DIN 18516-3:2011-11

Отменен

Cladding for external walls, ventilated at rear - Part 3: Natural stone; requirements, design — 48 стр.

Ссылочные документы

DIN EN ISO 3506-4:2010-04

Действует

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009); German version EN ISO 3506-4:2009 — 26 стр.

DIN 18516-1:2010-06

Действует

Cladding for external walls, ventilated at rear - Part 1: Requirements, principles of testing — 27 стр.

DIN EN ISO 3506-1:2010-04

Отменен

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009); German version EN ISO 3506-1:2009 — 35 стр.

DIN EN ISO 3506-2:2010-04

Отменен

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009); German version EN ISO 3506-2:2009 — 28 стр.

DIN EN ISO 3506-3:2010-04

Действует

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009); German version EN ISO 3506-3:2009 — 24 стр.

DIN 4149:2005-04

Отменен

Buildings in german earthquake areas - Design loads, analysis and structural design of buildings — 82 стр.

DIN EN 10088-3:2005-09

Отменен

Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes; German version EN 10088-3:2005 — 63 стр.

DIN EN 12371:2010-07

Действует

Natural stone test methods - Determination of frost resistance; German version EN 12371:2010 — 16 стр.

DIN EN 12372:2007-02

Отменен

Natural stone test methods - Determination of flexural strength under concentrated load; German version EN 12372:2006 — 17 стр.

DIN EN 12971-1:1999-07

Действует

Reinforcements - Specification for textile glass chopped strands - Part 1: Designation; German version EN 12971-1:1999 — 5 стр.

DIN EN 13161:2008-08

Действует

Natural stone test methods - Determination of flexural strength under constant moment; German version EN 13161:2008 — 18 стр.

DIN EN 13364:2002-03

Действует

Natural stone test methods - Determination of the breaking load at dowel hole; German version EN 13364:2001 — 18 стр.

DIN EN ISO 4032:2001-03

Отменен

Hexagon nuts, style 1 - Product grades A and B (ISO 4032:1999); German version EN ISO 4032:2000 — 11 стр.

DIN SPEC 1021-4-5*DIN CEN/TS 1992-4-5:2009-08

Действует

Design of fastenings for use in concrete - Part 4-5: Post-installed fasteners - Chemical systems; German version CEN/TS 1992-4-5:2009

DIN 52008:2006-03

Действует

Natural stone test methods - Assessment of the weathering resistance — 21 стр.

DIN 53505:2000-08

Отменен

Testing of rubber - Shore A and Shore D hardness test — 5 стр.

DIN EN 206-1:2001-07

Отменен

Concrete - Part 1: Specification, performance, production and conformity; German version EN 206-1:2000 — 79 стр.

DIN EN 998-2:2010-12

Отменен

Specification for mortar for masonry - Part 2: Masonry mortar; German version EN 998-2:2010 — 30 стр.

DIN EN 1469:2005-02

Отменен

Natural stone products - Slabs for cladding - Requirements; German version EN 1469:2004 — 28 стр.

DIN EN 1504-6:2006-11

Действует

Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar; German version EN 1504-6:2006 — 25 стр.

DIN EN 10088-2:2005-09

Отменен

Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes; German version EN 10088-2:2005 — 48 стр.

DIN 18516-3:2013-09

Отменен

Cladding for external walls, ventilated at rear - Part 3: Natural stone; requirements, design — 49 стр.

DIN 18516-3:1999-12

Отменен

Cladding for external walls, ventilated at rear - Part 3: Natural stone; requirements, design — 12 стр.

DIN 18516-3:2010-06

Отменен

Cladding for external walls, ventilated at rear - Part 3: Natural stone; requirements, design

На этот документ ссылаются

DIN 18516-3:1999-12

Отменен

Cladding for external walls, ventilated at rear - Part 3: Natural stone; requirements, design — 12 стр.

DIN 18332:2012-09

Отменен

German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Natural stone work — 23 стр.

DIN 18516-3:2013-09

Отменен

Cladding for external walls, ventilated at rear - Part 3: Natural stone; requirements, design — 49 стр.

DIN 1053-4:2013-04

Отменен

Masonry - Part 4: Prefabricated masonry compound units — 26 стр.