This test method covers the use of an impedance tube, two microphone locations and a digital frequency analysis
system for the determination of the sound absorption coefficient of sound absorbers for normal sound incidence. It
can also be applied for the determination of the acoustical surface impedance or surface admittance of sound
absorbing materials. Since the impedance ratios of a sound absorptive material are related to its physical
properties, such as airflow resistance, porosity, elasticity and density, measurements described in this test method
are useful in basic research and product development.
The test method is similar to the test method specified in ISO 10534-1 in that it uses an impedance tube with a
sound source connected to one end and the test sample mounted in the tube at the other end. However, the
measurement technique is different. In this test method, plane waves are generated in a tube by a noise source,
and the decomposition of the interference field is achieved by the measurement of acoustic pressures at two fixed
locations using wall-mounted microphones or an in-tube traversing microphone, and subsequent calculation of the
complex acoustic transfer function, the normal incidence absorption and the impedance ratios of the acoustic
material. The test method is intended to provide an alternative, and generally much faster, measurement technique
than that of ISO 10534-1.
Compared with the measurement of the sound absorption in a reverberation room according to the method
specified in ISO 354, there are some characteristic differences. The reverberation room method will (under ideal
conditions) determine the sound absorption coefficient for diffuse sound incidence, and the method can be used for
testing of materials with pronounced structures in the lateral and normal directions. However, the reverberation
room method requires test specimens which are rather large, so it is no (...abbreviated)
Dieses Prüfverfahren behandelt die Bestimmung des Schallabsorptionsgrades von Schallabsorbern bei senkrechtem Schalleinfall unter Anwendung eines Impedanzrohres, zweier Mikrophonorte sowie eines digitalen Frequenzanalysesystems. Es kann auch zur Bestimmung der akustischen Oberflächenimpedanz oder Oberflächenadmittanz von schallabsorbierenden Werkstoffen eingesetzt werden. Die für dieses Prüfverfahren beschriebenen Messungen sind in der Grundlagenforschung und Produktentwicklung anwendbar. Das Prüfverfahren ist dem in ISO 10534-1 beschriebenen insofern ähnlich, dass ein Impedanzrohr verwendet wird, das an einem Ende eine Schallquelle besitzt und an dessen anderem Ende der Prüfling befestigt wird. Das Messverfahren ist jedoch ein anderes und im Vergleich zu dem in ISO 10534-1 behandelten im Allgemeinen ein viel schnelleres Messverfahren. Verglichen mit der Messung des Schallabsorptionsgrades in einem Hallraum nach ISO 354 bestehen einige charakteristische Unterschiede. Beim Hallraumverfahren wird (unter idealisierten Bedingungen) der Schallabsorptionsgrad bei diffusem Schalleinfall bestimmt und kann für die Prüfung von Werkstoffen mit ausgeprägter Struktur in seitlicher und senkrechter Richtung angewendet werden. Jedoch erfordert das Hallraumverfahren relativ große Prüflinge, so dass es für Forschungs- und Entwicklungsarbeiten, bei denen nur kleine Prüflinge von Absorbern zur Verfügung stehen, nicht geeignet ist.