This document contains definitions, thread dimension, reference data (minimum bore), supporting information (assembling instructions) and describes the test methods referenced by other parts of the EN 1254 series.
Thread dimensions comprise: wall thickness at threaded portions of fittings, dimensions of tail pipe ends for swivel fittings, dimensions of gas union connectors, thread dimensions and thread profile.
Test methods comprise: leak tightness under internal hydrostatic pressure, leak tightness under internal pneumatic pressure, integrity of fabricated fitting bodies or having an 'as cast' microstructure, resistance to pull out of joints to metallic tubes, resistance of joints with metallic tube to vibration, resistance of joints to static flexural force, leak tightness of joints under vacuum, the resistance of joints to temperature cycling, detecting non-pressed fitting ends, resistance to stress corrosion, detection of a carbon film on the surface of copper fittings, determination of mean depth of dezincification, resistance of joints to pressure cycling, disconnection and re-use, determining if the diameter and/or the length of engagement of a capillary end is/are within the specified tolerance, determining the minimum length of engagement of an integral solder or brazing ring socket having a formed groove.
Dieses Dokument enthält Definitionen, Gewindemaße, Referenzdaten (Mindest-Durchgangsquerschnitt), hilfreiche Informationen (Montageanweisungen) und beschreibt die in anderen Teilen der Normenreihe EN 1254 zitierten Prüfverfahren.
Gewindemaße umfassen: Wanddicke an Gewindeteilen der Fittings, Maße der Endrohranschlüsse von Fittings mit Verschraubungsanschluss, Maße der Gas-Verschraubungsanschlüsse, Gewindemaße und Gewindeprofil.
Prüfverfahren umfassen: Dichtheit unter hydrostatischem Innendruck, Dichtheit unter pneumatischem Innendruck, Integrität der Fittingkörper mit Formgussgefüge bzw. der gefertigten Fittingkörper, Ausziehwiderstand von Verbindungen mit Metallrohren, Schwingungsbeständigkeit von Verbindungen mit Metallrohren, Beständigkeit von Verbindungen bei statischer Biegebeanspruchung, Vakuumdichtheit von Verbindungen, Temperaturwechselbeständigkeit von Verbindungen, Aufspüren unverpresster Fittings, Spannungsrisskorrosionsbeständigkeit, Auffinden eines Kohlenstoff-Films auf der Oberfläche von Kupferfittings, Bestimmung der mittleren Entzinkungstiefe, Druckwechselbeständigkeit von Verbindungen, Lösen und Wiederverwenden, Bestimmung, ob der Durchmesser und/oder die Lötlänge eines Kapillarendes innerhalb der festgelegten Grenzabweichungen liegen, und Bestimmung der Mindest-Lötlänge eines Innenlötendes mit integriertem Weich- bzw. Hartlötring mit ausgeformter Nut.