Bushing for separable accessories for power cable with protruding cone; U<(Index)m> up to 36 kV, dimensions of the arrangement for bushings and separable connectors— 5 стр.
Separable accessories for power cable for bushing with outside cone; U<(Index)m> up to 36 kV, bushing with mounting flange and screw-fastening for the separable connector— 3 стр.
Separable accessories for power cable for bushing with outside cone; U<(Index)m> up to 36 kV, bushing without mounting flange and eyelet-fastening for the separable connector— 3 стр.
Separable accessories for power cable for bushing with outside cone; U<(Index)m> up to 36 kV, bushing without mounting flange and screw-fastening for the separable connector— 3 стр.
Bushing for separable accessories for power cable with protruding cone; U<(Index)m> up to 36 kV, bushing with mounting flange and threaded inserts for the separable connector— 4 стр.
Bushing for separable accessories for power cable with protruding cone; U<(Index)m> up to 36 kV, bushing without mounting flange and threaded inserts for the separable connector— 4 стр.
Hand crimping tools - Tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications; German version EN 50109-2-5:1995— 12 стр.
Hand crimping tools - Tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors; German version EN 50109-2-3:1995— 20 стр.
Hand crimping tools - Tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-2: Particular requirements for radio frequency connectors and concentric contacts; open throat tools with removable and interchangeable dies, sizes A to G, Q bis T, V and W; German version EN 50109-2-2:1995— 9 стр.
Hand crimping tools - Tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-4: Particular requirements for centre contacts of RF connectors, series SMZ; German version EN 50109-2-4:1995— 12 стр.
Hand crimping tools - Tools for the crimp termination of electrical cables and wires for low frequency and radio frequency applications - Part 2-1: Particular requirements for radio frequency connectors and concentric contacts; open throat tools with fixed dies, sizes A to E, V and W; German version EN 50109-2-1:1995— 8 стр.
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969 + Supplements A:1970 to T:1996, modified); German version EN 60061-3:1993 + A1:1995 + A2:1995 + A3:1995 + A4:1996 + A5:1996 + A6:1996— 542 стр.
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated cicuits (IEC 60603-12:1992); German version EN 60603-12:1998— 19 стр.
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969 + Supplements A:1970 to U:1997 + A20:1998 to A26:2001, modified); German version EN 60061-3:1993 + A1:1995 to A7:1997 + A20:1998 to A26:2001— 588 стр.
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information (IEC 60064-4:1990 + supplements A:1992, B:1994, C:1994, D:1995 + A5:1998 to A8:2003, modified); German version EN 60061-4:1992 + A1:1995 to A8:2003— 62 стр.
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969 + Supplements A:1970 to S:1996, modified); German version EN 60061-3:1993 + A1:1995 + A2:1995 + A3:1995 + A4:1996 + A5:1996— 537 стр.
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information (IEC 60061-4:1990 + Supplements A:1992 and B:1994, modified); German version EN 60061-4:1992 + A1:1995— 37 стр.
Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors; Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 × 2,54 mm centre-line (IEC 61076-3-101:1997); German version EN 61076-3-101:1997— 48 стр.
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information (IEC 60061-4:1990 + Supplements A:1992, B:1994, C:1994 and D:1995 modified); German version EN 60061-4:1992 + A1:1995 + A2:1995 + A3:1995— 43 стр.
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969 + Supplements A:1970 to R:1996, modified); German version EN 60061-3:1993 + A1:1995 + A2:1995 + A3:1995 + A4:1996— 523 стр.
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969 + Supplements A:1970 to N:1994, modified); German version EN 60061-3:1993 + A1:1995— 479 стр.
Connectors for frequencies below 3 MHz for use with printed boards - Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality (IEC 60603-7:1996); German version EN 60603-7:1997— 74 стр.
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969 + Supplements A:1970 to P:1994, modified); German version EN 60061-3:1993 + A1:1995 + A2:1995— 484 стр.
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969 + Supplements A:1970 to U:1997 + A20:1998 to A29:2002, modified); German version EN 60061-3:1993 + A1:1995 to A7:1997 + A20:1998 to A29:2002— 657 стр.
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance (IEC 61300-1:1995); German version EN 61300-1:1997— 11 стр.
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969 + Supplements A:1970 to Q:1994, modified); German version EN 60061-3:1993 + A1:1995 + A2:1995 + A3:1995— 496 стр.
Connectors for frequencies below 3 MHz for use with printed boards; part 7: detail specification for connectors, 8-way, including fixed and free connectors with common mating features (IEC 60603-7:1990); German version EN 60603-7:1993— 60 стр.
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969 + supplement A:1970 to U:1997 + A20:1998 to A27:2002 + A28:2002, modified); German version EN 60061-3:1993 + A1:1995 to A7:1997 + A20:1998 to A27:2002 + A28:2002— 654 стр.
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969 + Supplements A:1970 to M:1994, modified); German version EN 60061-3:1993— 424 стр.
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information (IEC 60061-4:1990 + supplements A:1992, B:1994, C:1994, D:1995 + A5:1998 to A7:2001, modified); German version EN 60061-4:1992 + A1:1995 to A7:2001— 51 стр.
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges; German version EN 1092-2:1997— 28 стр.
Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connectors (ISO 5599-1:1989)— 8 стр.
Plastics - Determination of environmental stress cracking (ESC) - Ball or pin impression method (ISO 4600:1992); German version EN ISO 4600:1997 — 10 стр.
Testing of Ceramic Raw and Finished Materials; Determination of the Compressive Strength at Room Temperature (KDF) of Refractories with a Total Porosity exceeding 45%— 4 стр.
Testing of Ceramic Raw and Finished Materials; Determination of the Compressive Strength at Room Temperature (KDF) of Refractories with a Total Porosity of up to 45%— 4 стр.
Determination of surface roughness parameters R<(Index)K>, R<(Index)PK>, R<(Index)VK>, M<(Index)r1>, M<(Index)r2> serving to describe the material component of the roughness profile— 5 стр.
Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Lock fittings; German version EN 1707:1996— 11 стр.
