The present document specifies the minimum performance parameters for terrestrial digital fixed service radio
communications equipments operating in the 52 GHz frequency band and provides for the following:
introduction of unique system type codes for regulatory reference to the various system types detailed in the
present document, refer to new annex C (normative) and related categories of equipment classes of spectral
efficiency;
payload capacities for spectrum efficiency classes 1 to 4;
digital services operating in frequency division duplex (FDD) operation only;
specific antenna radiation patterns as defined in EN 300 833 [11]).
Digital systems are intended to be used for point-to-point connections in local and regional networks at data rates
between 2 Mbit/s and Synchronous Transport Module, level 1 (STM-1)
Digital systems considered in the present document will be able to meet the error performance objectives of the ITU-R
national portion of the reference path, i.e. ITU-R Recommendation F.1189 [18] and the error performance objectives
detailed in ITU-T Recommendation G.826 [25].
The parameters to be specified fall into two categories:
a) those that are required to provide compatibility between channels from different sources of equipment on the
same route, connected to separate antennas;
b) parameters defining the transmission quality of the proposed system.
The present document deals with Radio Frequency (RF) and baseband characteristics relevant to low, medium and high
capacity Plesiochronous Digital Hierarchy (PDH) transmission systems, and STM-0 and STM-1 Synchronous Digital
Hierarchy (SDH) transmission systems. Antenna/feeder system requirements are covered in EN 300 833 [11].
The present document does not contain aspects related to test procedures and test conditions however they are to be
found in EN 301 126-1 [3].
As the maximum transmission rate in a given bandwidth depend (. (...abbreviated)