Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыISO

ISO 6162-2:2018

Действует
Hydraulic fluid power -- Flange connections with split or one-piece flange clamps and metric or inch screws -- Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 — 28 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

ISO 6162-2:2012
Заменен
Hydraulic fluid power -- Flange connections with split or one-piece flange clamps and metric or inch screws -- Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 — 28 стр.

На этот документ ссылаются

BS EN ISO 19879:2010
Действует
Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections — 30 стр.
BS ISO 10946:1999
Действует
Hydraulic fluid power. Gas-loaded accumulators with separator. Selection of preferred hydraulic ports — 12 стр.
PD ISO/TS 17165-2:2013
Заменен
Hydraulic fluid power. Hose assemblies. Practices for hydraulic hose assemblies — 26 стр.
ISO 6162-2:2012
Заменен
Hydraulic fluid power -- Flange connections with split or one-piece flange clamps and metric or inch screws -- Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 — 28 стр.
BS EN ISO 4413:2010
Действует
Hydraulic fluid power. General rules and safety requirements for systems and their components (CD-ROM)
BS ISO 6164:2018
Действует
Hydraulic fluid power. Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80 — 22 стр.
BS ISO 12151-3:2010
Действует
Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends — 22 стр.
PD ISO/TS 11672:2016
Действует
Connectors for fluid power and general use. Designation and nomenclature — 22 стр.
BS 7504:1995
Заменен
Hydraulic fluid power. Four-screw, one-piece square flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) — 16 стр.
ÖNORM EN ISO 4413:2011-04
Действует
Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
SAE J1475_199606
Заменен
Hydraulic Hose Fittings for Marine Applications
SAE J1475_199606
Заменен
HYDRAULIC HOSE FITTING FOR MARINE APPLICATIONS
SAE J1475_200402
Заменен
Hydraulic Hose Fitting for Marine Applications
SAE J1475_201406
Действует
Hydraulic Hose Fitting for Marine Applications (Stabilized: Jun 2014)
SAE J518/1_202303
Действует
Hydraulic Flange Tube, Pipe, and Hose Connections Four-Screw Flange Connection - Part 1: 3.5 to 35 MPa (Code 61)
SAE J1298_200805
Заменен
Connections for Fluid Power and General Use—Hydraulic Couplings—Diagnostic Port Sizes and Locations
SAE J1298_199704
Заменен
CONNECTIONS FOR FLUID POWER AND GENERAL USE—HYDRAULIC COUPLINGS—DIAGNOSTIC PORT SIZES AND LOCATIONS
SAE J515_202205
Действует
Specification for O-Ring Materials Used with Hydraulic Connectors
SAE J515_200112
Заменен
Specification for Hydraulic O-Ring Materials, Properties, and Sizes for Metric and Inch Stud Ends, Face Seal Fitting and Four-Screw Flange Tube Connections
SAE J1298_201704
Действует
Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic Port Sizes and Locations (Stabilized: Apr 2017)
SAE J515_199701
Заменен
SPECIFICATION FOR HYDRAULIC O-RING MATERIALS, PROPERTIES, AND SIZES FOR METRIC AND INCH STUD ENDS, FACE SEAL FITTING AND FOUR-SCREW FLANGE TUBE CONNECTIONS
SAE J518/2_202312
Действует
Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Screw Flange Connection - Part 2: 42 MPa (Code 62)
SAE J846_200401
Заменен
Coding Systems for Identification of Fluid Conductors and Connectors
SAE J846_200904
Заменен
Coding Systems for Identification of Fluid Conductors and Connectors
SAE J846_200712
Заменен
Coding Systems for Identification of Fluid Conductors and Connectors
SAE J846_201511
Заменен
Coding Systems for Identification of Fluid Conductors and Connectors
SAE J846_202303
Действует
Coding Systems for Identification of Fluid Conductors and Connectors
SAE J846_202009
Заменен
Coding Systems for Identification of Fluid Conductors and Connectors
SAE J516_200507
Заменен
Hydraulic Hose Fittings
SAE J2658_200307
Заменен
Metallic Tube Conductor Assemblies for Fluid Power and General Use—Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies
SAE J2551/1_201804
Действует
Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 1: Design and Fabrication
SAE J2551_200112
Заменен
Recommended Practices for Fluid Conductor Metallic Tubing Applications
SAE J2613_201710
Действует
Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Hydraulic Tubing, for Bending, Double Flaring, Cold Forming, Welding, and Brazing
SAE J2614_201801
Действует
Welded and Cold-Drawn, High Strength (500 MPa Tensile Strength) Hydraulic Tubing, for Bending, Flaring, Cold Forming, Welding and Brazing
SAE J2551/3_202003
Действует
Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement
SAE J1065_202207
Действует
Nominal Reference Working Pressures for Steel Hydraulic Tubing
SAE J2833_201806
Действует
Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending, Flaring, Cold Forming and Brazing
SAE J1065_200302
Заменен
Nominal Reference Working Pressures for Steel Hydraulic Tubing
SAE J2551/2_201804
Действует
Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements
SAE J2551_201005
Заменен
Recommended Practices for Fluid Conductor Carbon and Alloy Steel Tubing Applications
SAE J1065_201605
Заменен
Nominal Reference Working Pressures for Steel Hydraulic Tubing
SAE J515_201511
Заменен
Specification for O-Ring Materials Used with Hydraulic Connectors
SAE J2551/3_201804
Заменен
Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement
SAE J2614_200301
Заменен
Welded and Cold-Drawn, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending and Flaring
SAE J2613_200210
Заменен
Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending
SAE J2593_200410
Заменен
Information Report for the Installation of Fluid Conductors and Connectors
SAE J2832_201902
Действует
Welded Flash Controlled, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved, Annealed for Bending, Double Flaring, Cold Forming, and Brazing
SAE J518/2_201704
Заменен
Hydraulic Flanged Tube, Pipe, and Hose Connections, 4-Screw Flange Connection Part 2: 42 MPa (Code 62)