Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 802-4:1994-08

Отменен
Ground thread taps for ISO metric threads of tolerances 7G, 8G and special tolerances, coarse and fine pitches - Part 4: Manufacturing tolerances on the threaded portion — 6 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 13-14:1982-08
Отменен
ISO metric screw threads; Principles for a tolerance system for screw threads from 1 mm diameter upwards — 8 стр.
DIN 13-15:1982-08
Отменен
ISO metric screw threads; Fundamental deviations and tolerances for screw threads from 1 mm diameter upwards — 6 стр.
DIN 13-27:1983-12
Отменен
ISO metric screw threads; coarse and fine screw threads from 1 to 355 mm screw thread diameter; deviations — 17 стр.
DIN 2197:1981-03
Отменен
Screwing taps; technical specifications for grinded high-steel taps — 10 стр.
DIN 802-4:2012-01
Действует
Ground thread taps for ISO metric threads of tolerances 7G, 8G and special tolerances, coarse and fine pitches - Part 4: Manufacturing tolerances on the threaded portion

На этот документ ссылаются

DIN 4000-80:2005-01
Отменен
Tabular layouts of properties - Part 80: Screwing tabs, cold forming taps and screwing dies — 14 стр.
DIN 2181:2003-04
Отменен
Sets of 2 taps for metric fine ISO-threads M1 × 0,2 to M52 × 4 — 6 стр.
DIN 4000-164:2010-10
Действует
Tabular layouts of properties - Part 164: Standards, setting masters and normals for geometrical quantities — 43 стр.
DIN 4000-165:2010-10
Действует
Tabular layouts of properties - Part 165: Gauges for geometrical quantities — 39 стр.
DIN 2197:2008-11
Отменен
Screwing taps - Technical delivery conditions for ground high-speed steel taps — 22 стр.
DIN 4000-80:2011-08
Отменен
Tabular layouts of properties - Part 80: Screwing taps, cold forming taps and screwing dies — 19 стр.
DIN 2197:1998-09
Отменен
Screwing taps - Technical delivery conditions for grinded high-steel taps — 17 стр.
DIN 2181:1998-09
Отменен
Sets of 2 taps for metric fine ISO-threads M1 Ч 0,2 to M52 Ч 4 — 6 стр.
DIN 376:2008-11
Отменен
Machine screwing taps for coarse pitch metric ISO-thread M3 to M68 — 6 стр.
DIN 374:1998-07
Отменен
Machine screwing taps for fine pitch metric ISO-threads M3 Ч 0,2 to M52 Ч 4 — 5 стр.
DIN 357:2008-11
Действует
Machine nut taps for coarse pitch metric ISO-threads M3 to M68 — 6 стр.
DIN 357:1998-07
Отменен
Machine nut taps for coarse pitch metric ISO-threads M3 to M68 — 4 стр.
DIN 352:2008-11
Отменен
Sets of taps - Sets of 3 taps for metric coarse ISO-threads M1 to M68 — 7 стр.
DIN 352:1998-09
Отменен
Sets of 3 taps for metric coarse ISO-threads M1 to M68 — 6 стр.
DIN 371:1998-07
Отменен
Machine taps with reinforced shank for coarse pitch metric ISO-threads M1 to M10 and fine pitch metric ISO-threads M1 Ч 0,2 to M10 Ч 1,25 — 7 стр.
DIN 802-6:2003-07
Действует
Manufacturing to tolerances on the threaded portion of screwing taps - Part 6: Ground taps for tapped holes (EG) for wire thread inserts as in DIN 8140 for ISO metric coarse and fine pitch threads — 10 стр.
DIN 374:2008-11
Отменен
Machine screwing taps for fine pitch metric ISO-threads M3 × 0,2 to M52 × 4 — 6 стр.
DIN 802-3:2008-11
Отменен
Tolerances on the threaded portion of taps - Part 3: Ground taps for pipe thread (G) according to DIN EN ISO 228-1 and pipe thread (Rp) according to DIN EN 10226-1 - Manufacturing tolerances on the threaded portion — 11 стр.
DIN 371:2008-11
Отменен
Machine taps with reinforced shank for coarse pitch metric ISO-threads M1 to M10 and fine pitch metric ISO-threads M1 × 0,2 to M10 × 1,25 — 9 стр.
DIN 802-5:1997-02
Действует
Tolerances on the threaded portion of tape - Part 5: Ground threaded taps for ISO metric thread; threads for interference fits according to DIN 8141-1, coarse and fine pitches; manufacturing tolerances on the threaded portion — 6 стр.
DIN 376:1998-07
Отменен
Machine screwing taps for coarse pitch metric ISO-thread M3 to M68 — 4 стр.