Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 668:1981-10

Отменен
Bright round steel; Dimenions, Permissible deviations according to ISO tolerance zone h11 — 5 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 1353-2:1971-04
Отменен
Abbreviations of Denominations for Half-finished Products — 4 стр.
DIN 16513:1993-09
Действует
Pure toluene as solvent for gravure inks — 1 стр.
DIN 16524-7:2001-05
Отменен
Testing of prints and inks for graphic technology - Resistance to various physical and chemical influences - Part 7: Behaviour of labels for beverage bottles on exposure to hot alkaline solution, resistance to alkaline solution — 4 стр.
DIN 1654-1:1989-10
Отменен
Cold heading and cold extruding steels; technical delivery conditions; general
DIN 1654-2:1989-10
Отменен
Cold heading and cold extruding steels; technical delivery conditions for killed unalloyed steels not intended for heat treatment — 4 стр.
DIN 1654-3:1989-10
Отменен
Cold heading and cold extruding steels; technical delivery conditions for case hardening steels
DIN 1654-4:1989-10
Отменен
Cold heading and cold extruding steels; technical delivery conditions for steels for quenching and tempering
DIN 1654-5:1989-10
Отменен
Cold heading and cold extruding steels; technical delivery conditions for stainless steels
DIN 17111:1980-09
Отменен
Low Carbon Unalloyed Steels for Bolts, Nuts and Rivets; Technical Conditions of Delivery — 10 стр.
DIN 17200:1987-03
Отменен
Steels for quenching and tempering; technical delivery conditions — 40 стр.
DIN 17210:1986-09
Отменен
Case hardening steels; technical delivery conditions — 20 стр.
DIN 17440:2001-03
Отменен
Stainless steels - Technical delivery conditions for drawn wire — 13 стр.
DIN 7160:1965-08
Отменен
ISO Allowances for External Dimensions (Shafts) for Nominal Dimensions from 1 to 500 mm — 8 стр.
DIN EN 10278:1999-12
Действует
Dimensions and tolerances of bright steel products; German version EN 10278:1999 — 9 стр.

На этот документ ссылаются

DIN 82239:1963-05
Отменен
Axle Pins for Hinged Blocks, Span Blocks, Cargo Blocks and Lead Blocks — 1 стр.
DIN 80402:1992-10
Отменен
Locking chains; assembly; component parts — 6 стр.
DIN 80402:1996-06
Отменен
Locking chains - Assembly, component parts — 8 стр.
DIN 80403-2:1988-12
Отменен
Socket pins; companion parts — 3 стр.
DIN 44427:1985-01
Отменен
Measurement and control; test source with container; dimensions, requirements — 4 стр.
DIN 44427:1972-08
Отменен
Test source for checking dose rate meters — 2 стр.
DIN 44427:1995-11
Отменен
Test source with container - Dimensions, materials and marking — 6 стр.
DIN 56923:1989-11
Действует
Stage engineering, stage equipment; socket hinges — 4 стр.
DIN 58729:1977-07
Отменен
Production in optical engineering; ball seats — 4 стр.
DIN 42905:1964-01
Отменен
Brushbolts for carbon-brush-holders — 1 стр.
DIN 42562-2:1987-04
Отменен
Transformers; silica gel breathers with fillings of 1,2 to 4,8 kg; components — 9 стр.
DIN 41097-4:1968-08
Отменен
Steel-tube support for electrical sirens 125 to 500 V<ähnlich>; skylight — 11 стр.
DIN 43119-2:1983-05
Действует
Revolving bolts for contact wire clamp for overhead equipment; revolving bolts with thread — 2 стр.
DIN 42561-1:1992-01
Отменен
Transformers - Rollers - Load carrying capacity up to 6,3 t — 4 стр.
DIN 43119-1:1981-09
Отменен
Revolving bolts for contact wire clamp for overhead equipment — 2 стр.
DIN 41097-1:1964-02
Отменен
Steel tube support for electrical siren 125-500 V a.c. standard type with and without electric protective insulation, parts list — 14 стр.
DIN 43832:1971-07
Отменен
Keys for measuring instruments — 2 стр.
DIN EN 10278:1999-12
Действует
Dimensions and tolerances of bright steel products; German version EN 10278:1999 — 9 стр.
DIN 17480:1984-09
Отменен
Valve materials; technical delivery conditions — 12 стр.
DIN 17440:1972-12
Отменен
Stainless Steels; Quality Specifications — 25 стр.
DIN 17115:1987-02
Отменен
Steels for welded round link chains; technical delivery conditions — 16 стр.
DIN 17443:1986-04
Отменен
Rolled and wrought stainless steel products for surgical implants; technical delivery conditions — 11 стр.
DIN 17440:1985-07
Отменен
Stainless steels; technical delivery conditions for plate and sheet, hot rolled strip, wire rod, drawn wire, steel bars, forgings and semi-finished products — 26 стр.
DIN 17221:1988-12
Отменен
Hot rolled steels for springs suitable for quenching and tempering - Technical delivery conditions — 12 стр.
DIN 17221:1972-12
Отменен
Hot Rolled Steels for Quenched and Tempered Springs; Quality Specifications — 8 стр.
DIN 17211:1987-04
Отменен
Nitriding steels - Technical delivery conditions — 14 стр.
DIN 17410:1977-05
Отменен
Materials for Permanent Magnets; Technical Conditions of Delivery — 8 стр.
DIN 17280:1985-07
Отменен
Steels with low temperature toughness; technical delivery conditions for plate, sheet, strip, wide flats, sections, bars and forgings — 17 стр.
DIN 17862:1973-11
Отменен
Rods of Titanium and Wrought Titanium Alloys — 2 стр.
DIN 17460:1992-09
Отменен
High temperature austenitic steel plate and sheet, cold and hot rolled strip, bars and forgings - Technical delivery conditions — 20 стр.
DIN 3402:1969-03
Отменен
Domed Head Lubricating Nipples — 2 стр.
DIN 4062:1978-09
Отменен
Cold processable plastic jointing materials for sewerdrains - Jointing materials for prefabricated parts of concrete, requirements, testing and processing — 14 стр.
DIN 21153-2:1979-12
Отменен
Shaft sinking; steel pulley for 63 kN max. rope tension — 4 стр.
DIN 21153-1:1979-12
Отменен
Shaft sinking; cast-iron pulley for 50 kN max. rope tension — 4 стр.
DIN 33891-2:1991-06
Отменен
Dust emission of technical equipment; determination of dust emission rate; handholding grinders — 6 стр.
DIN 5590:1978-12
Отменен
Compressed air equipment for rail vehicles; air reservoir — 8 стр.
DIN 11669:1961-05
Отменен
Honey extractors — 4 стр.
DIN 13046:1984-03
Действует
Trolley for stretchers, foldable — 12 стр.
DIN 11020:1954-07
Отменен
— 1 стр.
DIN 12893:1976-12
Отменен
Metal laboratory ware; stand rods — 2 стр.
DIN 13024-1:1985-07
Отменен
Stretcher with fixed poles; dimensions, requirements, testing — 15 стр.
DIN 13023:1987-09
Отменен
Hammock for the transportation of patients — 12 стр.
DIN 13024-1:1997-04
Отменен
Stretcher - Part 1: With fixed poles; dimensions, requirements, testing — 17 стр.
DIN 13231-1:1992-12
Отменен
Stretchers for use in aircrafts with fixed poles; foldable; dimensions, requirements, test — 17 стр.
DIN 16903-2:1974-12
Отменен
Closed Insert Nuts with Disc for Plastics Mouldings — 3 стр.
DIN 16903-1:1974-12
Отменен
Open Insert Nuts for Plastics Mouldings — 3 стр.
DIN 16903-3:1974-12
Отменен
Closed Insert Nuts with Dead Hole for Plastics Mouldings — 3 стр.
DIN 14826:1982-01
Отменен
Wheeled hose reel; dimensions, requirements — 5 стр.
DIN 14060:1980-12
Отменен
Fire fighting equipment; trough — 3 стр.
DIN 16903-4:1991-03
Отменен
Insert nuts; heavy type for plastics mouldings and pressure die castings with dead hole — 2 стр.
DIN 14826:1987-04
Отменен
Wheeled hose reel - Dimensions, requirements — 5 стр.
DIN 83418:1987-08
Отменен
Guide roller for rope hatch — 3 стр.
DIN 1652:1963-05
Отменен
Bright Unalloyed Steel; Technical Conditions of Delivery — 10 стр.
DIN 1652-1:1990-11
Отменен
Bright steel; general technical delivery conditions — 4 стр.
DIN 1651:1970-04
Отменен
Free Cutting Steels; Technical Conditions of Delivery — 10 стр.
DIN 1239-1:1963-06
Отменен
Covers for Well Shafts and Spring Water Chambers; Assemblies — 2 стр.
DIN 1654-1:1980-03
Отменен
Steels for Cold Heading and Cold Extruding; Technical Conditions of Delivery; General — 17 стр.
DIN 1913-1:1976-01
Отменен
Filler Electrodes for Joint Welding of Unalloyed and Low Alloy Steels; Classification, Designation, Technical Conditions of Delivery — 8 стр.
DIN 1651:1988-04
Отменен
Free-cutting steels; technical delivery conditions — 14 стр.
DIN 177:1988-11
Отменен
Cold drawn round steel wire; nominal diameters, limit deviations, mass — 3 стр.
DIN 8559-1:1984-07
Отменен
Filler metals for gas-shielded arc welding; wire electrodes, filler wires, solid rods and solid wires for gas-shielded arc welding of unalloyed and alloyed steels — 8 стр.
DIN 8575-1:1984-04
Отменен
Filler metals for arc welding of creep-resisting steels; classification, designation, technical delivery conditions — 11 стр.
DIN 8529-1:1981-04
Отменен
Covered electrodes for joint welding of high tensile fine-grained structural steels; Basic covered electrodes; Classification, designation, technical delivery conditions — 11 стр.
DIN 8573-1:1983-01
Отменен
Filler metals for welding unalloyed and low alloy cast iron materials; Designation; Technical delivery conditions — 8 стр.
DIN 8526:1977-11
Отменен
Testing of Soldering Joints; Gap Soldered Joints, Shear Test, Creep Shear Test — 4 стр.
DIN 8575-1:1983-12
Отменен
Filler metals for arc welding of steels for creep-resisting; classification, designation, technical conditions of delivery — 11 стр.
DIN 8555-1:1978-01
Отменен
Filler Metals Used in Surfacing; Designation, Technical Conditions of Delivery — 5 стр.
DIN 8555-1:1983-11
Отменен
Filler metals used for surfacing; filler wires, filler rods, wire electrodes, covered electrodes; designation; technical delivery conditions — 8 стр.