Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 50133:1985-02

Отменен
Testing of metallic materials; Vickers hardness test, HV 0,2 to HV 100 — 7 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 50150:2000-10
Отменен
Testing of metallic materials - Conversion of hardness values — 52 стр.
DIN 51200:1985-10
Заменен
Materials testing machines; design and application of test piece holding devices in hardness testing machines — 7 стр.
DIN 51225-1:1985-01
Отменен
Materials testing machines; hardness testing machines with an optical indentation-measuring device; test forces from 49,03 to 29420 N — 6 стр.
DIN 51225-2:1985-10
Отменен
Material testing machines; hardness testing machines with an optical indentation-measuring device; test forces from 1,961 to less than 49,03 N (low load range) — 4 стр.
DIN ISO 409-1:1985-03
Отменен
Metallic materials; hardness test; tables of Vickers hardness values for use in tests made on flat surfaces; HV 5 to HV 100 — 22 стр.
DIN ISO 409-2:1987-02
Отменен
Metallic materials; hardness test; tables of Vickers hardness values for use in tests made on flat surfaces; HV 0,2 to less than HV 5; identical with ISO 409/2, edition 1983 — 14 стр.
DIN 51305:1995-01
Отменен
Material testing machines - Verification of Vickers hardness testing machines — 6 стр.
DIN EN ISO 6507-1:1998-01
Отменен
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:1997); German version EN ISO 6507-1:1997 — 95 стр.
DIN 50133-1:1972-12
Отменен
Testing of Metallic Materials; Vickers Hardness Testing; Test Load Range: 49 to 980 N (5 to 100 kp) — 7 стр.
DIN 50133-2:1972-12
Отменен
Testing of Metallic Materials; Vickers Hardness Testing; Test Load Range: 1.96 to 49 N (0.2 to 5 kp) (Minimum Load Range) — 7 стр.

На этот документ ссылаются

DIN 1749-2:1973-11
Отменен
Aluminium Drop Forgings (Highest Grade Aluminium, High Grade Aluminium and Wrought Aluminium Alloys); Technical Conditions of Delivery — 3 стр.
DIN 1746-1:1987-01
Отменен
Wrought aluminium and aluminium alloy tubes; properties — 4 стр.
DIN 128:1968-04
Отменен
Spring Washers; Curved or Crinkle Type (High Compression Load Spring Washers) — 3 стр.
DIN 1777:1986-01
Отменен
Wrought copper alloy strip for springs; technical delivery conditions — 8 стр.
DIN 984:1981-09
Отменен
Spring retaining rings with lugs for use in bores (internal circlips) — 10 стр.
DIN 101:1993-05
Отменен
Rivets; technical specifications — 8 стр.
DIN 137:1970-12
Отменен
Spring Washers; Curved or Crinkled — 2 стр.
DIN 267-11:1980-01
Отменен
Fasteners; technical delivery conditions (with additions to ISO 3506); corrosion-resistant stainless steel fasteners — 12 стр.
DIN 127:1970-12
Отменен
Spring Lock Washers; Barbed or Plain, with Rectangular Cross-section — 2 стр.
DIN 1715:1963-07
Отменен
Thermostatic Bi-metals — 6 стр.
DIN 983:1981-09
Отменен
Retaining rings with lugs for shafts — 11 стр.
DIN 267-4:1971-10
Отменен
Bolts, Screws, Nuts and Similar Threaded and Formed Parts; Technical Conditions of Delivery; Property Classes and Test Methods for Nuts of Unalloyed or Low Alloy Steels — 13 стр.
DIN 267-26:1987-10
Отменен
Fasteners; technical delivery conditions; steel spring washers for bolt/nut assemblies — 10 стр.
DIN 1859-3:1991-08
Отменен
Electrical kitchen machines for household use; electric slicers; characteristics of performance, requirements — 2 стр.
DIN 205:1996-12
Действует
Hand reamers for metric tapers — 3 стр.
DIN 1558:1969-05
Отменен
Manually-operated food slicers; concept, quality and safety specifications — 2 стр.
DIN 1859-2:1991-08
Отменен
Electrical kitchen machines; electric slicers; characteristics of performance, tests — 3 стр.
DIN 204:1996-12
Действует
Hand reamers for morse tapers — 3 стр.
DIN 5401-1:1993-11
Отменен
Rolling bearings - Balls of through-hardening rolling bearing steel — 9 стр.
DIN 7504:1992-02
Отменен
Self-drilling screws; dimensions, requirements and testing — 6 стр.
DIN 6913:1966-06
Отменен
Spring Washers with Safety Ring — 2 стр.
DIN 7516:1986-11
Отменен
Cross recessed head thread cutting screws; dimensions, requirements, testing — 4 стр.
DIN 5684-3:1972-06
Отменен
Round-steel Link Chains for Lifting Purposes; Grade 8, Calibrated, Tested — 5 стр.
DIN 7343:1969-04
Отменен
Spiral Pins; Normal Type — 2 стр.
DIN 7500-1:1995-08
Отменен
Thread rolling screws for ISO metric thread - Part 1: Dimensions, requirements, testing — 8 стр.
DIN 7504:1995-09
Отменен
Self-drilling screws with tapping screw thread - Dimensions, requirements and testing — 6 стр.
DIN 6700-2:1997-06
Отменен
Welding of railway vehicles and parts - Part 2: Qualification of manufacturer of welded rolling stock materials, quality assurance — 23 стр.
DIN 7344:1969-04
Отменен
Spiral Pins; Heavy Duty Type — 2 стр.
DIN 7513:1986-11
Отменен
Hexagon head and slotted head thread cutting screws; dimensions, requirements, testing — 4 стр.
DIN 7980:1972-12
Отменен
Single Coil Spring Lock Washers for Cheese Head Screws — 2 стр.
DIN 5684-2:1972-06
Отменен
Round-steel link chains for lifting purposes, grade 6, calibrated, tested — 5 стр.
DIN 5699:1994-02
Действует
Chain U-links (shackles) for conveyors — 7 стр.
DIN 16757:1989-05
Отменен
Compression and injection moulds; sprue puller — 2 стр.
DIN 16752-1:1989-05
Отменен
Compression- and injection moulds; sprue bushes — 3 стр.
DIN 11100:1975-08
Отменен
Agricultural Machinery; Soil Tilling Tools; Materials, Requirements, Testing — 2 стр.
DIN 13950-1:1985-06
Отменен
Dentistry; burs, cutters and abrasives; shanks — 3 стр.
DIN 13906-2:1988-03
Отменен
Dentistry; gold casting alloys; content of noble metals 60% to below 75%; requirements, testing — 4 стр.
DIN 11100:1991-01
Отменен
Agricultural machinery; tools for working the soil; requirements and test — 3 стр.
DIN 13912:1996-06
Отменен
Dentistry - Dental casting alloys - Basis nickel, cobalt, iron; requirements, testing — 4 стр.
DIN 13912-2:1989-06
Отменен
Dentistry; dental casting alloys; basis nickel, cobalt, iron; requirements, testing — 3 стр.
DIN 11300:1957-08
Отменен
— 1 стр.
DIN 9005-1:1973-11
Отменен
Drop Forgings of Wrought Magnesium Alloys; Technical Conditions of Delivery — 3 стр.
DIN 8563-10:1984-12
Отменен
Quality assurance of welding operations; stud welded joints on structural steels; stud welding with drawn-arc ignition and ring ignition — 9 стр.
DIN 30911-4:1990-10
Отменен
Sintered metal materials; sint-testing procedures; part 4: determination of apparent hardness — 2 стр.
DIN 30911-5:1990-10
Отменен
Sintered metal materials - Sint-testing procedures - Part 5: determination of case depth of heat treated parts — 3 стр.
DIN EN ISO 1797-1:1995-04
Отменен
Dental rotary instruments - Shanks - Part 1: Shanks made of metals (ISO 1797-1:1992); German version EN ISO 1797-1:1995 — 5 стр.
DIN 71412:1987-11
Действует
Lubricating nipples; cone type — 4 стр.
DIN 73126:1987-03
Действует
Gudgeon pins for reciprocating piston engines; dimensions, types finish, requirements, tests — 14 стр.
DIN EN 27785-1:1994-08
Отменен
Dental handpieces - Part 1: High-speed air-turbine handpieces (ISO 7785-1:1992); German version EN 27785-1:1994 — 6 стр.
DIN EN 27785-2:1994-02
Отменен
Dental handpieces; part 2: straight and geared angle handpieces (ISO 7785-2:1991); German version EN 27785-2:1993 — 6 стр.
DIN 65034:1987-11
Отменен
Aerospace; castings of steel, nickel- and cobalt alloys; technical specification — 23 стр.
DIN 65581:1992-04
Действует
Aerospace; titanium-alloy close-tolerance rivets and pure-titanium collars, metric series; technical specification — 12 стр.
DIN 65034:1992-06
Действует
Aerospace; castings of steel, nickel- and cobalt alloys; technical specification; inactive for new design — 23 стр.
DIN 65038-1:1989-08
Действует
Aerospace; steel, nickel- and cobalt-alloy bars; technical specification — 25 стр.
DIN 65035:1989-10
Отменен
Aerospace; steel, nickel- and cobalt-alloy stock, forgings and rings,; technical specifications — 24 стр.
DIN 53456:1973-01
Отменен
Testing of Plastics; Indentation Hardness Test — 3 стр.
DIN 53109:1993-09
Отменен
Testing of paper and board; determination of abrasion by the abrasion wheel method — 4 стр.
DIN 53799:1975-05
Отменен
Test methods for decorative laminated sheets on basis of aminoplastic resins — 11 стр.
DIN 53109:1985-11
Отменен
Testing of paper and board; determination of abrasion by the abrasion wheel method — 4 стр.
DIN 53157:1987-01
Отменен
Paints, varnishes and similar coating materials; assessment of the mechanical damping behaviour of coatings using the Kцnig pendulum apparatus (pendulum damping test) — 4 стр.
DIN 53799:1986-01
Отменен
Decorative laminated sheets on basis of aminoplastic resins; test method — 24 стр.
DIN 58279:1973-10
Отменен
First aid scissors — 3 стр.
DIN 58298-17:1975-09
Отменен
Materials, finish and testing of medical instruments; extracting forceps — 2 стр.
DIN 58298-16:1975-09
Отменен
Materials, finish and testing of medical instruments; scalers — 2 стр.
DIN 58358-3:1986-07
Отменен
Injection; cylinders and accessories for prefilled syringes for single use; aluminium caps for dental cartridges — 2 стр.
DIN 58298-15:1972-01
Отменен
Materials, finish and testing of medical instruments; explorers, filling- and carving instruments — 2 стр.
DIN EN 196-1:1990-03
Отменен
Methods of testing cement; determination of strength; german version EN 196-1:1987 (status as of 1989) — 16 стр.
DIN EN 485-1:1994-01
Отменен
Aluminium and aluminium alloys; sheet, strip and plate; part 1: technical conditions for inspection and delivery; German version EN 485-1:1993 — 9 стр.
DIN EN 1043-2:1996-11
Отменен
Destructive test on welds in metallic materials - Hardness test - Part 2: Micro hardness testing on welded joints; German version EN 1043-2:1996 — 9 стр.
DIN EN 1043-1:1996-02
Отменен
Destructive test on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints; German version EN 1043-1:1995 — 18 стр.
DIN EN 657:1994-06
Отменен
Thermal spraying; terminology, classification; German version EN 657:1994 — 9 стр.
DIN EN 196-1:1995-05
Отменен
Methods of testing cement - Part 1: Determination of strength; German version EN 196-1:1994 — 17 стр.
DIN EN 586-2:1994-11
Действует
Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements; German version EN 586-2:1994 — 8 стр.
DIN EN 485-2:1995-03
Отменен
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties; German version EN 485-2:1994 — 37 стр.
DIN EN 3380:1996-03
Действует
Aerospace series - Rings, retaining - Technical specification; German version EN 3380:1996 — 16 стр.
DIN 70909:1987-02
Отменен
Piston rings for automotive engineering; survey, general — 10 стр.
DIN ISO 1133:1993-02
Отменен
Plastics; determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics; identical with ISO 1133:1991 — 8 стр.
DIN ISO 5182:1995-03
Отменен
Welding - Materials for resistance welding electrodes and ancillary equipment; identical with ISO 5182:1991 — 9 стр.
DIN ISO 5182:1984-04
Отменен
Materials for resistance welding electrodes and ancillary equipment — 8 стр.
DIN ISO 898-6:1990-03
Отменен
Mechanical properties of fasteners; nuts with specified proof load values; fine pitch thread; identical with ISO 898-6:1988 (status as of 1989) — 9 стр.
DIN ISO 409-1:1985-03
Отменен
Metallic materials; hardness test; tables of Vickers hardness values for use in tests made on flat surfaces; HV 5 to HV 100 — 22 стр.
DIN ISO 898-5:1980-09
Отменен
Mechanical properties of fasteners; part 5, set screws and similar threaded fasteners not under tensile stresses — 7 стр.
DIN ISO 409-2:1987-02
Отменен
Metallic materials; hardness test; tables of Vickers hardness values for use in tests made on flat surfaces; HV 0,2 to less than HV 5; identical with ISO 409/2, edition 1983 — 14 стр.
DIN 42013:1988-08
Действует
Spring washers for axial adjustment of ball bearings of small motors — 3 стр.
DIN EN 10003-2:1995-01
Отменен
Metallic materials - Brinell hardness test - Part 2: Verification of Brinell hardness testing machines; German version EN 10003-2:1994 — 6 стр.
DIN EN 10088-2:1995-08
Отменен
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip for general purposes; German version EN 10088-2:1995 — 40 стр.
DIN EN 10218-1:1994-05
Отменен
Steel wire and wire products; general; part 1: test methods; German version EN 10218-1:1994 — 8 стр.
DIN 44976-3:1991-08
Отменен
Electrical kitchen machines; electric knives; characteristics of performance, requirements — 2 стр.
DIN 44976-2:1991-08
Отменен
Electrical kitchen machines; electric knives; characteristics of performance, tests — 3 стр.
DIN EN ISO 6507-1:1998-01
Отменен
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:1997); German version EN ISO 6507-1:1997 — 95 стр.
DIN EN ISO 3650:1999-02
Действует
Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998); German version EN ISO 3650:1998 — 13 стр.
DIN EN ISO 10477:1996-05
Отменен
Dentistry - Polymer based crown and bridge materials (ISO 10477:1992); German version EN ISO 10477:1996 — 10 стр.
DIN 50280:1975-10
Действует
Running Test on Radial Plain Bearings; General — 3 стр.
DIN 50133-1:1972-12
Отменен
Testing of Metallic Materials; Vickers Hardness Testing; Test Load Range: 49 to 980 N (5 to 100 kp) — 7 стр.
DIN 50191:1987-09
Отменен
Hardenability testing of steel by end quenching — 7 стр.
DIN 51955:1974-02
Отменен
Testing of Organic Floor Coverings (Except Textile Floor Coverings); Indentation Test for Determination of Recovery After Constant Load — 2 стр.
DIN 51200:1951-09
Отменен
Materials Testing; Hardness Testing; Directions for the Design and Use of Supporting Devices — 9 стр.
DIN 50133-2:1972-12
Отменен
Testing of Metallic Materials; Vickers Hardness Testing; Test Load Range: 1.96 to 49 N (0.2 to 5 kp) (Minimum Load Range) — 7 стр.
DIN 51225-2:1985-10
Отменен
Material testing machines; hardness testing machines with an optical indentation-measuring device; test forces from 1,961 to less than 49,03 N (low load range) — 4 стр.
DIN 51225:1995-01
Отменен
Material testing machines - Vickers hardness testing machines - Test forces from 1,961 N 980,7 N — 6 стр.