The present document specifies the technical requirements to be met by GSM terminal equipment capable of operating
in the frequency bands allocated for use by private networks of the European Railways (876 - 880 MHz and
921 - 925 MHz). The present document applies to R-GSM terminals for Phase 2+ of the public land mobile radio
service, operating in the European Railways R-band frequency in addition to the 900 MHz GSM band with a channel
separation of 200 kHz, utilising constant envelope modulation and carrying traffic channels according to the Time
Division Multiple Access (TDMA) principle.
The present document specifies the R-GSM terminal requirements for the European Railways version of the Global
System for Mobile communications (GSM).
For each test purpose and its corresponding conformance requirement, a reference is given to the test method in
EN 300 607-1 (GSM 11.10-1) [2]. The requirements apply at the air interface and the Subscriber Identity
Module - Mobile Equipment interface for the access requirements, which may be stimulated to perform the tests by
additional equipment if necessary.
The measurement uncertainty is described in EN 300 607-1 (GSM 11.10-1) [2].
The present document covers the telecommunication terminal equipment (TTE) essential requirements of the Terminal
Directive 98/13/EC [1] Articles 5d, 5e, 5f.
The Terminal Directive 98/13/EC [1] Articles 5a and 5b are covered by other directives, and, therefore, not by the
present document.
In the present document, there are no Electromagnetic Compatibility technical requirements in terms of the Terminal
Directive 98/13/EC [1], Article 5c.
NOTE 1: Technical Requirements for EMC performance and testing of the equipment are covered by the relevant
standards applicable to the EMC Directive 89/336/EEC, annex A.
The present document specifies the R-GSM terminals additional requirements, which will apply in addition to the
Harmonised St (...abbreviated)