Technical Conditions of Delivery — 2 стр.
DIN 17677-2:1974-06
Отменен
Wire of Copper and Wrought Copper Alloys; Technical Conditions of Delivery — 2 стр.
DIN 17480:1984-09
Отменен
Valve materials; technical delivery conditions — 12 стр.
DIN 17679:1983-10
Отменен
Wrought copper and copper alloy tubes with rolled fins for use in heat exchangers — 8 стр.
DIN 17212:1972-08
Отменен
Flame and Induction Hardening Steels; Quality Specifications — 14 стр.
DIN 18036:1992-11
Отменен
Ice-sport facilities; ice-sport facilities with artificial ice; rules for planning and construction — 23 стр.
DIN 17245:1987-12
Отменен
Ferritic steel castings with elevated temperature properties; technical delivery conditions — 16 стр.
DIN 17459:1992-09
Отменен
Seamless circular high-temperature austenitic steel tubes; technical delivery conditions — 19 стр.
DIN 17163:1988-03
Отменен
Steel flat products; electrolytically zinc coated cold rolled strip and sheet; technical delivery conditions — 6 стр.
DIN 18036-1:1980-05
Отменен
Ice-sport facilities; halls for ice sport, rules for planning and construction — 20 стр.
DIN 18335:1979-10
Отменен
Contract Procedure for Building Works; Part C: General Technical Specifications for Building Works; Steel Construction Works — 10 стр.
DIN 17455:1985-07
Отменен
General purpose welded circular stainless steel tubes; technical delivery conditions — 14 стр.
DIN 17652:1982-06
Отменен
Copper drawing stock — 3 стр.
DIN 17350:1980-10
Отменен
Tool Steels; Technical Conditions of Delivery — 27 стр.