Краткое описание

THIS PRODUCT HAS BEEN REPLACED BY FIRE07.

Содержание

ASTM Fire Test Standards, 5th Edition
Table of Contents

C 411-97 Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation

C 509-94 Specification for Elastomeric Cellular Preformed Gasket and Sealing Material

C 518-98 Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

C 542-94 Specification for Lock-Strip Gaskets

C 739-97 Specification for Cellulosic Fiber (Wood-Base) Loose-Fill Thermal Insulation

C 745-92 Test Method for Heat Flux Through Evacuated Insulations Using a Guarded Flat Plate Boiloff Calorimeter

C 800-94 Specification for Glass Fiber Blanket Insulation (Aircraft Type)

C 864-98 Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

C 1046-95 Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components

C 1055-92 Guide for Heated System Surface Conditions That Produce Contact Burn Injuries

C 1057-92 (1998)el Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer

C 1071-98 Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)

C 1166-91 (1995) Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories

D 56-97a Test Method for Flash Point by Tag Closed Tester

D 92-97 Test Method for Flash and Fire Points by Cleveland Open Cup

D 93-97 Test Methods for Flash Point by Pensky-Martens Closed Tester

D 187-94 Test Method for Burning Quality of Kerosine

D 229-96 Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation

D 240-92 (1997)el Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

D 350-96 Test Methods for Flexible Treated Sleeving Used for Electrical Insulation

D 378-91 Test Methods for Rubber Belting, Flat Type

D 461-93 Test Methods for Felt

D 470-93 Test Methods for Crosslinked Insulations and Jackets Wire and Cable

D 635-98 Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position

D 777-97 Test Methods for Flammability of Treated Paper and Paperboard

D 876-95a Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation

D 1000-93 Test Method for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Insulations

D 1230-94 Test Method for Flammability of Apparel Textiles

D 1310-86 (1997)el Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus

D 1322-97 Test Method for Smoke Point of Kerosine and Aviation Turbine Fuels

D 1360-98 Test Method for Fire Retardancy of Paints (Cabinet Method)

D 1405-95a Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D 1867-96 Specification for Copper-Clad Thermosetting Laminates for Printed Wiring

D 1903-96 Test Method for Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin, and Askarels

D 1929-96 Test Method for Determining Ignition Temperature of Plastics

D 1989-97 Test Method for Gross Calorific Value of Coal and Coke by Microprocessor Controlled Isoperibol Calorimeters

D 2015-96 Test Method for Gross Calorific Value of Coal and Coke by the Adiabatic Bomb Calorimeter

D 2304-97 Test Method for Thermal Endurance of Rigid Electrical Insulating Materials

D 2485-91 (1996) Test Methods for Evaluating Coatings for High Temperature Service

D 2584-94 Test Method for Ignition Loss of Cured Reinforced Resins

D 2633-96 Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable

D 2671-98 Test Methods for Heat-Shrinkable Tubing for Electrical Use

D 2766-95 Test Method for Specific Heat of Liquids and Solids

D 2843-93 Test Method for Density of Smoke from the Burning or Decomposition of Plastics

D 2859-96 Test Method for Flammability of Finished Textile Floor Covering Materials

D 2863-97 Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

D 2883-95 Test Method for Reaction Threshold Temperature of Liquid and Solid Materials

D 2898-94el Test Methods for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing

D 2939-98 Test Methods of Testing Emulsified Bitumens Used as Protective Coatings

D 3014-94 Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position

D 3032-98 Test Methods for Hookup Wire Insulation

D 3065-94 Test Methods for Flammability of Aerosol Products

D 3115-95 Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear

D 3143-98 Test Method for Flashpoint of Cutback Asphalt with Tag Open-Cup Apparatus

D 3144-95 Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation

D 3278-96el Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus

D 3286-96 Test Method for Gross Calorific Value of Coal and Coke by the Isoperibol Bomb Calorimeter

D 3338-95 Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D 3466-76 (1998) Test Method for Ignition Temperature of Granular Activated Carbon

D 3523-92 (1997) Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)

D 3574-95 Test Methods for Flexible Cellular Materials--Slab, Bonded, and Molded Urethane Foams

D 3659-80 (1993)el Test Method for Flammability of Apparel Fabrics by Semi-Restraint Method

D 3675-98 Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

D 3713-95 Test Method for Measuring Response of Solid Plastics to Ignition by a Small Flame

D 3801-96el Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

D 3806-98 Test Method for Small-Scale Evaluation of Fire-Retardant Paints (2-foot Tunnel Method)

D 3814-97 Guide for Locating Combustion Test Methods for Polymeric Materials

D 3828-97 Test Methods for Flash Point by Small Scale Closed Tester

D 3874-97 Test Method for Ignition of Materials by Hot Wire Sources

D 3934-90 (1996)el Test Method for Flash/No Flash Test--Equilibrium Method by a Closed-Cup Apparatus

D 3941-90 (1996)el Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus

D 4151-92 Test Method for Flammability of Blankets

D 4206-96 Test Method for Sustained Burning of Liquid Mixtures by the Small Scale Open-Cup Apparatus

D 4372-93 Specification for Flame-Resistant Materials Used in Camping Tentage

D 4391-93a Terminology Relating to the Burning Behavior of Textiles

D 4529-95 Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D 4723-90 (1993)el Index of and Descriptions of Textile Heat and Flammability Test Methods and Performance Specifications

D 4804-98 Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

D 4809-95 Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)

D 4982-95 Test Methods for Flammability Potential Screening Analysis of Waste

D 4986-95 Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials

D 5024-95a Test Method for Measuring the Dynamic Mechanical Properties of Plastics in Compression

D 5025-94 Specification for A Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials

D 5048-97 Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame

D 5132-93 (1994)el Test Method for Horizontal Burning Rate of Flexible Cellular and Rubber Materials Used in Occupant Compartments of Motor Vehicles

D 5207-98 Practice for Confirmation of 20- and 125-mm Test Flames for Small-Scale Burning Tests on Plastic Materials

D 5238-98 Test Method for Smoldering Combustion Potential of Cotton-Based Batting

D 5306-92 (1997) Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids

D 5364-93el Guide for Design, Fabrication and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units

D 5424-97 Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

D 5425-96 Guide for Development of Fire Hazard Assessment Standards for Electrotechnical Products

D 5485-94a Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter

D 5516-96 Test Method for Evaluating the Flexural Properties of Fire Retardant Treated Softwood Plywood Exposed to Elevated Temperatures

D 5537-97 Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

D 5664-95el Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber

D 6113-97 Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

D 6194-97 Test Method for Glow-Wire Ignition of Materials

E 69-95a Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus

E 84-98el Test Method for Surface Burning Characteristics of Building Materials

E 108-96 Test Methods for Fire Tests of Roof Coverings

E 119-98 Test Methods for Fire Tests of Building Construction and Materials

E 136-98el Test Method for Behavior of Materials in a Vertical Tube Furnace at 750EC

E 144-94 (1995) Practice for Safe Use of Oxygen Combustion Bombs

E 162-98 Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source

E 176-98 Terminology of Fire

E 205-96 Specification for Glass and Oxygen Combustion Flask

E 285-80 (1996)el Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials

E 487-79 (1992) Test Method for Constant-Temperature Stability of Chemical Materials

E 502-84 (1994) Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods

E 535-93a Practice for Preparation of Fire-Test-Response Standards

E 537-98 Practice for Assessing the Thermal Stability of Chemicals by Methods of Thermal Analysis

E 582-88 (1993) Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures

E 603-98 Guide for Room Fire Experiments

E 648-97el Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source

E 659-78 (1994)el Test Method for Autoignition Temperature of Liquid Chemicals

E 662-97 Test Method for Specific Optical Density of Smoke Generated by Solid Materials

E 681-98 Test Method for Concentration Limits of Flammability of Chemicals

E 691-92 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

E 771-90 (1996) Test Method for Spontaneous Heating Tendency of Materials

E 800-95 Guide for Measurement of Gases Present or Generated During Fires

E 814-97 Test Method for Fire Tests of Through-Penetration Fire Stops

E 906-98 Test Method for Heat and Visible Smoke Release Rates for Materials and Products

E 918-83 (1993) Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure

E 970-98 Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

E 1232-91 (1996) Test Method for Temperature Limit of Flammability of Chemicals

E 1269-95 Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry

E 1317-97a Test Method for Flammability of Marine Surface Finishes

E 1321-97a Test Method for Determining Material Ignition and Flame Spread Properties

E 1352-98a Test Method for Cigarette Ignition Resistance of Mock-Upholstered Furniture Assemblies

E 1353-98a Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture

E 1354-97 Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

E 1355-97 Guide for Evaluating the Predictive Capability of Deterministic Fire Models

E 1385-95 Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Steam Distillation

E 1386-95 Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction

E 1387-95 Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography

E 1388-95 Practice for Sampling of Headspace Vapors from Fire Debris Samples

E 1389-95 Practice for Cleanup of Fire Debris Sample Extracts by Acid Stripping

E 1412-95 Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration

E 1445-91 Terminology Relating to Hazardous Potential of Chemicals

E 1461-92 Test Method for Thermal Diffusivity of Solids by the Flash Method

E 1472-92 (1998) Guide for Documenting Software for Fire Models

E 1474-96a Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter

E 1491-97 Test Method for Minimum Autoignition Temperature of Dust Clouds

E 1515-96 Test Method for Minimum Explosible Concentration of Combustible Dusts

E 1529-93 Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies

E 1537-98el Test Method for Fire Testing of Upholstered Seating Furniture

E 1546-93 Guide for Development of Fire Hazard Assessment Standards

E 1590-96el Test Method for Fire Testing of Mattresses

E 1591-94 Guide for Data for Fire Models

E 1623-94 Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)

E 1678-97 Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis

E 1725-95 Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components

E 1740-95 Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter

E 1776-96 Guide for Development of Fire-Risk-Assessment Standards

E 1822-98el Test Method for Fire Testing of Stacked Chairs

E 1895-97 Guide for Determining Uses and Limitations of Deterministic Fire Models

E 1966-98 Test Method for Fire-Resistive Joint Systems

F 400-97 Consumer Safety Specification for Lighters

F 495-88 (1993) Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures

F 1358-95 Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance

F 1384-93 Test Method for Fire Tests of Marine Joiner Doors

F 1387-93 (1998) Specification for Performance of Mechanically-Attached Fittings

F 1449-92 Guide for Care and Maintenance of Flame Resistance and Thermal Protective Clothing

F 1506-98 Test Method for Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards

F 1534-96 Test Method for Determining Changes in Fire-Test-Response Characteristics o Cushioning Materials After Water Leaching

F 1550-96a Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter

G 72-82 (1996)el Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment

G 74-82 (1996)el Test Method for Ignition Sensitivity of Materials to Gaseous Fluid Impact

G 94-92 (1998) Guide for Evaluating Materials for Oxygen Service

Provisional Standard:

PS 57-97 Test Method for Determining Ignitability of Clothing by Electric Arc Exposure Method Using a Mannequin

ASTM Discontinued Standards:

D 52-62 (1981) Specification for Wood Paving Blocks for Exposed Platforms, Pavements, Driveways, and Interior Floors Exposed to Wet and Dry Conditions (Discontinued 1995)

D 568-77 (1985) Test Method for Rate of Burning and/or Extent and Time of Burning of Flexible Plastics in a Vertical Position (Discontinued 1991)

D 2382-88 Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) (Discontinued 1994--Replaced by D 4809)

D 2554-81 (1989) Test Method for Flash Point of Drycleaning Detergents in the Drycleaning Bath (Discontinued 1992)

D 3770-91 Specification for Flexible Cellular Materials--High Resilience Polyurethane Foam (HR) and Combustion Modified High Resilience (CMHR) Polyurethane Foam (Discontinued 1998)

D 3894-88 Test Method for Evaluation of Fire Response of Rigid Cellular Plastics Using a Small Corner Configuration (Discontinued 1994)

D 3947-92 Test Method for Specific Heat of Aircraft Turbine Lubricants by Thermal Analysis (Discontinued 1997--Replaced by E 1269)

D 4100-82 (1989) Test Method for Gravimetric Determination of Smoke Particulates from Combustion of Plastic Materials (Discontinued 1997)

D 4108-87 Test Method for Thermal Protective Performance of Materials for Clothing by Open-Flame Method (Discontinued 1995)

D 4205-93 (1994)el Guide for Flammability and Combustion Testing of Rubber and Rubber-Like Materials (Discontinued 1997--Replaced by D 3814)

D 4207-91 Test Method for the Sustained Burning of Low-Viscosity Mixtures by the Wick Test (Discontinued 1998)

D 4433-84 (1989) Specification for Flame-Resistant Treated Paper and Paperboard (Discontinued 1996)

E 152-81ae2 Test Methods of Fire Tests of Door Assemblies (Discontinued 1995)

E 160-80 Test Method for Combustible Properties of Treated Wood by the Crib Test (Discontinued 1993)

E 163-84el Test Methods of Fire Tests of Window Assemblies (Discontinued 1995)

E 286-85 Test Method for Surface Flammability of Building Materials Using an 8-ft (2.44-m) Tunnel Furnace (Discontinued 1991)

E 931-94 Practice for Assessment of fire Risk by Occupancy Classification (Discontinued 1996)

F 501-93 Test Method for Aerospace Materials Response to Flame, with Vertical Test Specimen (for Aerospace Vehicles, Conditions) (Discontinued 1998)

F 776-87 Test Method for Resistance of Materials to Horizontal Flame Propagation (for Aerospace Vehicles, Conditions) (Discontinued 1996)

F 777-89 Test Method for Resistance of Electrical Wire Insulation to Flame at 60 (Discontinued 1997--Replaced by D 3032)

F 814-84b Test Method for Specific Optical Density of Smoke Generated by Solid Materials for Aerospace Applications (Discontinued 1997--Replaced by D 3032)

F 828-83 Test Method for Radiant Heat Resistance of Aircraft Inflatable Evacuation Slide/Slide Raft Materials (Discontinued 1995)

F 1103-93 Test Method for Materials Response to Flame--45°(for Aerospace Vehicles) (Discontinued 1998)