BS EN 60947-4-3. Low-voltage switchgear and controlgear. Part 4-3. Contactors and motor-starters. Semiconductor controllers and semiconductor contactors for non-motor loads— 48 стр.
Vehicles, boats and internal combustion engines - Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers— 160 стр.
BS EN 55016-1-1. Specification for radio disturbance and immunity measuring apparatus and methods. Part 1-1. Radio disturbance and immunity measuring apparatus. Measuring apparatus— 98 стр.
BS EN 60947-4-3. Low-voltage switchgear and controlgear. Part 4-3. Contactors and motor-starters. Semiconductor controllers and semiconductor contactors for non-motor loads— 48 стр.
Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests (IEC 61000-4-13:2002 + A1:2009) (english version)
Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) (IEC 61000-3-2:2014) (english version)
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration (CISPR 16-1-6:2014) (english version)
Electromagnetic Compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 61000-4-16:1998 + A1:2001 + A2:2009) (english version)
Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 1: General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA), and semi analytic model (SAM) (english version)
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement (CISPR 13:2009, modified) (english version)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Specifications and validation procedures for CALTS and REFTS from 30 MHz to 1 000 MHz (CISPR 16-1-5:2003 + A1:2012) (english version)
Ecodesign for power drive systems, motor starters, power electronics & their driven applications - Part 2: Energy efficiency indicators for power drive systems and motor starters (english version)
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers (CISPR 25:2008) (english version)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications (IEC 61326-3-1:2008) (english version)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements (CISPR 16-2-3:2010 + A1:2010 + A2:2014) (english version)
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission (CISPR 14-1:2005 + A1:2008 Cor.:2009 + A2:2011) (english version)
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment (IEC 61326-3-2:2008) (english version)
Wind turbines - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines (IEC 61400-21:2008) (english version)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements (CISPR 16-1-4:2010 + Cor.1:2010 + A1:2012) (english version)
Road vehicles - Vehicle to grid communication interface - Part 1: General information and use-case definition (ISO 15118-1:2013; corrected version 2013-10-01)
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-4: Radio disturbance and immunity measuring apparatus Antennas and test sites for radiated disturbance measurements (CISPR 16-1-4:2010 + Cor.1:2010 + A1:2012 + A2:2017) (english version)
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements (CISPR 16-2-3:2016) (english version)
Electromagnetic compatibility (EMC) -- Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems (IEC 61000-2-2:2002 + A1:2017) (english version)
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (CISPR 15:2013 + IS1:2013 + IS2:2013 + A1:2015) (english version)
Self-ballasted LED lamps for general lighting services with supply voltages > 50 V - Performance requirements (IEC 62612:2013 + A1:2015 + COR1:2016) (english version)
Radiation protection instrumentation - Backpack-type radiation detector (BRD) for the detection of illicit trafficking of radioactive material (english version)
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers (IEC/CISPR 12:2007 + A1:2009) (english version)
Ecodesign for power drive systems, motor starters, power electronics and their driven applications -- Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations (english version)
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase (IEC 61000-4-34:2005 + A1:2009 + Cor.:2009) (english version)
Effects of electromagnetic interference on pipelines caused by high voltage a.c. electric traction systems and/or high voltage a.c. power supply systems (english version)
Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement (CISPR 20:2006) (english version)
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test (IEC 61000-4-8:2009) (english version)
Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems (IEC 61000-4-25:2001 + A1:2012) (english version)
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances (english version)
Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (IEC 61000-4-7:2002 + A1:2008) (english version)
Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for fixed radio links and ancillary equipment
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment (IEC 61326-3-2:2017) (english version)
Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <=16 A per phase) (IEC 61000-3-2:2018) (english version)
Adjustable speed electrical power drive systems -- Part 5-1: Safety requirements - Electrical, thermal and energy (IEC 61800-5-1:2007 + A1:2016) (english version)
Electromagnetic Compatibility (EMC) -- Part 4-39: Testing and measurement techniques - Radiated fields in close proximity - Immunity test (IEC 61000-4-39:2017) (english version)
Adjustable speed electrical power drive systems -- Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA) and semi analytic model (SAM) (IEC 61800-9-1:2017) (english version)
Adjustable speed electrical power drive systems -- Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters (IEC 61800-9-2:2017) (english version)
Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications (IEC 61326-3-1:2017) (english version)
Electromagnetic compatibility (EMC) -- Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena (IEC 61000-1-2:2016) (english version)
Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system -- Part 1: Track circuits (english version)
