Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN EN 60384-19:2016-04

Действует
Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors (IEC 60384-19:2015); German version EN 60384-19:2015 — 32 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN IEC 60062:1993-03
Отменен
Marking codes for resistors and capacitors; identical with IEC 60062:1992
DIN IEC 60063:1985-12
Отменен
Preferred number series for resistors and capacitors; identical with IEC 60063, edition 1963 — 4 стр.
DIN IEC 60068-1:1990-11
Отменен
Electrical engineering; basic environmental testing procedures; general and guidance; identical with IEC 60068-1:1988
DIN IEC 60068-2-18:1991-04
Отменен
Electrical engineering; basic environmental testing procedures; test R and guidance: water; identical with IEC 60068-2-18:1989
DIN IEC 60068-2-28:1991-05
Отменен
Electrical engineering - Environmental testing - Guidance for damp heat tests; identical with IEC 60068-2-28:1990
DIN IEC 60068-2-59:1993-01
Отменен
Environmental testing; test Fe: vibration, sine-beat method; identical with IEC 60068-2-59:1990
DIN IEC 60068-2-6:1990-06
Отменен
Electrical engineering; basis environmental testing procedures; test Fc and guidance: vibration (sinusoidal); identical with IEC 60068-2-6:1982 (status as of 1985)
DIN IEC 60068-2-7:1990-04
Отменен
Electrical engineering; basic environmental testing procedures; test Ga and guidance: acceleration, staedy state; identical with IEC 60068-2-7:1983 (status as of 1986)
DIN IEC 60068-2-10:1991-04
Отменен
Electrical engineering; environmental testing procedures test J and guidance: mould growth; identical with IEC 60068-2-10:1988
DIN IEC 60068-2-11:1982-08
Отменен
Basic environmental testing procedures; part 2: tests; test KA: salt mist
DIN IEC 60068-2-13:1985-08
Отменен
Electrical engineering; basic environmental testing procedures; tests; test M: low air pressure; identical with IEC 60068-2-13, edition 1983
DIN IEC 60068-2-14:1987-06
Отменен
Electrical engineering; basic environmental testing procedures; tests; test N: change of temperature; identical with IEC 60068-2-14, edition 1984 (status as of 1986)
DIN IEC 60068-2-17:1991-03
Отменен
Electrical engineering; basic environmental testing procedures; test Q: sealing; identical with IEC 60068-2-17:1978 (status as of 1989)
DIN IEC 60068-2-20:1991-04
Отменен
Electrical engineering; basic environmental testing procedures; test T: soldering; identical with IEC 60068-2-20:1979 (status as of 1987)
DIN IEC 60068-2-21:1985-08
Отменен
Electrical engineering; basic environmental testing procedures; tests; test U: robustness of terminations and integral mounting devices; identical with IEC 60068-2-21, edition 1983
DIN IEC 60068-2-27:1989-08
Отменен
Electrical engineering; basic environmental testing procedures; tests; test Ea and guidance: shock; identical with IEC 60068-2-27:1987
DIN IEC 60068-2-30:1986-09
Отменен
Electrical engineering; basic environmental testing procedures; test Db and guidance: damp heat, cyclic (12 + 12-hour cycle); identical with IEC 60068-2-30, edition 1980 (status as of 1985)
DIN IEC 60068-2-31:1984-04
Отменен
Basic environmental testing procedures; part 2: tests; test Ec: drop and topple, primarily for equipment-type specimens
DIN IEC 60068-2-38:1979-04
Отменен
Basic Environmental Testing Procedures; Part 2: Tests, Test Z/AD: Composite Temperature/Humidity, Cyclic Test
DIN IEC 60068-2-39:1979-12
Отменен
Basic environmental testing procedures; part 2: tests, test Z/AMD: combined sequential cold, low air pressure and damp heat test
DIN IEC 60068-2-40:1985-08
Отменен
Electrical ingeneering; basic environmental testing procedures; tests; test Z/AM: combined cold/low air pressure tests; identical with IEC 60068-2-40, edition 1976
DIN IEC 60068-2-41:1985-08
Отменен
Electrical ingeneering; basic environmental testing procedures; tests; test Z/BM: combined dry heat/low air pressure tests; identical with IEC 60068-2-41, edition 1976
DIN IEC 60068-2-42:1985-08
Отменен
Electrical ingeneering; basic environmental testing procedures; tests; test Kc: sulphur dioxide SO <(Index)2> (high concentration) for electrical contacts and connections; identical with IEC 60068-2-42, edition 1982
DIN IEC 60068-2-43:1985-08
Отменен
Electrical engineering; basic environmental testing procedures; tests; test Kd: hydrogen sulphide H<(Index)2>S (high concentration) for electrical contacts and connections; identical with IEC 60068-2-43, edition 1976
DIN IEC 60068-2-44:1980-12
Отменен
Basic environmental testing procedures; part 2: tests, guidance on test T: soldering
DIN IEC 60068-2-45:1981-10
Отменен
Basic environmental testing procedures; part 2: tests, test XA and guidance: immersion in cleaning solvents
DIN IEC 60068-2-46:1985-08
Действует
Electrical ingeneering; basic environmental testing procedures; tests; guidance to test Kd: hydrogen sulphide H<(Index)2>S (high concentration) for electrical contacts and connections; identical with IEC 60068-2-46, edition 1982
DIN IEC 60068-2-47:1985-06
Отменен
Electrotechnic; basic environmental testing procedures; mounting of components, equipment and other articles for dynamic tests including shock (Ea), bump (Eb),vibration (Fc and Fd) and steady-state acceleration (Ga) and guidance; identical with IEC 60068-2-47, edition 1982
DIN IEC 60068-2-49:1985-08
Действует
Electrical engineering; basic environmental testing procedures; guidance to test Kc: sulphur dioxide SO<(Index)2> (high concentration) for electrical contacts and connections; indentical with IEC 68-2-49, edition 1983
DIN IEC 60068-2-52:1985-07
Отменен
Electronic; basic environmental testing procedures; tests; test Kb: salt mist, cyclic (sodium chloride solution); identical with IEC 60068-2-52, edition 1984
DIN IEC 60068-2-53:1986-10
Отменен
Electrical engineering; basic environmental testing procedures; guidance to tests Z/AFc and Z/BFc: combined temperature (cold and dry heat) and vibration (sinusoidal) tests; identical with IEC 60068-2-53, edition 1984
DIN IEC 60068-2-54:1988-01
Отменен
Electrical engineering; basic environmental testing procedures; tests T; soldering; test Ta; solderability testing by the wetting balance method; identical with IEC 60068-2-54, edition 1985
DIN IEC 60068-2-55:1989-08
Отменен
Electrical engineering; basic environmental testing procedures; tests; test Ee and guidance: bounce; identical with IEC 60068-2-55:1987
DIN IEC 60068-2-57:1991-04
Отменен
Electrical engineering; environmental testing; test Ff: vibration, time-history method; identical with IEC 60068-2-57:1989
DIN IEC 60068-2-58:1992-04
Отменен
Electrical engineering; environmental testing; test Td: solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD); identical with IEC 60068-2-58:1989
IEC 60068-2-60:2015 ed3.0
Действует
Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test — 37 стр.
IEC 60068-2-61:1991 ed1.0
Отменен
Environmental testing - Part 2-61: Test methods - Test Z/ABDM:Climatic sequence — 17 стр.
IEC 60068-2-64:2008 ed2.0
Действует
Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance — 71 стр.
IEC 60068-2-65:2013 ed2.0
Действует
Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method — 61 стр.
IEC 60068-2-66:1994 ed1.0
Действует
Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour) — 33 стр.
IEC 60068-2-67:1995 ed1.0
Действует
Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components — 9 стр.
IEC 60068-2-68:1994 ed1.0
Действует
Environmental testing - Part 2-68: Tests - Test L: Dust and sand — 64 стр.
IEC 60068-2-69:2007 ed2.0
Заменен
Environmental testing - Part 2-69: Tests - Test Te: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method — 50 стр.
IEC 60068-2-70:1995 ed1.0
Действует
Environmental testing - Part 2-70: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands — 10 стр.
IEC 60068-2-74:1999 ed1.0
Действует
Environmental testing - Part 2: Tests - Test Xc: Fluid contamination — 25 стр.
IEC 60068-2-75:2014 ed2.0
Действует
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests — 65 стр.
IEC 60068-2-77:1999 ed1.0
Заменен
Environmental testing - Part 2-77: Tests - Test 77: Body strength and impact shock — 21 стр.
IEC 60068-2-78:2012 ed2.0
Действует
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state — 17 стр.
IEC 60068-2-80:2005 ed1.0
Действует
Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode — 83 стр.
IEC 60068-2-81:2003 ed1.0
Действует
Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis — 73 стр.
IEC 60068-2-82:2007 ed1.0
Заменен
Environmental testing - Part 2-82: Tests - Test XW1: Whisker test methods for electronic and electric components — 66 стр.
DIN IEC 60068-2-83:2007-09
Отменен
Environmental Testing - Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using lead-free solder paste (IEC 91/682/CD:2007)
DIN IEC 60068-3-1A:1980-04
Отменен
First supplement to publication 60068-3-1 (1974): basic environmental testing procedures; part 3: background information, section one - cold and dry heat tests
DIN IEC 60068-3-2:1979-04
Отменен
Basic Environmental Testing Procedures; Part 3: Background Information, Section Two - Combined Temperature/Low Air Pressure Tests
DIN IEC 60068-3-3:1993-09
Действует
Environmental testing; seismic test methods for equipments; guidance; identical with IEC 60068-3-3:1991
IEC 60068-3-4:2001 ed1.0
Заменен
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests — 31 стр.
IEC 60068-3-5:2001 ed1.0
Заменен
Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers — 21 стр.
IEC 60068-3-6:2001 ed1.0
Заменен
Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers — 19 стр.
IEC 60068-3-7:2001 ed1.0
Заменен
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load) — 19 стр.
IEC 60068-3-8:2003 ed1.0
Действует
Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests — 45 стр.
IEC 60068-3-11:2007 ed1.0
Действует
Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers — 68 стр.
DIN IEC 60068-5-2:1992-05
Отменен
Electrical engineering; environmental testing; guide to drafting of test methods; terms and definitions; identical with IEC 60068-5-2:1990
DIN IEC 60384-13/A1:2010-04
Отменен
Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors (IEC 40/2037/CD:2010)
DIN IEC 60384-19-1:1994-07
Отменен
Fixed capacitors for use in electronic equipment; part 19: blank detail specification: fixed metallized polyethylene-terephthalate film dielectric chip d.c. capacitors; assessment level E (IEC 60384-19-1:1993)
IEC 61193-2:2007 ed1.0
Действует
Quality assessment systems - Part 2: Selection and use of sampling plans for inspection of electronic components and packages — 18 стр.
DIN EN 60384-19:2006-09
Отменен
Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors (IEC 60384-19:2006); German version EN 60384-19:2006 — 24 стр.
DIN EN 60384-19:2013-08
Отменен
Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors (IEC 40/2211/CDV:2013)
DIN EN 60384-19 Berichtigung 1:2008-11
Отменен
Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors (IEC 60384-19:2006); German version EN 60384-19:2006, Corrigendum to DIN EN 60384-19:2006-09; German version CENELEC-Cor. :2006 to EN 60384-19:2006 — 2 стр.

На этот документ ссылаются

DIN EN 60384-19 Berichtigung 1:2008-11
Отменен
Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors (IEC 60384-19:2006); German version EN 60384-19:2006, Corrigendum to DIN EN 60384-19:2006-09; German version CENELEC-Cor. :2006 to EN 60384-19:2006 — 2 стр.
DIN EN 60384-19:2006-09
Отменен
Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors (IEC 60384-19:2006); German version EN 60384-19:2006 — 24 стр.
DIN EN 60384-20:2008-10
Отменен
Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors (IEC 60384-20:2008 + Corrigendum 2008); German version EN 60384-20:2008 — 28 стр.