DIN 908:2012-04

Отменен

Internal drive screw plugs with collar - Cylindrical thread — 17 стр.

Ссылочные документы

DIN 13-5:1999-11

Действует

ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm — 6 стр.

DIN 13-6:1999-11

Действует

ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm — 6 стр.

DIN 13-7:1999-11

Действует

ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; nominal diameter from 17 mm to 300 mm — 6 стр.

DIN 267-2:1984-11

Отменен

Fasteners; technical delivery conditions; design and dimensional accuracy — 4 стр.

DIN 906:2012-04

Отменен

Internal drive pipe plugs - Conical thread — 12 стр.

DIN 909:2012-04

Отменен

Hexagon head pipe plugs - Conical thread — 10 стр.

DIN 910:2012-04

Отменен

Hexagon head screw plugs with collar - Cylindrical thread — 14 стр.

DIN 962:2001-11

Отменен

Bolts, screws, studs and nuts - Designation, types and finishes — 12 стр.

DIN 3852-1:2002-05

Отменен

Ports and stud ends with metric fine pitch thread, for use with compression couplings, valves and screw plugs; Dimensions — 10 стр.

DIN 3852-2:2000-11

Отменен

Stud ends, ports, for fittings, valves - Plug screw with Whitworth pipe thread - General outlay of types — 7 стр.

DIN 5586:1989-02

Действует

Compressed air equipment for rail vehicles; locking screws with collar and vent — 3 стр.

DIN 7603:2001-05

Действует

Sealing rings — 10 стр.

DIN 7604:1992-01

Отменен

Light-duty hexagon head screw plugs — 3 стр.

DIN 34824:2007-11

Отменен

12 point socket for bolts and screws — 3 стр.

DIN EN 10087:1999-01

Отменен

Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods; German version EN 10087:1998 — 14 стр.

DIN EN 10263-2:2002-02

Отменен

Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working; German version EN 10263-2:2001 — 8 стр.

DIN EN 10277-3:2008-06

Отменен

Bright steel products - Technical delivery conditions - Part 3: Free-cutting steels; German version EN 10277-3:2008 — 11 стр.

DIN EN 12476:2001-10

Отменен

Phosphate conversion coatings of metals - Method of specifying requirements; German version EN 12476:2000 — 15 стр.

DIN EN 26157-3:1991-12

Действует

Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991 — 16 стр.

DIN EN 28839:1991-12

Действует

Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991 — 8 стр.

DIN EN ISO 225:2011-02

Действует

Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010); Multilingual version EN ISO 225:2010 — 65 стр.

DIN EN ISO 228-1:2003-05

Действует

Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000); German version EN ISO 228-1:2003 — 11 стр.

DIN EN ISO 3269:2000-11

Отменен

Fasteners - Acceptance inspection (ISO 3269:2000); English version of DIN EN ISO 3269 — 22 стр.

DIN EN ISO 3506-1:2010-04

Отменен

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009); German version EN ISO 3506-1:2009 — 35 стр.

DIN EN ISO 3506-2:2010-04

Отменен

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009); German version EN ISO 3506-2:2009 — 28 стр.

DIN EN ISO 3506-3:2010-04

Действует

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009); German version EN ISO 3506-3:2009 — 24 стр.

DIN EN ISO 4042:2001-01

Отменен

Fasteners - Electroplated coatings (ISO 4042:1999); German version EN ISO 4042:1999 — 26 стр.

DIN EN ISO 4759-1:2001-04

Действует

Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000 — 65 стр.

DIN EN ISO 10664:2005-10

Отменен

Hexalobular internal driving feature for bolts and screws (ISO 10664:2005); German version EN ISO 10664:2005 — 11 стр.

DIN EN ISO 10683:2011-03

Отменен

Fasteners - Non-electrolytically applied zinc flake coatings (ISO/DIS 10683:2011); German version prEN ISO 10683:2011

DIN ISO 965-1:1999-11

Отменен

ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data (ISO 965-1:1998) — 20 стр.

DIN ISO 2768-1:1991-06

Действует

General tolerances; tolerances for linear and angular dimensions without individual tolerance indications; identical with ISO 2768-1:1989 — 5 стр.

DIN ISO 8992:2005-09

Действует

Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) — 9 стр.

BS ISO 9974-4:2016

Действует

Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing. Dimensions, design, test methods and requirements for external hex and internal hex port plugs — 22 стр.

DIN 908:2020-02

Действует

Internal drive screw plugs with collar - Cylindrical thread — 16 стр.

DIN 908:1992-01

Отменен

Hexagon socket screw plugs — 3 стр.

DIN 908:2010-10

Отменен

Hexagon socket screw plugs - cylindrical thread