Краткое описание

THIS PRODUCT HAS BEEN REPLACED BY FASTENER08.

Содержание
ASTM International Standards for Mechanical Fasteners and Related Standards for Fastener Materials, Coatings, Test Methods, and Quality

Table of Contents

A 29 / A 29M Specification for Steel Bars, Carbon and Alloy, Hot Wrought and Cold Finished

A 31 Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

A 36/A 36M Specification for Carbon Structural Steel

A 47 / A 47M Specification for Ferritic Malleable Iron Castings

A 90 / A 90M Test Method for Weight of Coating on Zinc-Coated (Galvanized) Iron or Steel Articles

A 153 / A 153M Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

A 183 Specification for Carbon Steel Track Bolts and Nuts

A 193 / A 193M Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

A 194 / A 194M Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure and

High-Temperature Service

A 220 / A 220M Specification for Pearlitic Malleable Iron

A 242 / A 242M Specification for High-Strength Low-Alloy Structural Steel

A 262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

A 276 Specification for Stainless Steel Bars and Shapes

A 307 Specification for Carbon Steel Bolts and Studs, 60 000 psi Tensile Strength

A 320 / A 320M Specification for Alloy/Steel Bolting Materials for Low-Temperature Service

A 325 Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

A 325M Specification for Structural Bolts, Steel, Heat Treated, 830 Mpa Minimum Tensile Strength

A 342 / A 342M Test Methods for Permeability of Feebly Magnetic Materials

A 354 Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

A 370 Test Methods and Definitions for Mechanical Testing of Steel Products

A 380 Practice for Cleaning and Descaling Stainless Steel Parts, Equipment, and Systems

A 394 Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare

A 428 / A 428M Test Method for Weight of Coating on Aluminum-Coated Iron or Steel Articles

A 437 / A 437 Specification for Alloy/Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service

A 449 Specification for Quenched and Tempered Steel Bolts and Studs

A 453 / A 453M Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austinitic Stainless Steels

A 484/A 484M Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

A 489 Specification for Carbon Steel Lifting Eyes

A 490 Specification for Heat-Treated Steel Structural Bolts, 150 ksi Minimum Tensile Strength

A 490M Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints

A 493 Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging

A 502 Specification for Rivets, Steel, Structural

A 510 Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel

A 536 Specification for Ductile Iron Castings

A 540 / A 540M Specification for Alloy/Steel Bolting Materials for Special Applications

A 555/A 555M Specification for General Requirements for Stainless and Heat-Resisting Steel Wire and Wire Rods

A 563 / A 563 M Specification for Carbon and Alloy Steel Nuts

A 564/A 564M Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

A 568/A 568M Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

A 571 Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service

A 574 Specification for Alloy Steel Socket-Head Cap Screws

A 574M Specification for Alloy Steel Socket-Head Cap Screws [Metric]

A 582 / A 582M Specification for Free-Machining Stainless Steel Bars

A 588 / A 588M Specification for High-Strength Low-Alloy Structural Steel with 50 ksi (345 MPa) Minimum Yield Point to 4 in. (100 mm) Thick

A 615 / A 615 M Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement

A 641/A 641M Specification for Zinc-Coated (Galvanized) Carbon Steel Wire

A 673/A673M Specification for Sampling Procedure for Impact Testing of Structural Steel

A 706/A706M Specification for Low-Alloy Steel Deformed Bars for Concrete Reinforcement

A 709/A 709M Specification for Carbon and High Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched and Tempered Allow Structural Steel Plates for Bridges

A 751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

A 871 / A 871M Specification for High-Strength Low Alloy Structural Steel Plate with Atmospheric Corrosion Resistance

A 962 / A 962M Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range

A 967 Specification for Chemical Passivation Treatments for Stainless Steel Parts

A 1014 Specifiation for Precipatation-Harding Bolting Material (UNS N07718) for High Temperature Service

B 6 Specification for Zinc (Slab Zinc)

B 117 Practice for Operating Salt Spray (Fog) Apparatus

B 154 Test Method for Mercurous Nitrate Test for Copper and Copper Alloys

B 193 Test Method for Resistivity of Electrical Conductor Materials

B 211 / B 211M Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire

B 244 Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments

B 487 Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section

B 499 Test Method for Measurement of Coating Thickness by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals

B 504 Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method

B 565 Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods

B 567 Test Method for Measurement of Coating Thickness by the Beta Backscatter Method

B 568 Test Method for Measurement of Coating Thickness by X-Ray Spectrometry

B 633 Specification for Electrodeposited Coatings of Zinc on Iron and Steel

B 659 Guide for Measuring Thickness of Metallic and Inorganic Coatings

B 695 Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel

B 696 Specification for Coatings of Cadmium Mechanically Deposited

B 766 Specification for Electrodeposited Coatings of Cadmium

B 840 Specification for Electrodeposited Coatings of Zinc Cobalt Alloy Deposits

B 841 Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits

B 842 Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits

C 514 Specification for Nails for the Application of Gyp-sum Board

D 1000 Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications

D 1186 Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base

D 1193 Specification for Reagent Water

D 1248 Specification for Polyethylene Plastics Molding and Extrusion Material

D 1761 Test Methods for Mechanical Fasteners in Wood 4 E 18 Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials

D 2247 Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity

D 3359 Test Method for Measuring Adhesion by Tape Test

D 3951 Practice for Commercial Packaging

E 3 Method of Preparation of Metallographic Specimens

E 4 Practices for Force Verification of Testing Machines

E 8 / E 8M Test Methods for Tension Testing of Metallic Materials

E 8M Test Methods for Tension Testing of Metallic Materials [Metric]

E 10 Test Method for Brinell Hardness of Metallic Materials

E 18 Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials

E 29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

E 34 Test Methods for Chemical Analysis of Aluminum and Aluminum Base Alloys

E 53 Test Methods for Chemical Analysis of Copper

E 55 Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

E 62 Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)

E 75 Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys

E 76 Test Methods for Chemical Analysis of Nickel-Copper Alloys

E 83 Practice for Verification and Classification of Extensometers

E 92 Test Method for Vickers Hardness Metallic Materials

E 112 Test Methods for Determining Average Grain Size

E 120 Test Methods for Chemical Analysis of Titanium and Titanium Alloys

E 122 Practice for Choice of Sample Size to Estimate a Measure of Quality for a Lot or Process

E 177 Practice for Use of the Terms Precision and Bias in ASTM Test Methods

E 340 Test Method for Macroetching Metals and Alloys

E 353 Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel- Iron Alloys

E 354 Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

E 376 Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Test Methods

E 399 Test Method for Plane-Strain Fracture Toughness of Metallic Materials

E 456 Terminology Relating to Quality and Statistics

E 478 Test Methods for Chemical Analysis of Copper Alloys

E 691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

E 709 Guide for Magnetic Particle Examination

E 831 Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis

E 1409 Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique

E 1823 Terminology Related to Fatigue and Fracture Testing

F 432 Specification for Roof and Rock Bolts and Accessories

F 436 / F 436M Specification for Hardened Steel Washers

F 467 / F 467M Specification for Nonferrous Nuts for General Use

F 468 / F 468M Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use

F 519 Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating Processes and Service Environments

F 541 Specification for Alloy Steel Eyebolts

F 547 Terminology of Nails for Use with Wood and Wood-Base Materials

F 568 Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners

F 592 Terminology of Collated and Cohered Fasteners and Their Application Tools

F 593 Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

F 594 Specification for Stainless Steel Nuts

F 606 / F 606M Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets

F 680 Test Methods for Nails

F 738M Specification for Stainless Steel Metric Bolts, Screws, and Studs

F 788 / F 788M Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

F 812 / F 812M Specification for Surface Discontinuities of Nuts, Inch and Metric Series

F 835 / F 835M Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

F 836M Specification for Style 1 Stainless Steel Metric Nuts

F 837 / F 837M Standard Specification for Stainless Steel Socket Head Cap Screws

F 844 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

F 879 / F 879M Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

F 880 / F 880M Standard Specification for Stainless Steel Socket Set Screws

F 901 Standard Specification for Aluminum Transmission Tower Bolts and Nuts

F 912 / F 912M Standard Specification for Alloy Steel Socket Set Screws

F 959 Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners

F 959M Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]

F 1077 Standard Guide for Selection of Committee F-16 Fastener Specifications

F 1135 Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners

F 1136 Standard Specification for Chromium/Zinc Corrosion Protective Coatings for Fasteners

F 1137 Specification for Phosphate/Oil and PhosphateOrganic Corrosion Protective Coatings for Fasteners

F 1428 Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners

F 1469 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing

F 1470 Guide for Fastener Sampling for Specific Mechanical Properties and Performance Inspection

F 1503 Standard Practice for Machine/Process Potential Study Procedure

F 1554 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

F 1575 Test Method for Determining Bending Yield Moment of Nails

F 1624 Test Method for Measurement of Hydrogen Embrittlement in Steel by the Incremental Loading Technique

F 1667 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples

F 1789 Standard Terminology of F16 Mechanical Fasteners

F 1852 Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

F 1940 Test Method for Precess Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

F 1941 Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))

F 1941M Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]

F 2281 Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

F 2282 Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for mechanical Fasteners

G 5 Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements

G 101 Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels