Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыON

ÖNORM EN ISO 21809-3:2020-11

Действует
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016 + Amd 1:2020) (consolidated version)
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

ASTM D1000-99
Заменен
Standard Test Method for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications — 19 стр.
ASTM D1141-98e1
Заменен
Standard Practice for the Preparation of Substitute Ocean Water — 3 стр.
ASTM D1321-97
Заменен
Standard Test Method for Needle Penetration of Petroleum Waxes — 3 стр.
ASTM D2084-95
Заменен
Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter — 12 стр.
ASTM D4285-83(1999)
Заменен
Standard Test Method for Indicating Oil or Water in Compressed Air — 1 стр.
ASTM D4541-95e1
Заменен
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers — 10 стр.
ISO 34-1:2010
Заменен
Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces — 18 стр.
ISO 37:2017
Действует
Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties — 36 стр.
ISO 62:2008
Действует
Plastics -- Determination of water absorption — 22 стр.
ISO 188:2011
Действует
Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests — 28 стр.
ISO 527-2:2012
Действует
Plastics -- Determination of tensile properties -- Part 2: Test conditions for moulding and extrusion plastics — 16 стр.
ISO 527-3:1995/Cor.2:2001
Заменен
Plastics. Determination of tensile properties. Part 3. Test conditions for films and sheets. Technical Corrigendum 2 — 1 стр.
ISO 868:2003
Действует
Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness) — 10 стр.
ISO 1431-1:2012
Действует
Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 1: Static and dynamic strain testing — 22 стр.
ISO 1523:2002
Действует
Determination of flash point -- Closed cup equilibrium method — 16 стр.
ISO 1817:2011
Заменен
Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids — 24 стр.
ISO 2178:1982
Заменен
Non-magnetic coatings on magnetic substrates; Measurement of coating thickness; Magnetic method — 6 стр.
ISO 2781:2008/Amd.1:2010
Заменен
Rubber, vulcanized or thermoplastic -- Determination of density -- Amendment 1 — 8 стр.
ISO 2808:2007
Действует
Paints and varnishes -- Determination of film thickness — 46 стр.
ISO 2811-1:2011
Заменен
Paints and varnishes -- Determination of density -- Part 1: Pyknometer method — 16 стр.
ISO 3251:2008
Действует
Paints, varnishes and plastics -- Determination of non-volatilematter content — 12 стр.
ISO 3303-1:2012
Действует
Rubber- or plastics-coated fabrics -- Determination of bursting strength -- Part 1: Steel-ball method — 12 стр.
ISO 3417:2008
Заменен
Rubber -- Measurement of vulcanization characteristics with the oscillating disc curemeter — 16 стр.
ISO 3801:1977
Действует
Textiles; Woven fabrics; Determination of mass per unit length and mass per unit area — 8 стр.
ISO 4591:1992
Действует
Plastics; film and sheeting; determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness) — 8 стр.
ISO 4593:1993
Действует
Plastics; film and sheeting; determination of thickness by mechanical scanning — 8 стр.
ISO 4624:2002
Заменен
Paints and varnishes. Pull-off test for adhesion — 16 стр.
ISO 4625-1:2004
Действует
Binders for paints and varnishes -- Determination of softening point -- Part 1: Ring-and-ball method — 16 стр.
ISO 5893:2002
Действует
Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification — 11 стр.
ISO 7619-1:2010
Заменен
Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness) — 18 стр.
ISO 8501-1:2007
Действует
Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings — 96 стр.
ISO 8501-3:2006
Действует
Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 3: Preparation grades of welds, edges and other areas with surface imperfections — 12 стр.
ISO 8502-3:1992
Заменен
Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 3: assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) — 14 стр.
ISO 8502-6:2006
Действует
Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 6: Extraction of soluble contaminants for analysis -- The Bresle method — 14 стр.
ISO 8502-9:1998
Действует
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts — 12 стр.
ISO 8503-1:2012
Действует
Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces — 16 стр.
ISO 8503-2:2012
Действует
Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel -- Comparator procedure — 12 стр.
ISO 8503-4:2012
Действует
Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile -- Stylus instrument procedure — 16 стр.
ISO 8503-5:2003
Заменен
Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 5: Replica tape method for the determination of the surface profile — 13 стр.
ISO 8504-2:2000
Действует
Preparation of steel substrates before application of paints and related product - Surface preparation methods - Part 2: Abrasive blast-cleaning — 20 стр.
ISO 8503-3:2012
Действует
Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile -- Focusing microscope procedure — 18 стр.
ISO 10474:2013
Действует
Steel and steel products -- Inspection documents — 10 стр.
ISO 11357-1:2016
Действует
Plastics -- Differential scanning calorimetry (DSC) -- Part 1: General principles — 40 стр.
ISO 11357-2:2013
Действует
Plastics -- Differential scanning calorimetry (DSC) -- Part 2: Determination of glass transition temperature and glass transition step height — 12 стр.
ISO 11357-3:2011
Заменен
Plastics -- Differential scanning calorimetry (DSC) -- Part 3: Determination of temperature and enthalpy of melting and crystallization — 12 стр.
ISO 11357-6:2008
Заменен
Plastics -- Differential scanning calorimetry (DSC) -- Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) — 20 стр.
ISO 13623:2017
Действует
Petroleum and natural gas industries -- Pipeline transportation systems — 96 стр.
ISO 21809-2:2014
Действует
Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 2: Single layer fusion-bonded epoxy coatings — 58 стр.
ISO 80000-1:2009
Действует
Quantities and units -- Part 1: General — 50 стр.
ÖNORM EN 10204:2005-01
Действует
Metallic products - Types of inspection documents
ASTM D70-97
Заменен
Standard Test Method for Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method) — 3 стр.
ASTM D92-85
Заменен
Standard Test Method for Flash and Fire Points by Cleveland Open Cup — 6 стр.
ASTM D127-63(1977)
Заменен
Standard Test Method for Drop Melting Point Of Petroleum Wax Including Petrolatum — 2 стр.
ASTM D149-20
Действует
Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies — 13 стр.
ASTM D257-91
Заменен
Standard Test Methods for D-C Resistance or Conductance of Insulating Materials — 16 стр.
ASTM D695-96
Заменен
Standard Test Method for Compressive Properties of Rigid Plastics — 7 стр.
ASTM D937-97
Заменен
Standard Test Method for Cone Penetration of Petrolatum — 2 стр.
ASTM D938-71(1981)
Заменен
Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum — 2 стр.
ÖNORM EN ISO 21809-3:2016-09
Заменен
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)

На этот документ ссылаются

DIN EN ISO 15589-1:2019-09
Действует
Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline systems - Part 1: On-land pipelines (ISO 15589-1:2015) — 102 стр.
ÖNORM EN ISO 21809-3:2016-09
Заменен
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)