Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 50150:2000-10

Отменен
Testing of metallic materials - Conversion of hardness values — 52 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 17200:1987-03
Отменен
Steels for quenching and tempering; technical delivery conditions — 40 стр.
DIN 17350:1980-10
Отменен
Tool Steels; Technical Conditions of Delivery — 27 стр.
DIN EN 10002-1:2001-12
Отменен
Metallic materials - Tensile testing - Part 1: Method of testing at ambient temperature; German version EN 10002-1:2001 — 54 стр.
DIN EN 10002-4:1995-01
Отменен
Metallic materials - Tensile test - Part 4: Verification of extensometers used in uniaxial testing; German version EN 10002-4:1994 — 7 стр.
DIN EN 10083-1:1996-10
Отменен
Quenched and tempered steels - Part 1: Technical delivery conditions for special steels (includes Amendment A1:1996); German version EN 10083-1:1991 + A1:1996 — 38 стр.
DIN EN ISO 6506-1:1999-10
Отменен
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:1999); German version EN ISO 6506-1:1999 — 17 стр.
DIN EN ISO 6507-1:1998-01
Отменен
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:1997); German version EN ISO 6507-1:1997 — 95 стр.
DIN EN ISO 6507-2:1998-01
Отменен
Metallic materials - Vickers hardness test - Part 2: Verification of the testing machines (ISO 6507-2:1997); German version EN ISO 6507-2:1997 — 8 стр.
DIN EN ISO 6508-1:1999-10
Отменен
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 1: Test method (ISO 6508-1:1999); German version EN ISO 6508-1:1999 — 14 стр.
DIN EN ISO 6508-2:1999-10
Отменен
Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 2: Verification and calibration of testing machines (ISO 6508-2:1999); German version EN ISO 6508-2:1999 — 12 стр.
DIN EN ISO 18265:2004-02
Отменен
Metallic materials - Conversion of hardness values (ISO 18265:2003); German version EN ISO 18265:2003 — 78 стр.
DIN 50150:1976-12
Отменен
Testing of Steel and Cast Steel; Conversion Table for Vickers Hardness, Brinell Hardness, Rockwell Hardness and Tensile Strength — 5 стр.

На этот документ ссылаются

DIN 1823-2:1981-12
Отменен
Angle cutters for toolmaking; Technical delivery conditions — 3 стр.
DIN 1652:1963-05
Отменен
Bright Unalloyed Steel; Technical Conditions of Delivery — 10 стр.
DIN 267-9:1979-08
Отменен
Mechanical Fasteners; Technical Conditions of Delivery, Components with Electroplated Coatings — 20 стр.
DIN 847-2:1981-12
Отменен
Double equal-angle cutters; Technical delivery conditions — 2 стр.
DIN 844-2:1981-12
Отменен
Parallel shank end mills; Technical delivery conditions — 4 стр.
DIN 267-15:1983-11
Отменен
Fasteners; technical delivery conditions; prevailing torque type nuts — 11 стр.
DIN 856-2:1981-12
Отменен
Half-round profile cutters, Convex; Technical delivery conditions — 2 стр.
DIN 1880-2:1990-04
Отменен
Shell end mills with key slot; technical delivery conditions — 5 стр.
DIN 1652-2:1990-11
Отменен
Bright steel made from structural steel; technical delivery conditions — 7 стр.
DIN 852-2:1981-12
Отменен
Shell type thread milling cutters for ISO metric screw threads; Technical delivery conditions — 4 стр.
DIN 267-4:1983-08
Отменен
Fasteners; technical delivery conditions; property classes for nuts (previous classes) — 8 стр.
DIN 267-23:1983-08
Отменен
Fasteners; technical delivery conditions; property classes for nuts with fine thread (ISO classes) — 9 стр.
DIN 855-2:1981-12
Отменен
Concave half-round profile cutters; Technical delivery conditions — 3 стр.
DIN 899:2001-10
Отменен
Hand operated wrenches and sockets - Technical specifications — 9 стр.
DIN 1893-2:1981-12
Отменен
Disc type thread milling cutters for ISO metric trapezoidal threads; technical specifications — 2 стр.
DIN 1892-2:1981-12
Отменен
Interlocking cylindrical cutters; technical specifications — 2 стр.
DIN 1834-2:1986-01
Отменен
Narrow side and face milling cutters; technical specifications — 3 стр.
DIN 851-3:1981-06
Отменен
T-slot cutters; technical specifications — 3 стр.
DIN 1823-2:1990-04
Отменен
Side-angle cutters for toolmaking; technical delivery conditions — 4 стр.
DIN 845-2:1981-12
Отменен
End mills with morse taper shank; technical specifications — 4 стр.
DIN 885-2:1981-12
Отменен
Side end face milling cutters; technical specifications — 3 стр.
DIN 327-2:1981-12
Отменен
Parallel shank slot drills; technical specifications — 3 стр.
DIN 884-2:1981-12
Отменен
Solid cylindrical cutters; technical specifications — 3 стр.
DIN 845-2:1981-06
Отменен
End mills with Morse taper shank; technical specifications — 4 стр.
DIN 884-2:1981-06
Отменен
Solid cylindrical cutters; technical specifications — 3 стр.
DIN 1880-2:1981-12
Отменен
Shell end mills with tenon drive; technical specifications — 3 стр.
DIN 326-2:1981-12
Отменен
Slotting drills with morse taper shank; technical specifications — 3 стр.
DIN 1893-2:1981-06
Отменен
Disc type thread milling cutters for ISO metric trapezoidal threads; technical specifications — 2 стр.
DIN 856-2:1981-06
Отменен
Convex milling cutters; technical specifications — 2 стр.
DIN 852-2:1981-06
Отменен
Shell type thread milling cutters for ISO metric threads; technical specifications — 4 стр.
DIN 851-3:1981-12
Отменен
T-slot cutters; technical specifications — 3 стр.
DIN 855-2:1981-06
Отменен
Concave milling cutters; technical specifications — 3 стр.
DIN 1833-2:1981-12
Отменен
Dovetail cutters with parallel shank; technical specifications — 3 стр.
DIN 844-2:1981-06
Отменен
Parallel shank end mills; technical specifications — 4 стр.
DIN 1889-5:1983-12
Отменен
Die-sinking cutters; technical specifications — 4 стр.
DIN 1892-2:1981-06
Отменен
Interlocking cylindrical cutters; technical specifications — 2 стр.
DIN 1833-2:1981-06
Отменен
Dovetail cutters with parallel shank; technical specifications — 3 стр.
DIN 885-2:1981-06
Отменен
Side end face milling cutters; technical specifications — 3 стр.
DIN 6913:1966-06
Отменен
Spring Washers with Safety Ring — 2 стр.
DIN 6773-3:1976-11
Отменен
Heat Treatment of Ferrous Metals - Heat-treated Parts - Representation and Indications in Drawings; Surface Layer Hardening — 8 стр.
DIN 7980:1972-12
Отменен
Single Coil Spring Lock Washers for Cheese Head Screws — 2 стр.
DIN 6513-2:1981-12
Отменен
Corner-rounding cutters; technical specifications — 2 стр.
DIN 6513-2:1981-06
Отменен
Corner-rounding cutters; technical specifications — 2 стр.
DIN 16716:1963-08
Отменен
Compression moulds and injection moulds for moulding materials; guide bushes with shoulder — 2 стр.
DIN 11300:1957-08
Отменен
— 1 стр.
DIN 9825-1:1963-08
Отменен
Guide pins with shoulder for compression moulds and injection moulds — 3 стр.
DIN 73126-3:1979-08
Отменен
Gudgeon pins for reciprocating piston engines; concepts, test of quality characteristics — 5 стр.
DIN 73126-1:1979-08
Отменен
Gudgeon pins for reciprocating piston engines; dimensions, designation, materials, specifications — 8 стр.
DIN EN ISO 18265:2004-02
Отменен
Metallic materials - Conversion of hardness values (ISO 18265:2003); German version EN ISO 18265:2003 — 78 стр.
DIN 58298-17:1975-09
Отменен
Materials, finish and testing of medical instruments; extracting forceps — 2 стр.
DIN 58298-16:1975-09
Отменен
Materials, finish and testing of medical instruments; scalers — 2 стр.
DIN 58298-15:1972-01
Отменен
Materials, finish and testing of medical instruments; explorers, filling- and carving instruments — 2 стр.
DIN 69844-2:1990-04
Отменен
ANS-end mills with parallel shank; technical delivery conditions — 11 стр.
DIN 70909:1987-02
Отменен
Piston rings for automotive engineering; survey, general — 10 стр.
DIN ISO 14635-2:2010-01
Действует
Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils (ISO 14635-2:2004) — 24 стр.
DIN ISO 14635-1:2006-05
Действует
Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils (ISO 14635-1:2000) — 27 стр.
DIN 50150:1976-12
Отменен
Testing of Steel and Cast Steel; Conversion Table for Vickers Hardness, Brinell Hardness, Rockwell Hardness and Tensile Strength — 5 стр.
DIN 50351:1985-02
Отменен
Testing of metallic materials; Brinell hardness test — 7 стр.
DIN 50133-1:1972-12
Отменен
Testing of Metallic Materials; Vickers Hardness Testing; Test Load Range: 49 to 980 N (5 to 100 kp) — 7 стр.
DIN 50103-2:1984-03
Отменен
Testing of metallic materials; Rockwell hardness test; N and T scales — 7 стр.
DIN 50133-2:1972-12
Отменен
Testing of Metallic Materials; Vickers Hardness Testing; Test Load Range: 1.96 to 49 N (0.2 to 5 kp) (Minimum Load Range) — 7 стр.
DIN 50103-1:1984-03
Отменен
Testing of metallic materials; Rockwell hardness test; C, A, B, F scales — 7 стр.
DIN 50133:1985-02
Отменен
Testing of metallic materials; Vickers hardness test, HV 0,2 to HV 100 — 7 стр.
DIN 51354-1:1977-08
Отменен
Testing of lubricants; mechanical testing of lubricants in the FZG gearrig test machine, general working principles — 7 стр.
DIN 50311:1982-01
Отменен
Testing of abrasives; hardness test of metallic abrasives — 2 стр.
DIN 2328-2:1990-04
Отменен
End mills with 7/24 taper shank; technical delivery conditions — 5 стр.
DIN 2094:1981-03
Отменен
Road vehicle leaf springs; requirements — 8 стр.
DIN 17350:1980-10
Отменен
Tool Steels; Technical Conditions of Delivery — 27 стр.
DIN 17115:1972-08
Отменен
Steels for Welded Round Link Chains; Quality Specifications — 9 стр.
DIN 17210:1986-09
Отменен
Case hardening steels; technical delivery conditions — 20 стр.
DIN 17100:1980-01
Отменен
Steels for General Structural Purposes; Quality Standard — 19 стр.
DIN 22258-1:1980-03
Отменен
Connecting chain links; flat connecting links, dimensions, mechanical requirements, testing — 4 стр.
DIN 22258-2:1983-09
Отменен
Connecting chain links; "Kenter" connecting links; dimensions, mechanical requirements, testing — 4 стр.
DIN 22258-3:1983-09
Отменен
Connecting chain links; block connecting links; dimensions, mechanical requirements, testing — 4 стр.
DIN 22258-2:2003-08
Отменен
Chain connectors - Part 2: Kenter type connectors — 15 стр.
DIN 22258-1:2003-04
Отменен
Chain connectors - Part 1: Flat type connectors — 14 стр.
DIN 22258-1:2002-10
Отменен
Chain connectors - Part 1: Flat type connectors — 14 стр.
DIN 22258-3:2003-08
Отменен
Chain connectors - Part 3: Block type connectors — 13 стр.
DIN 22256:2002-10
Действует
Chain sprockets for chain conveyors and coal winning equipment - Dimensions, requirements, testing — 19 стр.
DIN 2328-2:1999-04
Отменен
End mills with 7/24 taper shank - Part 2: Technical delivery conditions — 10 стр.
BS ISO 14635-2:2004
Действует
Gears. FZG test procedures. FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils — 28 стр.
DIN 1880-2:2003-09
Отменен
Shell end mills with tenon and parallel key drive - Part 2: Technical delivery conditions — 9 стр.
DIN 50190-4:1999-09
Отменен
Hardness depth of heat-treated parts - Part 4: Determination of the fusion hardening depth and the fusion depth — 6 стр.