The present document specifies the technical requirements to be met by terminal equipment capable of connecting to a public telecommunications network. These requirements apply to terminals for Phase 2 of the public land mobile radio service, operating in:
the GSM 900 band; or
the DCS 1 800 band; or
both in the DCS 1 800 band and the GSM 900 MHz band.
With a channel separation of 200 kHz, utilising constant envelope modulation and carrying traffic channels according to the Time Division Multiple Access (TDMA) principle.
The present document specifies the access requirements for terminals as stated above implementing the GSM standard.
For each test purpose and its corresponding conformance requirement, a reference is given to the test method in EN 300 607-1 (GSM 11.10-1) [2]. The requirements apply at the air interface and the Subscriber Identity Module - Mobile Equipment interface for the access requirements, which may be stimulated to perform the tests by additional equipment if necessary.
The measurement uncertainty is described in EN 300 607-1 (GSM 11.10-1) [2].
The present document covers the essential requirements of the Terminal Directive 98/13/EC [1] Articles 5d, 5e, 5f. Non
access related aspects of speech telephony, where Article 5g has been applied, are covered by EN 301 420.
The Terminal Directive 98/13/EC [1] Articles 5a and 5b are covered by other directives, and, therefore, not by the present document. In the present document, there are no Electromagnetic Compatibility technical requirements in terms of the Terminal Directive 98/13/EEC [1], Article 5c.
NOTE 1: Technical Requirements for EMC performance and testing of the equipment are covered by the relevant standards applicable to the EMC Directive 89/336/EEC, annex A. Terminal equipment may be subject to additional requirements in other Common Technical Regulations (CTR) or Harmonized standards depending on the equipment functionality.
EN (...abbreviated)