Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыISO

ISO 10763:1994

Действует
Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures — 8 стр.
ОписаниеИзмененияСсылкиВерсии

На этот документ ссылаются

BS ISO 17165-1:2007
Действует
Hydraulic fluid power. Hose assemblies. Dimensions and requirements — 34 стр.
BS ISO 6162-2:2012
Заменен
Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws. Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 — 30 стр.
BS ISO 6162-2:2018
Действует
Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws. Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 — 30 стр.
BS EN ISO 4413:2010
Действует
Hydraulic fluid power. General rules and safety requirements for systems and their components (CD-ROM)
BS ISO 8434-6:2009
Действует
Metallic tube connections for fluid power and general use. 60$0D cone connectors with or without O-ring — 52 стр.
BS ISO 8434-2:2007
Действует
Metallic tube connections for fluid power and general use. 37$0D flared connectors — 60 стр.
BS ISO 6164:2018
Действует
Hydraulic fluid power. Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80 — 22 стр.
BS ISO 6162-1:2012
Действует
Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws. Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 — 30 стр.
BS EN ISO 8434-1:2018
Действует
Metallic tube connections for fluid power and general use. 24$0D cone connectors — 60 стр.
ÖNORM EN ISO 19879:2021-07
Действует
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
ÖNORM EN ISO 4413:2011-04
Действует
Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
SAE J2658_201003
Заменен
Carbon and Steel Alloy Tube Conductor Assemblies for Fluid Power and General Use - Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies
SAE J2337/2_200210
Заменен
Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs With Iso 261 Threads and O-Rings Sealing - Part 2: Stud End Requirements, Dimensions, Design and Test Methods
SAE J1453/3_200702
Заменен
Specification for O-Ring Face Seal Connectors: Part 3 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Connectors, Caps, and Connectors with SAE J1926-2 Inch Stud Ends
SAE J2658_201003
Заменен
Carbon and Steel Alloy Tube Conductor Assemblies for Fluid Power and General Use—Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies
SAE J1453/3_200702
Заменен
Specification for O-Ring Face Seal Connectors: Part 3—Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Connectors, Caps, and Connectors with SAE J1926-2 Inch Stud Ends
SAE J2337/2_200210
Заменен
Connections for Fluid Power and High Pressure Use – Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing—Part 2: Stud End Requirements, Dimensions, Design, and Test Methods
SAE J518/1_202303
Действует
Hydraulic Flange Tube, Pipe, and Hose Connections Four-Screw Flange Connection - Part 1: 3.5 to 35 MPa (Code 61)
SAE J1453/3_200908
Заменен
Specification for O-Ring Face Seal Connectors: Part 3—Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Connectors, Caps, and Connectors with SAE J1926-2 Inch Stud Ends
SAE J2337/2_201702
Действует
Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 2: Stud End Requirements, Dimensions, Design, and Test Methods (Stabilized: Feb 2017)
SAE J518/2_202312
Действует
Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Screw Flange Connection - Part 2: 42 MPa (Code 62)
SAE J2435_199904
Заменен
Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized for Bending, Double Flaring, and Beading
SAE J526_202209
Действует
Welded Low-Carbon Steel Tubing Suitable for Bending, Flaring, Beading, Forming, and Brazing
SAE J2658_200307
Заменен
Metallic Tube Conductor Assemblies for Fluid Power and General Use—Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies
SAE J2467_202005
Действует
Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized for Bending, Single Flaring, Cold Forming, Welding, and Brazing
SAE J2467_201506
Заменен
Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized for Bending and Flaring
SAE J356_200607
Заменен
Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading
SAE J2551/1_201804
Действует
Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 1: Design and Fabrication
SAE J533_199608
Заменен
FLARES FOR TUBING
SAE J2551_200112
Заменен
Recommended Practices for Fluid Conductor Metallic Tubing Applications
SAE J2613_201710
Действует
Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Hydraulic Tubing, for Bending, Double Flaring, Cold Forming, Welding, and Brazing
SAE J524_199602
Заменен
SEAMLESS LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
SAE J2614_201801
Действует
Welded and Cold-Drawn, High Strength (500 MPa Tensile Strength) Hydraulic Tubing, for Bending, Flaring, Cold Forming, Welding and Brazing
SAE J356_199602
Заменен
WELDED FLASH CONTROLLED LOW-CARBON STEEL TUBING NORMALIZED FOR BENDING, DOUBLE FLARING, AND BEADING
SAE J2551/3_202003
Действует
Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement
SAE J1677_201612
Заменен
Tests and Procedures for Carbon Steel and High Strength Low Alloy Steel Tubing
SAE J1065_202207
Действует
Nominal Reference Working Pressures for Steel Hydraulic Tubing
SAE J2435_202006
Действует
Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized for Bending, Double Flaring, Cold Forming, Welding, and Brazing
SAE J1677_199601
Заменен
TESTS AND PROCEDURES FOR SAE LOW-CARBON STEEL AND COPPER NICKEL TUBING
SAE J526_199602
Заменен
WELDED LOW-CARBON STEEL TUBING
SAE J2833_201806
Действует
Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending, Flaring, Cold Forming and Brazing
SAE J356_201905
Действует
Welded, Flash-Controlled, Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, Beading, Forming, and Brazing
SAE J1065_199507
Заменен
PRESSURE RATINGS FOR HYDRAULIC TUBING AND FITTINGS
SAE J1065_200302
Заменен
Nominal Reference Working Pressures for Steel Hydraulic Tubing
SAE J2551/2_201804
Действует
Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements
SAE J526_201611
Заменен
Welded Low-Carbon Steel Tubing Suitable for Bending, Flaring, Beading, Forming and Brazing
SAE J2467_199904
Заменен
Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized for Bending and Flaring
SAE J2551_201005
Заменен
Recommended Practices for Fluid Conductor Carbon and Alloy Steel Tubing Applications
SAE J1677_202209
Действует
Tests and Procedures for Carbon Steel and High Strength, Low Alloy Steel Tubing
SAE J1065_201605
Заменен
Nominal Reference Working Pressures for Steel Hydraulic Tubing
SAE J1677_200402
Заменен
Tests and Procedures for Steel and Copper Nickel Tubing
SAE J2551/3_201804
Заменен
Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement
SAE J2614_200301
Заменен
Welded and Cold-Drawn, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending and Flaring
SAE J2613_200210
Заменен
Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending
SAE J2593_200410
Заменен
Information Report for the Installation of Fluid Conductors and Connectors
SAE J2435_201508
Заменен
Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized for Cold Forming, Welding and Brazing
SAE J2832_201902
Действует
Welded Flash Controlled, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved, Annealed for Bending, Double Flaring, Cold Forming, and Brazing
SAE J518/2_201704
Заменен
Hydraulic Flanged Tube, Pipe, and Hose Connections, 4-Screw Flange Connection Part 2: 42 MPa (Code 62)