Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru

ÖNORM EN 300289 V 1.2.1:2001-11

Действует
Access and Terminals (AT) - 64 kbit/s digital unrestricted leased line with octet integrity (D64U) - Connection characteristics
The present document specifies the technical requirements and test principles for the connection characteristics of ONP
64 kbit/s digital unrestricted leased lines with octet integrity. The leased line provides access to the full digital bit rate of
64 kbit/s, with network timing for both directions of the transmission, with no restrictions on the binary content.
A connection is presented via interfaces at Network Termination Points (NTP) and includes any equipment that may
provide the NTP. Signals between terminal equipments are subject to impairments during their transfer over the
connection. The limits to these impairments are stated in the present document, and these limits apply only where the
terminal output signals are synchronous with the output of the leased line. Together with the companion standard,
EN 300 288 [2] defining the network interface presentation, the present document describes the service offered.
The tests specified in the present document cannot be carried out, nor can the performance be monitored by the leased
line provider, while the leased line is in service, i.e. carrying users traffic. Thus the tests are designed for bringing into
and returning into service, although there is no obligation to perform these tests each time a leased line is brought into
or returned into service.
The present document is applicable for leased lines, including part time leased lines, for which the establishment or
release does not require any protocol exchange or other intervention at the NTP.
The present document specifies the compliance tests for the connection requirements. The present document does not
include details concerning the implementation of the tests, nor does it include information on any relevant regulations.
The present document describes those characteristics of the connection that cannot be determined only by the
equipment providing the NTPs. The related standard, EN 300 28 (...abbreviated)
ICS
33.040.50 Lines,. Including access networks and network elements / Линии, соединения и цепи. Включая сети доступа и сетевые элементы