The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation extra Information
for Testing (PIXIT) proforma for the Network Termination Node (NTN) part at the T* or V1* reference points shown
in figure 2 of EN 301 141-1 [1]. The present document contains the ATS and partial PIXIT proforma for only the NTN
side.
EN 301 141-2 [2] specifies the Protocol Implementation Conformance Statement (PICS) proforma related to this ATS.
EN 301 141-4 [4] specifies the Test Suite Structure and Test Purposes (TSS&TP) related to this ATS and partial PIXIT
proforma specification.
An NMDS implementation may contain one ISDN-BA port and/or a limited number of PSTN ports up to a maximum of
10. Typically one or two PSTN ports would be supported.
The objective of the present document is to provide conformance tests giving a high probability of inter-operability of a
Network Termination Node (NTN) and a Local Exchange (LE) by testing the layer 3 aspects of an NTN from different
manufacturers over the NMDS interface. The present document covers only the procedures described in
EN 301 141-1 [1].
ISO/IEC 9646-1 [12] is used as the basis for the methodology of conformance testing.
EN 301 141-1 [1] defines the NMDS layer 3 functions in detail:
For the ISDN-BA.
For the PSTN functions. In this case, then bulk of the material shall come from EN 300 324-1 [5].