Corrosion of metals and alloys - Comparative account of accelerated corrosion test methods and of their suitability for different fields of application and corrosion protection systems— 28 стр.
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) (IEC 60068-2-30:2005); German version EN 60068-2-30:2005— 15 стр.
Environmental testing - Part 2: Tests, Test Kb: Salt mist, cyclic (sodium chloride solution) (IEC 60068-2-52:1996); German version EN 60068-2-52:1996— 9 стр.
Classification of environmental conditions - Part 1: Environmental parameters and their severities (IEC 60721-1:1990 + A1:1992 + A2:1995); German version EN 60721-1:1995 + A2:1995— 21 стр.
Classification of environmental conditions; part 3: classification of groups of environmental parameters and their severities; introduction (IEC 60721-3-0:1984 + A1:1987); German version EN 60721-3-0:1993— 9 стр.
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities; section 3: Stationary use at weatherprotected locations (IEC 60721-3-3:1994); German version EN 60721-3-3:1995— 37 стр.
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities; section 3: Stationary use at weatherprotected locations; Amendment A2 (IEC 60721-3-3:1994/A2:1996); German version EN 60721-3-3:1995/A2:1997— 6 стр.
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weatherprotected locations (IEC 60721-3-4:1995); German version EN 60721-3-4:1995— 20 стр.
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities; section 4: Stationary use at non-weatherprotected locations; Amendment A1 (IEC 60721-3-4:1995/A1:1996); German version EN 60721-3-4:1995/A1:1997— 6 стр.
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities; Section 5: Ground vehicle installations (IEC 60721-3-5:1997); German version EN 60721-3-5:1997— 23 стр.
Classification of environmental conditions; part 3: classification of groups of environmental parameters and their severities; ship environment (IEC 60721-3-6:1987 + A1:1991); German version EN 60721-3-6:1993— 9 стр.
Classification of environmental conditions - Part 3: classification of groups of environmental parameters and their severities; section 6: Ship environment; Amendment A2 (IEC 60721-3-6:1987/A2:1996); German version EN 60721-3-6:1993/A2:1997
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 7: Portable and non-stationary use (IEC 60721-3-7:1995); German version EN 60721-3-7:1995— 26 стр.
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities; section 7: Portable and non-stationary use; Amendment A1 (IEC 60721-3-7:1995/A1:1996); German version EN 60721-3-7:1995/A1:1997
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities; section 9: Microclimates inside products (IEC 60721-3-9:1993); German version EN 60721-3-9:1993— 10 стр.
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities; section 9: Microclimates inside products (IEC 60721-3-9:1993/A1:1994); German version EN 60721-3-9:1993/A1:1995
Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) (IEC 60812:2006); German version EN 60812:2006— 48 стр.
Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:2012); German version EN ISO 7539-1:2012— 27 стр.
Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation (ISO 9223:2012); German version EN ISO 9223:2012— 24 стр.
Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories (ISO 9224:2012); German version EN ISO 9224:2012— 20 стр.
Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012); German version EN ISO 9225:2012— 28 стр.
Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012); German version EN ISO 9226:2012— 10 стр.
Corrosion of metals and alloys - Corrosion tests in artificial atmosphere - Accelerated outdoor test by intermittent spraying of a salt solution (Scab test) (ISO 11474:1998); German version EN ISO 11474:2014— 12 стр.
Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of indoor corrosivity (ISO 11844-1:2006); German version EN ISO 11844-1:2008— 24 стр.
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017); German version EN ISO 11997-1:2017— 26 стр.
Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013); German version EN ISO 11997-2:2013— 18 стр.
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018)
Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015)— 21 стр.
Corrosion of metals and alloys. Corrosion tests in artificial atmospheres. Guidelines for selection of accelerated corrosion test for product qualification— 28 стр.
