Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 4000-89:2012-03

Действует
Tabular layouts of properties - Part 89: Adaptive items for tools and extenders — 71 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 10:2009-12
Действует
Squares of parallel shanks for rotating tools — 7 стр.
DIN 1808:1964-06
Отменен
Adaptor Sockets for Cotter Retention — 2 стр.
DIN 6388:1993-02
Отменен
Collets for tool holder with taper ratio 1 : 10; collets, holder, nuts — 8 стр.
DIN 6391:1990-02
Действует
Chucks with taper shank 7/24 for collets for tool holder with taper 1:10 — 2 стр.
DIN 6499:2002-04
Отменен
Collets with 8° setting angle for tool shanks - Collets, nuts and fitting dimensions — 8 стр.
DIN 6535:1992-02
Действует
Parallel shanks for hardmetal twist drills and end mills; dimensions — 4 стр.
DIN 6595:1993-11
Действует
Drills with indexable inserts; parallel shanks — 2 стр.
DIN 8025-1:2004-07
Действует
Tool holders for internal turning with cylindrical shank, for indexable inserts - Part 1: Shapes, dimensions, calculation for corrections — 11 стр.
DIN 8025-2:1986-04
Отменен
Tool holders for internal turning, with cylindrical shank, for indexable inserts; style F — 5 стр.
DIN 8025-3:1986-04
Отменен
Tool holders for internal turning, with cylindrical shank, for indexable inserts; style K — 4 стр.
DIN 8025-4:2004-07
Действует
Tool holders for internal turning, with cylindrical shank, for indexable inserts - Part 4: Style L — 10 стр.
DIN 8025-5:2004-07
Действует
Tool holders for internal turning, with cylindrical shank, for indexable inserts - Part 5: Style U — 10 стр.
DIN 1809:1961-07
Отменен
Driving Tenons for Tools with Parallel Shank — 1 стр.
DIN 8025-6:2004-07
Действует
Tool holders for internal turning, with cylindrical shank, for indexable inserts - Part 6: Style Q — 10 стр.
DIN 55058:1978-09
Действует
Spindle Noses for Adjustable Adapters; Connecting Dimensions — 2 стр.
DIN 69063-1:2008-08
Действует
Machine tools - Tool receiver for hollow taper shanks - Part 1: For Type A and Type C according to DIN 69893, connecting dimensions — 10 стр.
DIN 69063-2:2003-05
Действует
Machine tools - Tool receiver for hollow taper shanks - Part 2: For type B and type D according to DIN 69893; Connecting dimensions — 9 стр.
DIN 69063-5:2006-11
Отменен
Machine tools - Tool receiver for hollow taper shanks - Part 5: For type E according to DIN 69893-5; connecting dimensions — 8 стр.
DIN 69063-5:2011-07
Отменен
Machine tools - Tool receiver for hollow taper shanks - Part 5: For type E according to DIN 69893-5; Connecting dimensions
DIN 69063-6:2003-05
Действует
Machine tools - Tool receiver for hollow taper shanks - Part 6: For type F according to DIN 69893; Connecting dimensions — 6 стр.
DIN 69063-7:2011-04
Отменен
Machine tools - Tool receiver for hollow taper shanks - Part 7: For stationary tools Type T according to DIN 69893; Connecting dimensions
DIN 69871-1:1995-10
Отменен
Tool shanks with 7/24 taper for automatic tool exchange - Part 1: Type A, type AD, type B and with data media — 5 стр.
DIN 69880-10:1997-04
Действует
Tool holders with parallel shank - Part 10: Type AK; axially coupleable drive — 2 стр.
DIN 18095-3:2009-05
Отменен
Smoke control shutters - Part 3: Application of test results
DIN 69880-11:1994-09
Действует
Tool holders with parallel shank - Part 11: Support for angular adjustment — 3 стр.
DIN 69881-1:1987-09
Действует
Tool holders with prism; prism, prism location; technical delivery conditions — 3 стр.
DIN 69881-2:1989-04
Действует
Tool holder with prism; form A with square transverse seat — 2 стр.
DIN 69881-3:1989-04
Действует
Tool holder with prism; form B square longitudinal seat — 2 стр.
DIN 69881-4:1989-04
Действует
Tool holder with prism; form C with more than one square seats — 3 стр.
DIN 69881-5:1989-04
Действует
Tool holder with prism; form D with cylindrical seat — 2 стр.
DIN 69882-1:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 1: Designation system, technical delivery conditions — 5 стр.
DIN 69882-2:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 2: Type A, milling cutters with tenon and parallel key drive - Dimensions — 7 стр.
DIN 69882-3:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 3: Type B, milling machine arbors with enlarged contact surface diameter for milling cutters with parallel key drive - Dimensions — 6 стр.
DIN 69882-4:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 4: Type C, holding fixture for parallel shanks with lateral driving surface - Dimensions — 7 стр.
DIN 1835-1:1999-01
Действует
Parallel shanks for milling cutters - Part 1: Dimensions — 6 стр.
DIN 69882-5:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 5: Type D, holders for parallel shanks with inclined clamping surface - Dimensions — 8 стр.
DIN 69882-6:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 6: Type E, clamping chuck for collets with 8° setting angle - Dimensions — 7 стр.
DIN 69882-7:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 7: Type F, expansion clamping chuck - Dimensions — 12 стр.
DIN 69882-8:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 8: Type G, shrink chuck - Dimensions — 10 стр.
DIN 69888:2008-09
Действует
Requirements for balancing of rotating tool systems — 37 стр.
DIN 69893-1:2011-04
Действует
Hollow taper shanks with flange contact surface - Part 1: Hollow taper shanks type A and type C; Dimensions and design — 16 стр.
DIN 69893-2:2011-04
Действует
Hollow taper shanks with flange contact surface - Part 2: Hollow taper shank type B; Dimensions and design — 12 стр.
DIN 69893-5:2006-11
Отменен
Hollow taper shanks with flat contact surface - Part 5: Hollow taper shanks type E; Dimensions — 11 стр.
DIN 69893-6:2003-05
Действует
Hollow taper shanks with flange contact surface - Part 6: Hollow taper shanks type F; Dimensions and design — 8 стр.
DIN EN ISO 286-1:2010-11
Отменен
Geometrical product specification (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010) — 49 стр.
DIN 1835-2:2000-11
Действует
Parallel shanks for milling cutters - Part 2: Connecting dimensions for holder chucks, accessories — 6 стр.
DIN EN ISO 286-2:2010-11
Отменен
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010) — 59 стр.
DIN ISO 239:2003-12
Действует
Drill chuck tapers (ISO 239:1999) — 6 стр.
DIN ISO 965-1:1999-11
Отменен
ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data (ISO 965-1:1998) — 20 стр.
DIN ISO 10887:2003-12
Действует
Key type three-jaw drill chucks - Specification (ISO 10887:1999) — 13 стр.
BS ISO 12164-4:2008
Заменен
Hollow taper interface with flange contact surface. Dimensions of receivers for stationary tools — 16 стр.
DIN ISO 10888:2003-12
Действует
Keyless type three-jaw drill chucks - Specification (ISO 10888:1999) — 14 стр.
DIN ISO 10889-1:2006-01
Действует
Tool holders with cylindrical shank - Part 1: Cylindrical shank, location bore; Technical delivery conditions (ISO 10889-1:2004) — 11 стр.
DIN ISO 10889-2:2006-01
Отменен
Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs (ISO 10889-2:2004) — 6 стр.
DIN ISO 10889-3:2006-01
Отменен
Tool holders with cylindrical shank - Part 3: Type B with rectangular radial seat (ISO 10889-3:2004) — 12 стр.
DIN ISO 10889-4:2006-01
Отменен
Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat (ISO 10889-4:2004) — 10 стр.
DIN ISO 10889-5:2006-01
Отменен
Tool holders with cylindrical shank - Part 5: Type D with more than one rectangular seat (ISO 10889-5:1997) — 6 стр.
DIN 2079:1987-08
Действует
7/24 tapers for spindle noses for machine tools — 8 стр.
DIN ISO 10889-6:2006-01
Отменен
Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat (ISO 10889-6:2004) — 12 стр.
DIN ISO 10889-7:2006-01
Отменен
Tool holders with cylindrical shank - Part 7: Type F with taper seat (ISO 10889-7:2004) — 7 стр.
DIN ISO 10889-8:2006-01
Действует
Tool holders with cylindrical shank - Part 8: Type Z, accessories (ISO 10889-8:1997) — 9 стр.
DIN ISO 10897:2006-01
Отменен
Collets for tool holders with taper ratio 1:10 - Collets, holders, nuts (ISO 10897:1996) — 14 стр.
DIN ISO 15488:2006-01
Действует
Collets with 8° setting angle for tool shanks - Collets, nuts and fitting dimensions (ISO 15488:2003) — 13 стр.
DIN EN ISO 23811:2009-08
Отменен
Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009); German version EN ISO 23811:2009 — 18 стр.
BS ISO 12164-1:2001
Действует
Hollow taper interface with flange contact surface. Shanks. Dimensions — 20 стр.
BS ISO 12164-2:2001
Действует
Hollow taper interface with flange contact surface. Receivers. Dimensions — 14 стр.
BS ISO 12164-3:2008
Заменен
Hollow taper interface with flange contact surface. Dimensions of shanks for stationary tools — 20 стр.
DIN 2080-2:2011-11
Действует
7/24 taper shanks for tools and clamping devices - Part 2: Form B — 6 стр.
BS ISO 13399-1:2006
Действует
Cutting tool data representation and exchange. Overview, fundamental principles and general information model — 454 стр.
BS ISO/TS 13399-2:2005
Действует
Cutting tool data representation and exchange. Reference dictionary for the cutting items — 108 стр.
DD ISO/TS 13399-3:2007
Действует
Cutting tool data representation and exchange. Reference dictionary for tool items — 172 стр.
DD ISO/TS 13399-4:2007
Действует
Cutting tool data representation and exchange. Reference dictionary for adaptive items — 72 стр.
DD ISO/TS 13399-50:2007
Действует
Cutting tool data representation and exchange. Reference dictionary for reference systems and common concepts — 102 стр.
DD ISO/TS 13399-60:2007
Действует
Cutting tool data representation and exchange. Reference dictionary for connection systems — 134 стр.
DD ISO/TS 13399-100:2008
Действует
Cutting tool data representation and exchange. Definitions, principles and methods for reference dictionaries — 66 стр.
DD ISO/TS 13399-150:2008
Действует
Cutting tool data representation and exchange. Usage guidelines — 98 стр.
DIN ISO 26622-1:2010-11
Отменен
Modular taper interface with ball track system - Part 1: Dimensions and designation of shanks (ISO 26622-1:2008)
DIN 2080-1:2011-11
Действует
7/24 taper shanks for tools and clamping devices - Part 1: Type A — 8 стр.
DIN ISO 26622-2:2010-11
Отменен
Modular taper interface with ball track system - Part 2: Dimensions and designation of receivers (ISO 26622-2:2008)
DIN ISO 26623-1:2010-11
Отменен
Polygonal taper interface with flange contact surface - Part 1: Dimensions and designation of shanks (ISO 26623-1:2008)
DIN ISO 26623-2:2010-11
Отменен
Polygonal taper interface with flange contact surface - Part 2: Dimensions and designation of receivers (ISO 26623-2:2008)
DIN 2086-2:1964-07
Отменен
Hob Arbors for Hobs with Longitudinal Keyway — 2 стр.
DIN 2086-3:1964-07
Отменен
Hob arbors for hobs with clutch drive — 2 стр.
DIN 138:2003-04
Действует
Metal-cutting tools - Bores, keyways and driving features for tools with parallel bore and 1 in 30 taper bore — 12 стр.
DIN 2185:1960-11
Отменен
Taper Sleeves for Tools with Morse Taper — 2 стр.
DIN 4000-1:2011-03
Отменен
Tabular layouts of properties - Part 1: Concepts and principles
DIN 4000-76:2009-11
Отменен
Tabular layouts of properties - Part 76: Inserts, indexable — 20 стр.
DIN 4000-77:2011-12
Действует
Tabular layouts of properties - Part 77: Inserts, clamped, for grooving, parting and thread machining — 25 стр.
DIN 4000-78:2011-08
Действует
Tabular layouts of properties - Part 78: Tips, brazed — 14 стр.
DIN 4000-80:2011-08
Отменен
Tabular layouts of properties - Part 80: Screwing taps, cold forming taps and screwing dies — 19 стр.
DIN 4000-81:2011-08
Отменен
Tabular layouts of properties - Part 81: Drills and countersinking tools with non-indexable cutting edges
DIN 4000-82:2011-08
Отменен
Tabular layouts of properties - Part 82: End mills with non-indexable cutting edges — 30 стр.
DIN 4000-83:2011-05
Отменен
Tabular layouts of properties - Part 83: Milling cutter with arbor hole and non-indexable cutting edges — 25 стр.
DIN 4000-84:2012-02
Действует
Tabular layouts of properties - Part 84: Modular tooling systems with adjustable cartridges for boring — 33 стр.
DIN 202:1999-11
Действует
Screw threads - General plan — 8 стр.
DIN 4000-86:2011-03
Отменен
Tabular layouts of properties - Part 86: Drills and counter sinking tools for indexable inserts — 26 стр.
DIN 4000-87:2011-12
Отменен
Tabular layouts of properties - Part 87: End mills for indexable inserts — 26 стр.
DIN 4000-88:2011-12
Отменен
Tabular layouts of properties - Part 88: Milling cutter with arbor hole for indexable inserts — 23 стр.
DIN 4000-90:2011-12
Отменен
Tabular layouts of properties - Part 90: Tool holders for indexable inserts — 30 стр.
DIN 4000-93:2011-04
Отменен
Tabular layouts of properties - Part 93: Collets, clamping sleeves, ferrules, expanding sleeves and chuck heads
DIN 4000-94:2012-01
Действует
Tabular layouts of properties - Part 94: Quick change adaptors
DIN 4000-95:2007-11
Отменен
Tabular layouts of properties - Part 95: Interface coding for tools and clamping devices — 37 стр.
DIN 4000-98:2012-01
Действует
Tabular layouts of properties - Part 98: Lathe tools with non-indexable cutting edges
DIN 4000-126:2009-09
Отменен
Tabular layouts of properties - Parti 126: Reamers with non-indexable cutting edges
DIN 217:1972-09
Отменен
Arbors with Morse Taper for Shell Reamers and Shell Drills — 2 стр.
DIN 4000-127:2011-04
Действует
Tabular layouts of properties - Part 127: Reamers for replaceable inserts — 23 стр.
DIN 4000-171:2009-09
Отменен
Tabular layouts of properties - Part 171: Replaceable inserts for drilling
DIN 4000-172:2010-01
Отменен
Tabular layouts of properties - Part 172: Driven tool units
DIN 4000-173:2010-01
Отменен
Tabular layouts of properties - Part 173: Machine operated feed out tools
DIN 4002-3:2006-03
Отменен
Properties and their scopes for product data exchange - Part 3: Textual and information technological definition of the attributes for entities
DIN 4003-1:2011-03
Отменен
Concept for the design of 3D models based on properties according to DIN 4000 - Part 1: Overview and fundamental principles — 15 стр.
DIN 4003-76:2011-12
Отменен
Concept for the design of 3D models based on properties according to DIN 4000 - Part 76: Inserts, indexable — 51 стр.
DIN 4003-80:2011-10
Отменен
Concept for the design of 3D models based on properties according to DIN 4000 - Part 80: Screwing tabs, cold forming taps and screwing dies — 29 стр.
DIN 4003-81:2011-03
Отменен
Concept for the design of 3D models based on properties according to DIN 4000 - Part 81: Drills and counter sinking tools with non-indexable cutting edges — 50 стр.
DIN 4003-86:2011-03
Отменен
Concept for the design of 3D models based on properties according to DIN 4000 - Part 86: Drills and counter sinking tools for indexable inserts — 90 стр.
DIN 228-1:1987-05
Действует
Morse tapers and metric tapers; taper shanks — 6 стр.
DIN 4984-1:2004-07
Отменен
Tool holders with rectangular shank for indexable inserts - Part 1: General survey, correlation and designation of dimensions — 16 стр.
DIN 4984-2:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style A — 6 стр.
DIN 4984-3:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style B — 6 стр.
DIN 4984-4:2004-07
Отменен
Tool holders with rectangular shank for indexable inserts - Part 4: Style D — 10 стр.
DIN 4984-5:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style F — 6 стр.
DIN 4984-6:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style G — 6 стр.
DIN 4984-7:2004-07
Отменен
Tool holders with rectangular shank for indexable inserts - Part 7: Style J — 11 стр.
DIN 4984-8:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style K — 6 стр.
DIN 4984-9:2004-07
Отменен
Tool holders with rectangular shank for indexable inserts - Part 9: Style L — 9 стр.
DIN 4984-10:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style N — 6 стр.
DIN 228-2:1987-03
Действует
Morse tapers and metric tapers; taper sockets — 5 стр.
DIN 4984-11:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style R — 5 стр.
DIN 4984-12:2004-07
Отменен
Tool holders with rectangular shank for indexable inserts - Part 12: Style S — 12 стр.
DIN 4984-13:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style T — 4 стр.
DIN 4984-14:2004-07
Отменен
Tool holders with rectangular shank for indexable inserts - Part 14: Style H — 9 стр.
DIN 4984-15:2004-07
Отменен
Tool holders with rectangular shank for indexable inserts - Part 15: Style V — 6 стр.
DIN 4985-1:2004-07
Отменен
Cartridges type A for indexable inserts - Part 1: General survey, correlation and designation of dimensions — 18 стр.
DIN 4985-2:1997-08
Отменен
Cartridges type A for indexable inserts - Part 2: Style F — 5 стр.
DIN 4985-3:1997-08
Отменен
Cartridges type A for indexable inserts - Part 3: Style G — 5 стр.
DIN 4985-4:1997-08
Отменен
Cartridges type A for indexable inserts - Part 4: Style J — 5 стр.
DIN 4985-5:1997-08
Отменен
Cartridges type A for indexable inserts - Part 5: Style K — 5 стр.
DIN 238:2005-02
Действует
Drill chuck mounting arrangements - Taper arbors — 6 стр.
DIN 4985-6:1997-08
Отменен
Cartridges type A for indexable inserts - Part 6: Style L — 4 стр.
DIN 4985-7:1997-08
Отменен
Cartridges type A for indexable inserts - Part 7: Style R — 5 стр.
DIN 4985-8:1997-08
Отменен
Cartridges type A for indexable inserts - Part 8: Style S — 5 стр.
DIN 4985-9:1997-08
Отменен
Cartridges type A for indexable inserts - Part 9: Style T — 5 стр.
DIN 4985-10:1997-08
Отменен
Cartridges type A for indexable inserts - Part 10: Style U — 4 стр.
DIN 4985-11:1997-08
Отменен
Cartridges type A for indexable inserts - Part 11: Style W — 5 стр.
DIN 4985-12:1997-08
Отменен
Cartridges type A for indexable inserts - Part 12: Style Y — 5 стр.
DIN 6327-1:1985-06
Действует
Adjustable adaptors for tools with morse taper shanks, short types — 4 стр.
DIN 6327-2:1985-06
Действует
Adjustable adaptors for tools with morse taper shanks, long types — 4 стр.
DIN 6327-3:1985-06
Действует
Adjustable adaptors for tools with morse taper shanks, stepped types — 4 стр.
DIN 254:2003-04
Действует
Geometrical product specifications (GPS) - Series of conical tapers and taper angles; Values for setting taper angles and setting heights — 9 стр.
DIN 6327-4:1981-08
Действует
Adjustable adaptors for tools with morse taper shanks; adjustment nuts for adaptors — 3 стр.
DIN 6341-1:1993-02
Действует
Draw-in collets; collets, holding fixture — 4 стр.
DIN 6341-2:1993-10
Действует
Draw-in collets; thread of the collets; nominal size, limit deviations — 5 стр.
DIN 6343:1993-02
Действует
Collets-dead length type — 5 стр.
DIN 6345:1995-11
Действует
Holding fixtures for collets dead length type with clamping lamellas for the clamping of tools — 4 стр.
DIN 6349:2005-02
Действует
Three-jaw drill chucks - Technical delivery conditions — 9 стр.
DIN 6354:1980-04
Действует
Milling machine arbors with steep taper, complete — 2 стр.
DIN 6355:1980-01
Действует
Clamping Devices; Milling Machine Arbors with Taper — 3 стр.
DIN 6356:1972-05
Отменен
Centering arbors for milling cutters — 2 стр.
DIN 377:2000-05
Действует
Extensions for tools with driving square according to DIN 10 — 3 стр.
DIN 6357:1988-07
Действует
Holding arbors with taper shank 7/24 for milling cutters and face milling cutters with internal alignment — 3 стр.
DIN 6358:1988-07
Действует
Milling machine arbors with taper shank 7/24 for milling cutter with longitudinal or transverse drive — 4 стр.
DIN 6359-1:1996-12
Действует
Reduction sleeves with 7/24 taper shank for parallel shanks with lateral driving surface and inclined clamping surface - Part 1: Type A with 7/24 taper shank in accordance with DIN 2080-1 — 4 стр.
DIN 6359-2:1996-12
Действует
Reduction sleeves with 7/24 taper shank for parallel shanks with lateral driving surface and inclined clamping surface - Part 2: Type B with 7/24 taper shank in accordance with DIN 69871-1 — 4 стр.
DIN 6360:1983-05
Действует
Milling machine arbors with 7/24 taper for milling cutters with longitudinal and transverse drive — 3 стр.
DIN 6364:2000-12
Действует
Reduction sleeves with external taper shank 7/24 for morse taper shank with tightening thread — 5 стр.
DIN 6382:1964-04
Отменен
Tool Extension Sockets — 2 стр.
DIN 6383:1979-04
Отменен
Reduction sleeves with sleep taper, for morse taper shank with flat tang
DIN 6384:1980-03
Отменен
Boring heads with taper 7/24 — 2 стр.
DIN 6385:1980-03
Действует
Short boring bars with taper 7/24 — 2 стр.
DIN 4000-45:1998-04
Отменен
Tabular layout of article characteristics - Part 45: Adaptors and holders for tools — 12 стр.
DIN 4000-72:1998-04
Отменен
Tabular layout of article characteristics - Part 72: Adaptors with cylindrical fixtures for tools — 3 стр.
DIN 4000-73:1998-04
Отменен
Tabular layout of article characteristics - Part 73: Adaptors with tapered fixtures for tools — 3 стр.
DIN 4000-89:1998-04
Отменен
Tabular layout of article characteristics - Part 89: Rotating tool adaptors — 5 стр.
DIN 4000-89:2011-02
Отменен
Tabular layouts of properties - Part 89: Adaptive items for tools and extenders
DIN 4000-91:1998-04
Отменен
Tabular layout of article characteristics - Part 91: Intermediates — 3 стр.
DIN 4000-92:1998-04
Отменен
Tabular layout of article characteristics - Part 92: Non-rotating tool adaptors — 6 стр.
DIN 4000-97:1998-04
Отменен
Tabular layout of article characteristics - Part 97: Tool holders with n numbers of edge fixture of tools — 2 стр.

На этот документ ссылаются

DIN 4000-175:2015-06
Действует
Tabular layouts of properties - Part 175: Cassettes, nests and cartridges for indexable inserts — 32 стр.
DIN 4003-126:2012-10
Действует
Concept for the design of 3D models based on properties according to DIN 4000 - Part 126: Reamers with non-indexable cutting edges — 39 стр.
DIN 4003-77:2013-02
Действует
Concept for the design of 3D models based on properties according to DIN 4000 - Part 77: Inserts, clamped, for grooving, parting and thread machining — 62 стр.
DIN 4000-89:1998-04
Отменен
Tabular layout of article characteristics - Part 89: Rotating tool adaptors — 5 стр.
DIN 4000-170:2014-09
Действует
Tabular layouts of properties - Part 170: Files and rasps with geometrically determined cutting edges — 26 стр.
DIN 4000-172:2012-12
Действует
Tabular layouts of properties - Part 172: Driven tool units — 36 стр.
DIN 4000-92:1998-04
Отменен
Tabular layout of article characteristics - Part 92: Non-rotating tool adaptors — 6 стр.
DIN 4000-73:1998-04
Отменен
Tabular layout of article characteristics - Part 73: Adaptors with tapered fixtures for tools — 3 стр.
DIN 4000-174:2014-02
Действует
Tabular layouts of properties - Part 174: Inserts for reaming — 13 стр.
DIN 4000-93:2013-08
Действует
Tabular layouts of properties - Part 93: Collets, clamping sleeves, ferrules, expanding sleeves and chuck heads — 26 стр.
DIN 4003-172:2013-12
Действует
Concept for the design of 3D models based on properties according to DIN 4000 - Part 172: Driven tool units — 56 стр.
DIN 4000-173:2013-12
Действует
Tabular layouts of properties - Part 173: Machine operated feed out tools and assembly parts — 40 стр.
DIN 4000-72:1998-04
Отменен
Tabular layout of article characteristics - Part 72: Adaptors with cylindrical fixtures for tools — 3 стр.
DIN 4000-126:2012-09
Действует
Tabular layouts of properties - Part 126: Reamers with non-indexable cutting edges — 23 стр.
DIN 4000-91:1998-04
Отменен
Tabular layout of article characteristics - Part 91: Intermediates — 3 стр.
DIN 4003-89:2013-12
Действует
Concept for the design of 3D models based on properties according to DIN 4000 - Part 89: Adaptive items for tools and extenders — 48 стр.
DIN 4003-173:2013-12
Действует
Concept for the design of 3D models based on properties according to DIN 4000 - Part 173: Machine operated feed out tools and assembly parts — 60 стр.
DIN 4003-127:2013-10
Действует
Concept for the design of 3D models based on properties according to DIN 4000 - Part 127: Reamers for replaceable inserts — 56 стр.
DIN 4000-97:1998-04
Отменен
Tabular layout of article characteristics - Part 97: Tool holders with n numbers of edge fixture of tools — 2 стр.
DIN 4003-84:2012-10
Действует
Concept for the design of 3D models based on properties according to DIN 4000 - Part 84: Modular tooling systems with adjustable cartridges for boring — 83 стр.
DIN 4003-174:2014-02
Действует
Concept for the design of 3D models based on properties according to DIN 4000 - Part 174: Inserts for reaming — 20 стр.
DIN 4000-143:2016-09
Действует
Tabular layouts of properties - Part 143: Pinion type cutters with bore or shank — 28 стр.
DIN 4003-175:2016-12
Действует
Concept for the design of 3D models based on properties according to DIN 4000 - Part 175: Cassettes, nests and cartridges for indexable inserts — 100 стр.
DIN 4000-95:2013-11
Отменен
Tabular layouts of properties - Part 95: Interface coding for tools and clamping devices — 74 стр.
DIN 4000-179:2016-12
Действует
Tabular layouts of properties - Part 179: Deburring tools — 20 стр.
DIN 4000-141:2016-10
Действует
Tabular layouts of properties - Part 141: Hobs with bore or shank for cylindrical gears — 40 стр.
DIN 4000-95:2016-12
Действует
Tabular layouts of properties - Part 95: Interface coding for tools and clamping devices — 90 стр.
DIN 4000-178:2016-12
Действует
Tabular layouts of properties - Part 178: Probing systems, stylus systems and styli — 59 стр.
DIN 4000-102:2013-12
Отменен
Tabular layouts of properties - Part 102: Data exchange for tabular layouts of properties with XML schema — 22 стр.
DIN 4000-145:2017-05
Действует
Tabular layouts of properties - Part 145: Broaching tools for cylindrical gears — 39 стр.
DIN 4000-81:2012-08
Отменен
Tabular layouts of properties - Part 81: Drills and countersinking tools with non-indexable cutting edges — 31 стр.
DIN 4003-180:2017-11
Действует
Concept for the design of 3D models based on properties according to DIN 4000 - Part 180: Tool assemblies — 33 стр.
DIN 4000-180:2017-05
Отменен
Tabular layouts of properties - Part 180: Tool assemblies — 45 стр.
DIN 4003-180:2017-05
Отменен
Concept for the design of 3D models based on properties according to DIN 4000 - Part 180: Tool assemblies — 33 стр.
DIN 4000-180:2017-11
Действует
Tabular layouts of properties - Part 180: Tool assemblies — 45 стр.
DIN 4000-86:2017-11
Действует
Tabular layouts of properties - Part 86: Drills and counter sinking tools for indexable inserts — 33 стр.
DIN SPEC 69874-2:2014-11
Отменен
Graphical data layout - Creation of documents for the standardized data exchange - Part 2: Layer settings for tool design — 54 стр.
DIN SPEC 69874-1:2014-11
Отменен
Graphical data layout - Creation of documents for the standardized data exchange - Part 1: Graphical product information — 12 стр.
DIN SPEC 69874-3:2014-11
Отменен
Graphical data layout - Creation of documents for the standardized data exchange - Part 3: Definition of properties for drawing headers and their XML-data exchange — 32 стр.
DIN 4003-90:2018-12
Действует
Concept for the design of 3D models based on properties according to DIN 4000 - Part 90: Tool holders for indexable inserts — 113 стр.
DIN 4003-90:2018-01
Отменен
Concept for the design of 3D models based on properties according to DIN 4000 - Part 90: Tool holders for indexable inserts — 113 стр.
DIN 4000-1:2019-03
Действует
Tabular layouts of properties - Part 1: Concepts and principles — 24 стр.
DIN 4003-80:2019-03
Действует
Concept for the design of 3D models based on properties according to DIN 4000 - Part 80: Screwing tabs, cold forming taps and screwing dies — 31 стр.
DIN 4000-1:2012-09
Отменен
Tabular layouts of properties - Part 1: Concepts and principles — 40 стр.
DIN 4003-82:2013-08
Отменен
Concept for the design of 3D models based on properties according to DIN 4000 - Part 82: End mills with non-indexable cutting edges — 78 стр.
DIN 4000-76:2014-02
Отменен
Tabular layouts of properties - Part 76: Inserts, indexable — 20 стр.
DIN 4000-102:2017-06
Отменен
Tabular layouts of properties - Part 102: Data exchange for tabular layouts of properties with XML schema — 31 стр.
DIN 4003-87:2013-02
Отменен
Concept for the design of 3D models based on properties according to DIN 4000 - Part 87: End mills for indexable inserts — 116 стр.
DIN 4003-88:2013-12
Отменен
Concept for the design of 3D models based on properties according to DIN 4000 - Part 88: Milling cutter with arbor hole for indexable inserts — 86 стр.