Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN EN 10002-1:1991-04

Отменен
Tensile testing of metallic materials; method of test at ambient temperature (including Corrigendum AC1:1990); german version EN 10002-1:1990 and AC 1:1990
ОписаниеИзмененияСсылкиВерсии

На этот документ ссылаются

DIN EN 60889:1997-08
Действует
Hard-drawn aluminium wire for overhead line conductors (IEC 60889:1987); German version EN 60889:1997 — 5 стр.
DIN EN 50183:2000-12
Действует
Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires; German version EN 50183:2000 — 10 стр.
DIN 86086:1996-06
Отменен
Fittings for butt welding into copper-nickel-alloy pipelines - Technical specifications — 4 стр.
DIN 86028:1997-07
Отменен
Welding necks of CuNi10Fe1,6Mn - Technical specifications — 4 стр.
DIN EN 10002-1:2001-12
Отменен
Metallic materials - Tensile testing - Part 1: Method of testing at ambient temperature; German version EN 10002-1:2001 — 54 стр.
DIN EN 10205:1992-01
Отменен
Cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel; german version EN 10205:1991 — 10 стр.
DIN 17459:1992-09
Отменен
Seamless circular high-temperature austenitic steel tubes; technical delivery conditions — 19 стр.
DIN 18807-7:1995-09
Отменен
Trapezoidal sheeting in buildings - Part 7: Aluminium trapezoidal sheeting and their connections; determination of load bearing capacity by test — 25 стр.
DIN 17022-1:1994-10
Действует
Heat treatment of ferrous materials - Methods of heat treatment - Part 1: Hardening, austempering, annealing, quenching, tempering of components — 17 стр.
DIN 17862:1993-02
Отменен
Titanium and titanium alloy bars; technical delivery conditions — 12 стр.
DIN 17864:1993-02
Отменен
Titanium and titanium wrought alloys forgings (hammer and drop forgings); technical delivery conditions — 16 стр.
DIN 17460:1992-09
Отменен
High temperature austenitic steel plate and sheet, cold and hot rolled strip, bars and forgings - Technical delivery conditions — 20 стр.
DIN ISO 4382-1:1992-11
Действует
Plain bearings; copper alloys; cast copper alloys for solid and multilayer thick-walled plain bearings; identical with ISO 4382-1:1991 — 7 стр.
DIN ISO 4382-2:1992-11
Действует
Plain bearings; copper alloys; wrought copper alloys for solid plain bearings; identical with ISO 4382-2:1991 — 4 стр.
DIN ISO 8535-1:1995-10
Отменен
Compression-ignition engines - Steel tubes for high-pressure fuel injection pipes - Part 1: Requirements for seamless cold-drawn single-wall tubes (ISO 8535-1:1990 + AMD 1:1993) — 7 стр.
DIN EN ISO 11961:1997-03
Отменен
Petroleum and natural gas industries - Steel pipes for use as drill pipe - Specification (ISO 11961:1996); German version EN ISO 11961:1996 — 24 стр.
DIN EN ISO 11960:1998-04
Отменен
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:1996); German version EN ISO 11960:1998 — 89 стр.
DIN 2393-2:1994-09
Отменен
Welded precision steel tubes - Part 2: Technical delivery conditions — 10 стр.
DIN 2394-2:1994-09
Отменен
As-welded and sized precision steel tubes - Part 2: Technical delivery conditions — 10 стр.
DIN 2395-2:1994-09
Отменен
Rectangular and square welded precision steel tubes - Part 2: Technical terms of delivery for general use — 8 стр.
DIN 2391-2:1994-09
Отменен
Seamless precision steel tubes - Part 2: Technical delivery conditions — 10 стр.
DIN 4035:1995-08
Отменен
Reinforced concrete pipes and suitable fittings - Dimensions - Technical specifications for delivery — 21 стр.
DIN 21521-2:1993-02
Действует
Rock bolts for mining and tunnel support; general specifications for steel-bolts; tests, testing methods — 7 стр.
DIN 24273:1998-01
Действует
Pumps and pump units for liquids - Material and product tests — 22 стр.
DIN EN ISO 9693:2000-12
Отменен
Dental ceramic fused to metal restorative materials (ISO 9693:1999); German version EN ISO 9693:2000 — 16 стр.
DIN EN ISO 8891:2000-11
Отменен
Dental casting alloys with noble metal content of at least 25 % but less than 75 % (ISO 8891:1998); German version EN ISO 8891:2000 — 12 стр.
DIN 5901:1995-11
Отменен
Flat bottom rails - Dimensions, sectional properties; steel grades — 16 стр.
DIN 13912:1996-06
Отменен
Dentistry - Dental casting alloys - Basis nickel, cobalt, iron; requirements, testing — 4 стр.
DIN 13971:1998-01
Отменен
Dentistry - Orthodontic wires — 5 стр.
DIN 16451-1:1994-06
Отменен
Fittings of ductile cast iron (GGG) for pressure piping of unplasticized polyvinylchloride (PVC-U) - Technical delivery specifications — 3 стр.
DIN EN ISO 1562:1995-04
Отменен
Dental casting gold alloys (ISO 1562:1993); German version EN ISO 1562:1995 — 6 стр.
DIN EN ISO 6871-1:1996-12
Отменен
Dental base metal casting alloys - Part 1: Cobalt-based alloys (ISO 6871-1:1994); German version EN ISO 6871-1:1996 — 6 стр.
DIN EN ISO 6871-2:1996-12
Отменен
Dental base metal casting alloys - Part 2: Nickel-based alloys (ISO 6871-2:1994); German version EN ISO 6871-2:1996 — 7 стр.
DIN 50145:1975-05
Отменен
Testing of Metallic Materials; Tensile Test — 16 стр.
DIN 50140:1980-09
Отменен
Testing of metallic materials; Tensile testing of tubes and tube strips — 4 стр.
DIN 50114:1981-08
Отменен
Testing of metals; Tensile test on sheet or strip less than 3 mm thick, not using an extensometer — 4 стр.
DIN 50125:1991-04
Отменен
Test pieces for the tensile testing of metallic materials — 8 стр.
DIN 50125:1986-03
Отменен
Testing of metallic materials; tensile test pieces — 9 стр.
DIN 51210-1:1976-04
Отменен
Testing of Metallic Materials; Tensile Test on Wires without Extensometer Measurement — 3 стр.
DIN 51233:1995-11
Отменен
Material testing machines - Safety specifications - Generals — 20 стр.
DIN 51210-2:1976-04
Отменен
Testing of Metallic Materials; Tensile Test on Wires with Extensometer Measurement — 2 стр.
DIN EN 2583:1997-03
Отменен
Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy, NI-PH2601 (Inconel 718); classification: 1275 MPa (at ambient temperature)/650 °C; technical specification; German version EN 2583:1997 — 33 стр.