Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN ISO 1101:1985-03

Отменен
Technical drawings, geometrical tolerancing, tolerances of form, orientation, location and runout; generalities, definitions, symbols on drawings — 26 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN EN ISO 12866:2009-03
Действует
Ophthalmic instruments - Perimeters (ISO 12866:1999+Amd1:2008); German version EN ISO 12866:1999+AC:2000+A1:2008 — 19 стр.
DIN EN ISO 12944-5:2008-01
Отменен
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2007); German version EN ISO 12944-5:2007 — 36 стр.
DIN ISO 1660:1988-07
Отменен
Technical drawings; dimensioning and tolerancing of profiles; identical with ISO 1660:1987 — 5 стр.
DIN EN ISO 2692:2007-04
Отменен
Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006); German version EN ISO 2692:2006 — 47 стр.
DIN ISO 5459:1982-01
Отменен
Technical drawings; geometrical tolerancing; datums and datum-systems for geometrical tolerances — 15 стр.
DIN ISO 7083:1984-06
Действует
Technical drawings; symbols for geometrical tolerancing; proportions and dimensions — 9 стр.
DIN ISO 8015:1986-06
Отменен
Technical drawings; fundamental tolerancing principle; identical with ISO 8015, edition 1985 — 5 стр.
DIN EN ISO 1101:2006-02
Отменен
Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004); German version EN ISO 1101:2005 — 68 стр.
DIN 7184-1:1972-05
Отменен
Tolerances of Form and Position; Definitions, Indications on Drawings — 19 стр.
DIN 7184-1 Beiblatt 1:1973-02
Отменен
Tolerances of form and position; definitions, indication on drawings, summary — 2 стр.

На этот документ ссылаются

DIN 850-2:1990-04
Действует
Woodruff cutters; technical delivery conditions — 6 стр.
DIN 536-1:1991-09
Действует
Craine rails; dimensions, sectional properties, steel grades for crane rails with foot flange, form A — 5 стр.
DIN 844-2:1990-04
Действует
Parallel shank end mills; technical delivery conditions — 7 стр.
DIN 327-2:1990-04
Действует
Parallel shank slot drills; technical delivery conditions — 5 стр.
DIN 1823-2:1992-03
Действует
Single-angle cutters for toolmaking; technical delivery conditions — 4 стр.
DIN 1880-2:1995-05
Отменен
Shell end mills with tenon and parallel key drive - Part 2: Technical delivery conditions — 6 стр.
DIN 1833-2:1990-04
Действует
Parallel shank dovetail cutters; technical delivery conditions — 5 стр.
DIN 842-2:1990-01
Действует
Shell type single angle milling cutters; technical delivery conditions — 4 стр.
DIN 810:1986-11
Действует
Machine tools; presses; slide holes for shanks of press tools; dimensions — 2 стр.
DIN 5402-3:1993-03
Отменен
Rolling bearings; rolling bearing components; needle rollers — 4 стр.
DIN 7753-3:1986-02
Действует
Endless narrow V-belts for the automotive industry; dimensions of belts and pulley groove profiles — 6 стр.
DIN 6930-2:1989-04
Отменен
Steel stampings; general tolerances — 9 стр.
DIN 6518-2:1990-04
Действует
Corner rounding concave milling cutters with parallel shank; technical delivery conditions — 4 стр.
DIN 7167:1987-01
Отменен
Relationship between tolerances of size, form, and parallelism; envelope requirement without individual indication on the drawing — 2 стр.
DIN 7184-1:1972-05
Отменен
Tolerances of Form and Position; Definitions, Indications on Drawings — 19 стр.
DIN 6513-2:1990-04
Действует
Corner rounding concave cutters; technical delivery conditions — 4 стр.
DIN 7168:1991-04
Отменен
General tolerances for linear and angular dimensions and geometrical tolerances (not to be used for new designs) — 7 стр.
DIN 7184-1 Beiblatt 1:1973-02
Отменен
Tolerances of form and position; definitions, indication on drawings, summary — 2 стр.
DIN 7867:1986-06
Действует
V-ribbed belts and corresponding pulleys — 7 стр.
DIN 6386-1:2014-03
Действует
Lathe chucks - Part 1: Technical conditions of delivery for hand operated lathe chucks — 11 стр.
DIN 6930-2:2010-01
Отменен
Stamped steel parts - Part 2: General tolerances — 16 стр.
DIN 6930-2:2010-09
Отменен
Stamped steel parts - Part 2: General tolerances — 16 стр.
DIN 5402-1:1993-12
Отменен
Rolling bearings; parts of rolling bearings; cylindrical rollers — 6 стр.
DIN 6827-2:2003-05
Отменен
Recording of the medical application of ionizing radiation - Part 2: Diagnosis and therapy using unsealed radioactive materials — 9 стр.
DIN 7868-3:1986-06
Действует
Rubber and plastics covered rollers; dimensional and geometrical tolerances — 10 стр.
DIN 16966-7:1995-04
Действует
Pipe joints and their elements of glass fibre reinforced polyester resins - Part 7: Bushings, flanges, flanged and butt joints; general quality requirements and test methods — 7 стр.
DIN 16941:1986-05
Отменен
Thermoplastics extruded profiles; general tolerances of size, form and orientation — 6 стр.
DIN 16903-4:1991-03
Отменен
Insert nuts; heavy type for plastics mouldings and pressure die castings with dead hole — 2 стр.
DIN 15502-1:1989-06
Действует
Film 35 mm; image area produced by camera aperture and projectable image area; aspect ratio 1,37 : 1 — 3 стр.
DIN 15435-2:1992-04
Действует
Power transmission engineering; drum brakes; brake shoes — 5 стр.
DIN 8620-2:1994-01
Отменен
Machine tools - Boring and milling machines with horizontal spindle; table type machines - Acceptance conditions — 19 стр.
DIN 31699:1986-07
Отменен
Plain bearings; shafts, collars, thrust collars; geometrical tolerances and surface roughness — 3 стр.
DIN 31670-8:1986-07
Действует
Plain bearings; quality assurance of plain bearings; checking the geometrical tolerances and surface roughness of shafts, collars, and thrust collars — 4 стр.
DIN EN 14781:2006-03
Отменен
Racing bicycles - Safety requirements and test methods; German version EN 14781:2005 — 84 стр.
DIN EN ISO 1101:2006-02
Отменен
Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004); German version EN ISO 1101:2005 — 68 стр.
DIN 72311-21:1988-01
Отменен
Lead storage batteries; starter batteries with 10,5 basic fastening lugs for commercial vehicles; nominal capacities and main dimensions — 3 стр.
DIN 72311-20:1989-05
Отменен
Lead storage batteries; starter batteries for commercial vehicles; nominal capacities and main dimensions — 3 стр.
DIN 73451:1994-04
Отменен
Clutch facings; dimensions and tolerances — 3 стр.
DIN EN 186000-1:1994-03
Отменен
Generic specification; connector sets for optical fibres and cables; part 1: requirements, test methods and qualification approval procedures; German version EN 186000-1:1993 — 122 стр.
DIN EN 60086-2:2005-03
Отменен
Primary batteries - Part 2: Physical and electrical specifications (IEC 60086-2:2000 + A1:2001 + A2:2004); German version EN 60086-2:2001 + A1:2001 + A2:2004 — 57 стр.
DIN EN 60086-2:2001-09
Отменен
Primary batteries - Part 2: Physical and electrical specifications (IEC 60086-2:2000); German version EN 60086-2:2001 — 53 стр.
DIN 53427:1986-11
Отменен
Determination of shear strength of rigid cellular materials sandwiched between metal plates — 3 стр.
DIN 58926-2:1988-10
Отменен
Blanks for optical elements; lenses of precision optics; permissible deviations — 2 стр.
DIN EN 286-3:1994-11
Действует
Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock; German version EN 286-3:1994 — 34 стр.
DIN EN 196-1:1995-05
Отменен
Methods of testing cement - Part 1: Determination of strength; German version EN 196-1:1994 — 17 стр.
DIN EN 286-4:1994-11
Действует
Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock; German version EN 286-4:1994 — 29 стр.
DIN 70907:1991-04
Действует
Piston rings; test of quality characteristics; terms, measuring procedures; supplement to DIN ISO 6621 Part 2 — 5 стр.
DIN ISO 7648:1988-10
Действует
Flywheel housings for reciprocating internal combustion engines; nominal dimensions and tolerances; identical with ISO 7648:1987 — 8 стр.
DIN ISO 8536-1:2001-01
Отменен
Infusion equipment for medical use - Part 1: Infusion glass bottles (ISO 8536-1:2000) — 8 стр.
DIN ISO 2692:1990-05
Отменен
Technical drawings; geometrical tolerancing; maximum material principle; identical with ISO 2692:1988 — 23 стр.
DIN ISO 10578:1994-05
Отменен
Technical drawings; tolerancing of orientation and of location; projected tolerance zone; identical with ISO 10578:1992 — 6 стр.
DIN ISO 3019-2:1991-09
Отменен
Hydraulic fluid power; positive displacement pumps and motors; dimensions and identification code for mounting flanges and shaft ends; part 2: 2 and 4-hole flanges and shaft ends, metric series; identical with ISO 3019-2:1986 — 13 стр.
DIN ISO 3040:1991-09
Отменен
Technical drawings; dimensioning and tolerancing; cones; identical with ISO 3040:1990 — 6 стр.
DIN ISO 10579:1994-03
Отменен
Technical drawings; dimensioning and tolerancing; non-rigid parts; identical with ISO 10579:1993 — 5 стр.
DIN ISO 8015:1986-06
Отменен
Technical drawings; fundamental tolerancing principle; identical with ISO 8015, edition 1985 — 5 стр.
DIN ISO 8775:1988-06
Действует
Aerospace; gaseous oxygen replenishment connection for use in fluid systems (new type); dimensions (inch series); identical with ISO 8775:1988 — 4 стр.
DIN ISO 6624-1:1990-06
Отменен
Internal combustion engines; piston rings; keystone rings; identical with ISO 6624-1:1986 — 18 стр.
DIN ISO 6622-1:1990-06
Отменен
Internal combustion engines; piston rings; rectangular rings; identical with ISO 6622-1:1986 — 18 стр.
DIN ISO 7649:1992-04
Действует
Clutch housings for reciprocating internal combustion engines; nominal dimensions and tolerances; identical with ISO 7649:1991 — 5 стр.
DIN ISO 8362-1:1990-12
Отменен
Injection containers for injectables and accessories; injection vials made of glass tubing; identical with ISO 8362-1:1989 — 4 стр.
DIN 41653:1988-03
Отменен
Sectional specification for connectors; functional gauges for low-frequency connectors; calculating, general requirements — 7 стр.
DIN EN ISO 8362-4:2004-09
Отменен
Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2003); German version EN ISO 8362-4:2004, text in German and English — 17 стр.
DIN 52310-2:1991-01
Отменен
Headform impact test on safety glazing materials for road vehicles with decleration measurement — 23 стр.
DIN 2192:2002-08
Действует
Flat form springs - Quality requirements — 12 стр.
DIN 2310-5:1990-12
Отменен
Thermal cutting - Laser cutting of metallic materials - Principles of process, quality and dimensional tolerances — 4 стр.
DIN 2250-1:1989-11
Отменен
General-purpose GO ring gauges and setting ring gauges for pneumatic length measuring instruments from 1 mm up to 315 mm nominal diameter — 3 стр.
DIN 2272-1:1985-08
Отменен
Inspection equipment used in dimensional metrology; requirements; auxiliary measuring devices — 5 стр.
DIN 2310-1:1987-11
Отменен
Thermal cutting - Terminology and nomenclature — 5 стр.
DIN 2310-4:1987-09
Отменен
Thermal cutting - Arc plasma cutting - Process principles, terminology, quality, dimensional tolerances — 4 стр.
DIN 2310-2:1987-11
Отменен
Thermal cutting - Determination of quality of cut faces — 4 стр.
DIN 2250-2:1989-11
Отменен
GO ring gauges and setting ring gauges from 1 mm up to 315 mm nominal diameter for use in precision engineering — 3 стр.
DIN 2137-10:1995-07
Отменен
Text and office systems - Keyboards - Part 10: German keyboard for data and text processing as well as for typewriters; arrangement of key positions and key distances — 8 стр.
DIN 19071-3:1990-06
Отменен
Microfilm 16 mm; document marks (blips) — 3 стр.
DIN 21552:1991-04
Отменен
Mine support; IB- and GI-sections, beaded — 3 стр.
DIN 22116:1994-10
Отменен
Belt conveyors for underground coal mining - Pressure rollers DN 159 - Dimensions, requirements, marking — 4 стр.
DIN 28005-1:1988-11
Отменен
General tolerances for vessels; general-purpose vessels — 7 стр.
DIN 28060:1986-11
Отменен
Brick-lined vessels and apparatus; design and construction — 3 стр.
DIN 28060 Beiblatt 1:1986-12
Отменен
Brick-lined vessels and apparatus; examples for test methods for tolerances — 4 стр.
DIN 34110:1991-11
Действует
Piston rings for general engineering; R-rings, plain compression rings, 10 up to 1200 mm nominal diameter — 6 стр.
DIN 58413:1987-11
Отменен
Tolerances for gear hobs for fine mechanics — 7 стр.
DIN 1831-2:1990-04
Отменен
Inserted tooth side and face milling cutters; technical delivery consitions — 4 стр.
DIN 1892-2:1990-04
Отменен
Interlocking cylindrical cutters; technical delivery conditions — 4 стр.
DIN 852-2:1990-02
Отменен
Bore type thread milling cutters for ISO metric threads; technical delivery conditions — 4 стр.
DIN 1891-2:1990-04
Отменен
Interlocking slotting cutters; technical delivery conditions — 5 стр.
DIN 1889-5:1990-04
Отменен
Die-sinking cutters; technical delivery conditions — 8 стр.
DIN 326-2:1990-01
Отменен
Slot drills with Morse taper shank; technical delivery conditions — 5 стр.
DIN 884-2:1990-05
Отменен
Cylindrical milling cutters; technical delivery conditions — 4 стр.
DIN 1893-2:1990-04
Отменен
Side and face thread milling cutters for ISO metric trapezoidal threads; technical delivery conditions — 4 стр.
DIN 1890-2:1990-04
Отменен
Straight relieved tooth slotting cutters; technical delivery conditions — 4 стр.
DIN 69844-2:1995-02
Отменен
ANS-end mills with parallel shank - Part 2: Technical delivery conditions — 13 стр.
DIN ISO 1660:1988-07
Отменен
Technical drawings; dimensioning and tolerancing of profiles; identical with ISO 1660:1987 — 5 стр.
DIN 845-2:1990-04
Отменен
Morse taper shank end mills; technical delivery conditions — 6 стр.
DIN 851-3:1990-05
Отменен
T-slot cutters; technical delivery conditions — 5 стр.
DIN 406-12:1992-12
Отменен
Engineering drawing practice; dimensioning; tolerancing of linear and angular dimensions (modified version of ISO 406:1987) — 6 стр.
DIN ISO 7368:1994-02
Отменен
Hydraulic fluid power; two-port slip-in cartridge valves; cavities; identical with ISO 7368:1989 — 19 стр.
DIN ISO 8788:1988-05
Отменен
Aerospace; fasteners; tolerances of form and position for nuts; identical with ISO 8788, edition 1987 — 12 стр.
DIN 6529:1992-02
Отменен
Parallel shank solid hardmetal end mills; technical delivery conditions — 8 стр.
DIN 7721-2:1989-06
Отменен
Synchronous belt drives, metric pitch; tooth space profile of synchronous pulleys — 4 стр.
DIN ISO 7913:1986-05
Отменен
Aerospace; fasteners, tolerances of form and position for bolts and screws; identical with ISO 7913, edition 1985 — 8 стр.
DIN 406-10:1992-12
Отменен
Engineering drawing practice; dimensioning; concepts and general principles — 6 стр.