Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 17660:1983-12

Отменен
Wrought copper alloys; copper-zinc alloys; (brass); (special brass); composition — 9 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 1333-2:1972-02
Отменен
Presentation of Numerical Data; Rounding — 2 стр.
DIN 1780:1974-06
Отменен
Strip and Strip Cut to Length for Leaf Springs of Wrought Copper Alloys; Technical Conditions of Delivery — 4 стр.
DIN 17851:1990-11
Отменен
Titanium alloys; chemical composition — 5 стр.
DIN 17670-1:1983-12
Отменен
Wrought copper and copper alloy plate, sheet and strip; properties — 16 стр.
DIN 17670-2:1969-06
Отменен
Plate, Sheet and Strip of Copper and Wrought Copper Alloys; Technical Conditions of Delivery — 2 стр.
DIN 17671-1:1983-12
Отменен
Wrought copper and copper alloy tubes; properties — 8 стр.
DIN 17671-2:1969-06
Отменен
Tubes of Copper and Wrought Copper Alloys; Technical Conditions of Delivery — 2 стр.
DIN 17672-1:1983-12
Отменен
Wrought copper and copper alloy rod and bar; properties — 11 стр.
DIN 17672-2:1974-06
Отменен
Bars of Copper and Wrought Copper Alloys; Technical Conditions of Delivery — 2 стр.
DIN 17673-1:1983-12
Отменен
Wrought copper and copper alloy drop forgings; properties — 4 стр.
DIN 17673-2:1973-12
Отменен
Drop Forgings of Copper and Wrought Copper Alloys; Technical Conditions of Delivery — 3 стр.
DIN 17674-2:1963-06
Отменен
Copper and Wrought Copper Alloy Extruded Sections; Technical Conditions of Delivery — 2 стр.
DIN 17675-1:1980-07
Отменен
Plates of Copper and Wrought Copper Alloys for Condensers and Heat Exchangers; Strength Properties — 4 стр.
DIN 17677-1:1983-12
Отменен
Wrought copper and copper alloy wire; properties — 7 стр.
DIN 17677-2:1974-06
Отменен
Wire of Copper and Wrought Copper Alloys; Technical Conditions of Delivery — 2 стр.
DIN 17678-1:1983-12
Отменен
Wrought copper and copper alloy hand forgings; properties — 3 стр.
DIN 17678-2:1973-11
Отменен
Hand Forgings of Copper and Wrought Copper Alloys; Technical Conditions of Delivery — 2 стр.
DIN 17679:1983-10
Отменен
Wrought copper and copper alloy tubes with rolled fins for use in heat exchangers — 8 стр.
DIN 17682:1979-08
Отменен
Round Spring Wires Made of Wrought Copper Alloys; Strength Properties; Technical Conditions of Delivery — 3 стр.
DIN 50503:1998-05
Отменен
Chemical analysis of copper and copper alloys - Determination of copper in wrought and cast copper alloys — 2 стр.
DIN 50504:1973-10
Действует
Chemical analysis of copper and copper alloys; photometric determination of iron in copper and copper alloys containing 0,4 % of iron at maximum — 2 стр.
DIN 50505:1973-10
Отменен
Chemical analysis for copper and copper alloys; photometric determination of manganese in copper alloys containing 6 % of manganese at maximum — 3 стр.
DIN 50506:1973-10
Действует
Chemical analysis of copper and copper alloys; photometric determination of nickel in copper alloys containing 2,5 % of nickel at maximum — 2 стр.
DIN 50507:1977-07
Действует
Chemical analysis of copper and copper alloys; determination of lead, extracting-titration method — 4 стр.
DIN 50508:1977-06
Действует
Chemical analysis of copper and copper alloys; determination of tin as alloying element, volumetric method — 3 стр.
DIN 50509:1977-05
Отменен
Chemical analysis of copper and copper alloys; determination of the aluminium content of copper alloys, volumetric method — 3 стр.
DIN 50510:1980-04
Действует
Chemical analysis of copper and copper alloys; determination of arsenic in copper and copper alloys, photometric method — 3 стр.
DIN 17660:1974-04
Отменен
Wrought Copper Alloys; Copper-zinc Alloys (Brass), (Special Brass); Composition — 11 стр.

На этот документ ссылаются

DIN 81318:1966-07
Отменен
Handles for sliding-doors for door locks used in shipbuilding — 2 стр.
DIN 80705:1990-08
Отменен
Thin nuts with coarse pitch and fine pitch thread and with small widths across flats — 3 стр.
DIN 81417:1977-05
Отменен
Lashing rings — 1 стр.
DIN 81311:1985-08
Отменен
Rim-locks for heavy hinged doors on ships — 8 стр.
DIN 81249-2:1997-11
Отменен
Corrosion of metals in sea water and sea atmosphere - Part 2: Free corrosion in sea water — 51 стр.
DIN 81312:1987-12
Отменен
Rim-locks without latch-bolt for heavy hinged doors — 7 стр.
DIN 81901:1998-07
Действует
Standard guide roller — 4 стр.
DIN 81319:1973-12
Отменен
Click for trapdoors with mortise-lock — 1 стр.
DIN 82047:1972-02
Отменен
Span Bearing Accessories; Span Trunnions, Bushes, Pins, Washers — 6 стр.
DIN 81902:1998-07
Действует
Roller fairleads — 11 стр.
DIN 64855:1970-03
Отменен
Prism pegs for Jacquard machines — 2 стр.
DIN 44921-1:1985-01
Отменен
Electric cartridge-type heating elements, metal-sheathed; dimensions — 2 стр.
DIN 44921-1:1973-04
Отменен
Electric cartridge-type heating elements, metal sheathed; dimensions — 1 стр.
DIN 46221:1965-03
Действует
Angle sockets, hot pressed, cast for copper conductors — 2 стр.
DIN 44922-2:1985-01
Отменен
Electric immersion heating elements, screw-in type, with cartridge-type heating elements, metal-sheathed; dimensions — 2 стр.
DIN 46274:1973-11
Действует
Sleeve terminals B — 2 стр.
DIN 44879:1981-07
Отменен
Low hexagon nuts for nipples and screw heads for electrical tubular heating elements — 2 стр.
DIN 46220:1965-03
Действует
Cable sockets, hot pressed, cast for copper conductors — 3 стр.
DIN 44921-3:1976-09
Отменен
Electric cartridge-type heating elements, metal sheathed; design and use — 1 стр.
DIN 46294:1980-02
Отменен
Terminal board, square shape with six terminals; rated voltage 660 V, main dimensions — 3 стр.
DIN 44769:1976-09
Отменен
Cooling Tubes with Thread for Electrode Shanks — 1 стр.
DIN 44922-2:1973-05
Отменен
Electric immersion heating elements, screw-in type, with cartridge-type heating elements, metal sheathed; dimensions — 2 стр.
DIN 46281:1976-03
Отменен
Flat terminal connection strips for electrical apparatus in firedamp proof and explosion protected enclosures — 4 стр.
DIN 44922-3:1976-09
Отменен
Electric immersion heating elements; design and use — 1 стр.
DIN 44922-1:1985-01
Отменен
Electric immersion heating elements; screw-in type, G 1 1/2 B thread with metal-sheathed tubular heating elements of 6,5 and 8,5 mm diameter; dimensions and input rating — 2 стр.
DIN 44879:1985-09
Отменен
Flat hexagon nuts for nipples and screw heads for electrical tubular heating elements, metal-sheated — 2 стр.
DIN 44878:1981-07
Отменен
Screw heads for electrical tubular heating elements — 2 стр.
DIN 54811:1984-05
Отменен
Testing of plastics; determining the fluidity of plastics melts by the capillary rheometer — 6 стр.
DIN 86261:1996-04
Отменен
Non return valves for shipboard use, cutt off type, of gun metall, with flanges, DN 15 to 500 — 8 стр.
DIN 86261:1998-10
Отменен
Non return valves for shipboard use, cutt off type, of gun metall, with flanges, DN 15 to 500 — 10 стр.
DIN 86056:1988-05
Отменен
Conduits pipes with sleeve nut and gasket for steel tubes and tubes of copper or copper alloys — 6 стр.
DIN 86251:1998-10
Отменен
Shutt off valves for shipboard use, of cast iron, with flanges, DN 15 to 500 — 12 стр.
DIN 86501:1973-07
Отменен
Gunmetal Screwed-bonnet Type Shut-off Valves with Non-soldered Cutting Ring - Type Pipe Unions — 6 стр.
DIN 86511:1973-07
Отменен
Shut-off valves, screwed-bonnet type of gun metal with 25° taper-bushing pipe unions for brazing — 6 стр.
DIN 86260:1996-04
Отменен
Shutt off valves for shipboard use, of gun metall, with flanges, DN 15 to 500 — 8 стр.
DIN 86251:1996-04
Отменен
Shutt off valves for shipboard use, of cast iron, with flanges, DN 15 to 500 — 8 стр.
DIN 86012:1984-01
Отменен
Pipelines of unplasticized polyvinyl chloride (PVC-U) on ships, with cold-welded joints; requirements, dimensions for bonding, summary of components — 10 стр.
DIN 86512:1973-07
Отменен
Shut-off check valves, screwed-bonnet type of gun metal with 25° taper-bushing pipe unions for brazing — 6 стр.
DIN 86502:1973-07
Отменен
Gunmetal Screwed bonnet Non-return Valves with Non-soldered Pipe Unions with Cutting Ring — 6 стр.
DIN 86252:1998-10
Отменен
Non return valves for shipboard use, cutt off type, of cast iron, with flanges, DN 15 to 500 — 12 стр.
DIN 87602:1965-04
Отменен
Speaking tube lines; mouth pieces — 2 стр.
DIN 86012:1978-06
Отменен
Pipe lines of unplasticized polyvinyl chloride (unplasticized PVC) ships, cemented type joints; summary of components — 8 стр.
DIN 86252:1996-04
Отменен
Non return valves for shipboard use, cutt off type, of cast iron, with flanges, DN 15 to 500 — 8 стр.
DIN 86260:1998-10
Отменен
Shutt off valves for shipboard use, of gun metall, with flanges, DN 15 to 500 — 10 стр.
DIN 58545:1996-11
Отменен
Pencil points or divider points for standard drawing instruments (S) — 2 стр.
DIN 58512:1976-01
Отменен
Divider points for precision drawing instruments (P) — 1 стр.
DIN 58520-1:1994-07
Отменен
Screws for drawing instruments; part 1: T-bolts — 2 стр.
DIN 58529:1971-03
Отменен
Center tacks, horn centres for drawing instruments — 1 стр.
DIN 58531:1984-07
Отменен
Clamping screws for drawing instruments — 1 стр.
DIN 58542:1977-01
Отменен
Reversible spring bow for school drawing instruments — 1 стр.
DIN 58506:1976-01
Отменен
Dividers for precision drawing instruments (P) — 1 стр.
DIN 58556:1987-06
Отменен
Quick setting bow pencil and quick setting bow combination with interchangeable parts — 3 стр.
DIN 58510:1994-07
Отменен
Pencil points for precision drawing instruments (P) — 2 стр.
DIN 58544:1974-08
Отменен
Fixed centre spring bow with interchangeable points for school drawing instruments — 2 стр.
DIN 58553:1979-03
Отменен
Needle holders for drawing instruments — 3 стр.
DIN 58507:1976-01
Отменен
Spring bow compass with interchangeable points for precision drawing instruments (P) — 2 стр.
DIN 58521:1978-10
Отменен
Knurled nuts for drawing instruments — 2 стр.
DIN 58508:1976-01
Отменен
Spring bow divider for precision drawing instruments (P) — 2 стр.
DIN 58541:1996-11
Отменен
Dividers for school drawing standard drawing instruments — 2 стр.
DIN 58513:1994-07
Отменен
Lengthening bar for precision drawing instruments (P) — 2 стр.
DIN 58508:1994-07
Отменен
Spring-bow divider for precision drawing instruments (P) — 2 стр.
DIN 58543:1987-04
Отменен
Spring bow divider for school drawing instruments — 2 стр.
DIN 58505:1987-06
Отменен
Compass with interchangeable points for precision drawing instruments (P) — 2 стр.
DIN 58543:1977-06
Отменен
Spring bow divider for school drawing instruments — 2 стр.
DIN 58506:1994-01
Отменен
Dividers for precision drawing instruments (P) — 2 стр.
DIN 58544:1987-04
Отменен
Fixed centre bow with interchangeable points for school drawing instruments — 2 стр.
DIN 58540:1996-11
Отменен
Compass with interchangeable points for standard drawing instruments — 2 стр.
DIN 58505:1976-01
Отменен
Compass (half set) with interchangeable points for precision drawing instruments (P) — 2 стр.
DIN 58540:1987-04
Отменен
Compass with interchangeable points for school drawing instruments — 2 стр.
DIN 58521:1994-07
Отменен
Knurled nuts for drawing instruments — 2 стр.
DIN 58554:1977-11
Отменен
Indian ink writing and drawing instruments; adapters for compasses for ink writing pens for precision drawing instruments (P) — 3 стр.
DIN 58553:1996-11
Отменен
Needle holders for drawing instruments — 3 стр.
DIN 58952-1:1977-01
Отменен
Sterilization; packing materials for sterilizing goods, rectangular sterilizing containers made of metal — 2 стр.
DIN 58513:1976-02
Отменен
Lengthening bar for precision drawing instruments (P) — 1 стр.
DIN 58542:1987-04
Отменен
Reversible spring bow for school drawing instruments — 2 стр.
DIN 58510:1976-01
Отменен
Pencil points for precision drawing instruments (P) — 1 стр.
DIN 58541:1987-04
Отменен
Dividers for school drawing instruments — 2 стр.
DIN 58509:1994-07
Отменен
Fixed centre spring bow with interchangeable points for precision drawing instruments (P) — 2 стр.
DIN 58532:1995-04
Отменен
Drawing instruments - Lengthening bar for big bow combination with interchangeable parts — 2 стр.
DIN 58544:1996-11
Отменен
Drop bow for standard drawing instruments — 2 стр.
DIN 58548:1996-11
Отменен
Lengthening bar for standard drawing instruments — 2 стр.
DIN 58542:1996-11
Отменен
Reversible spring bow for standard drawing instruments — 2 стр.
DIN 58505:1994-03
Отменен
Compass with interchangeable points for precision drawing instruments (P) — 2 стр.
DIN 58509:1976-01
Отменен
Fixed centre spring bow with interchangeable points for precision drawing instruments (P) — 2 стр.
DIN 58512:1994-07
Отменен
Divider points for precision drawing instruments (P) — 2 стр.
DIN 58506:1987-06
Отменен
Dividers for precision drawing instruments (P) — 2 стр.
DIN 58507:1994-03
Отменен
Spring bow compass with interchangeable points for precision drawing instruments (P) — 2 стр.
DIN 58555:1977-06
Отменен
Points for ball point pen refills for school drawing instruments (S) — 1 стр.
DIN 42562:1966-01
Отменен
Silica-Gel Breathers for Transformers — 4 стр.
DIN 42562-2:1987-04
Отменен
Transformers; silica gel breathers with fillings of 1,2 to 4,8 kg; components — 9 стр.
DIN 41097-4:1968-08
Отменен
Steel-tube support for electrical sirens 125 to 500 V<ähnlich>; skylight — 11 стр.
DIN 43162:1964-01
Отменен
Turnbuckles for overhead equipment — 1 стр.
DIN 43080:1968-04
Отменен
Intermediate metal sheets for carbon-brush-holders — 1 стр.
DIN 43772:2000-03
Действует
Control technology - Protective tubes and extension tubes for liquid-in-glass thermometers, dial thermometers, thermocouples and resistance thermometers - Dimensions, materials, testing — 23 стр.
DIN 43579-3:1984-06
Действует
Lead-acid storage batteries; train lighting batteries; connecting terminals — 2 стр.
DIN 41496:1986-08
Отменен
Electrical communications engineering; solder bags, solder lugs, solder pins — 6 стр.
DIN 41496:1987-05
Отменен
Electrical communications engineering; solder bags, solder lugs, solder pins — 6 стр.
DIN 42560:1971-12
Отменен
Transformers; Throttle-valves NW 80, Dimensions, Tightness Testing — 3 стр.
DIN 42556-1:1975-01
Отменен
Oil-to-water Heat Exchanger for Transformers, Vertical Arrangement — 5 стр.
DIN 17672-1:1974-06
Отменен
Bars of Copper and Wrought Copper Alloys; Strength Properties — 11 стр.