Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors; German version EN 12693:2008— 62 стр.
Aerospace series - Steel FE-PA3004 (X10CrNi18-09) - Air melted - Non heat treated - Cold drawn wire - a or D <kleiner => 2,3 mm; German and English version EN 2947:2006— 14 стр.
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria; German version EN 378-1:2008— 66 стр.
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation; German version EN 378-2:2008— 67 стр.
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection; German version EN 378-3:2008— 23 стр.
Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish temperature limit values for hot surfaces (includes Corrigendum AC:1994 and Amendment A1:1999); German version EN 563:1994 + AC:1994 + A1:1999— 18 стр.
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products; German version EN 573-3:2007— 32 стр.
Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification; German version EN 764-5:2002— 12 стр.
Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-3:1996— 20 стр.
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, Class designated; German version EN 1515-3:2005— 8 стр.
Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units (includes amendment A1:2000); German version EN 1653:1997 + A1:2000— 26 стр.
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels; German version EN 10025-2:2004— 37 стр.
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels; German version EN 10025-3:2004— 25 стр.
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels; German version EN 10025-4:2004— 25 стр.
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance; German version EN 10025-5:2004— 27 стр.
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition; German version EN 10025-6:2004— 25 стр.
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties - Corrigendum 1 to English version of DIN EN 10028-2:2003-09— 3 стр.
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes; German version EN 10088-3:2005— 63 стр.
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions; German version EN 10130:2006, Corrigenda to DIN EN 10130:2007-02— 2 стр.
Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures; German version EN 10213-2:1995— 7 стр.
Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures; German version EN 10213-3:1995— 5 стр.
Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic-ferritic steel grades; German version EN 10213-4:1995— 6 стр.
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10216-2:2002+A2:2007— 44 стр.
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10216-3:2002 + A1:2004— 38 стр.
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties; German version EN 10216-4:2002 + A1:2004— 34 стр.
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes; German version EN 10216-5:2004, Corrigendum to DIN EN 10216-5:2004-11; German version EN 10216-5:2004/AC:2008— 2 стр.
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties (including corrigendum AC:2000); German version EN 10222-2:1999 + AC:2000— 17 стр.
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength (includes Amendment A1:2001); German version EN 10222-4:1998 + A1:2001— 7 стр.
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; German version EN 10222-5:1999— 20 стр.
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties; German version EN 10269:1999 + A1:2006, Corrigendum to DIN EN 10269:2006; German version EN 10269:1999/A1:2006/AC:2008— 2 стр.
Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment; German version EN 12392:2000— 26 стр.
Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation; German version EN 13136:2001 + A1:2005— 32 стр.
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron; German version EN 13445-6:2002/A3:2008— 16 стр.
Mechanical properties of fasteners; part 2: nuts with specified proof load values; coarse thread (ISO 898-2:1992); German version EN 20898-2:1993— 16 стр.
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995— 5 стр.
Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units, General requirements and particular requirements for clamping units for conductors from 0,2 mm$u2 up to 35 mm$u2 (included)— 32 стр.
Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units. Particular requirements for clamping units for conductors above 35 mm$u2 up to 300 mm$u2 (included)— 22 стр.
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999— 28 стр.
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998, Corrigenda to DIN EN ISO 898-5:1998-10— 2 стр.
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values; fine pitch thread (ISO 898-6:1994); German version EN ISO 898-6:1995— 10 стр.
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997); German version EN ISO 3506-1:1997— 19 стр.
Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003); German version EN ISO 4126-2:2003— 39 стр.
Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO 12100-1:2003); German version EN ISO 12100-1:2003— 42 стр.
Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003) German version EN ISO 12100-2:2003— 40 стр.
Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003); German version EN ISO 15607:2003— 18 стр.
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004+Amd 1:2008); German version EN ISO 15614-1:2004+A1:2008— 36 стр.
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005); German version EN ISO 15614-2:2005— 38 стр.
