This document specifies the gas chromatographic (GC) method for the determination of saturated, olefinic and aromatic hydrocarbons in automotive motor gasoline and ethanol (E85) automotive fuel.
Additionally, the benzene and toluene content, oxygenated compounds and the total oxygen content can be determined.
This document defines two procedures, A and B.
Procedure A is applicable to automotive motor gasoline with total aromatics of 19,32 % (V/V) up to 46,29 % (V/V); total olefins from 0,40 % (V/V) up to 26,85 % (V/V); oxygenates from 0,61 % (V/V) up to 9,85 % (V/V); oxygen content from 1,50 % (m/m) to 12,32 % (m/m); benzene content from 0,38 % (V/V) up to 1,98 % (V/V) and toluene content from 5,85 % (V/V) up to 31,65 % (V/V).
The method has also been tested for individual oxygenates. A precision has been determined for a total volume of methanol from 1,05 % (V/V) up to 16,96 % (V/V); a total volume of ethanol from 0,50 % (V/V) up to 17,86 % (V/V); a total volume of MTBE from 0,99 % (V/V) up to 15,70 % (V/V), a total volume of ETBE from 0,99 % (V/V) up to 15,49 % (V/V), a total volume of TAME from 0,99 % (V/V) up to 5,92 % (V/V), and a total volume of TAEE from 0,98 % (V/V) up to 15,59 % (V/V).
Although this test method can be used to determine higher-olefin contents of up to 50 % (V/V), the precision for olefins was tested only in the range from 0,40 % (V/V) to 26,85 % (V/V).
Although specifically developed for the analysis of automotive motor gasoline that contains oxygenates, this test method can also be applied to other hydrocarbon streams having similar boiling ranges, such as naphthas and reformates.
Procedure B describes the analysis of oxygenated groups (ethanol, methanol, ethers, C3 – C5 alcohols) in ethanol (E85) automotive fuel containing ethanol between 50 % (V/V) and 85 % (V/V). The gasoline is diluted with an oxygenate-free component to lower the ethanol content to a value below 20 % (V/V) before the analysis by GC.
The sample can be fully analysed including hydrocarbons. Precision data for the diluted sample are only available for the oxygenated groups.
Dieses Dokument legt ein Verfahren zur gaschromatographischen Bestimmung (GC) von gesättigten, olefinischen und aromatischen Kohlenwasserstoffen in Ottokraftstoffen und Ethanolkraftstoff (E85) fest. Zusätzlich können die Gehalte an Benzol und Toluol, sauerstoffhaltigen Verbindungen sowie der Gesamsauerstoffgehalt bestimmt werden.
Verfahren A ist anwendbar für Ottokraftstoffe mit einem Gesamtaromatenanteil von 19,32 % (V/V) bis zu 46,29 % (V/V), einem Gesamtolefinanteil von 0,40 % (V/V) bis zu 26,85 % (V/V), einem Anteil an sauerstoffhaltigen Verbindungen von 0,61 % (V/V) bis zu 9,85 % (V/V), einem Sauerstoffgehalt von 1,50 % (m/m) bis 12,32 % (m/m), einem Benzolgehalt von 0,38 % (V/V) bis zu 1,98 % (V/V) und einem Toluolgehalt von 5,85 % (V/V) bis zu 31,65 % (V/V).
Das Verfahren wurde auch für einzelne sauerstoffhaltige Verbindungen geprüft. Die Präzision wurde bestimmt für ein Gesamtvolumen an Methanol von 1,05 % (V/V) bis zu 16,96 % (V/V), ein Gesamtvolumen an Ethanol von 0,50 % (V/V) bis zu 17,86 % (V/V), ein Gesamtvolumen an MTBE von 0,99 % (V/V) bis zu 15,70 % (V/V), ein Gesamtvolumen an ETBE von 0,99 % (V/V) bis zu 15,49 % (V/V), ein Gesamtvolumen an TAME von 0,99 % (V/V) bis zu 5,92 % (V/V) und ein Gesamtvolumen an TAEE von 0,98 % (V/V) bis zu 15,59 % (V/V).
Obwohl dieses Prüfverfahren zur Bestimmung höherer Olefingehalte bis zu 50 % (V/V) angewendet werden kann, wurde die Präzision für Olefine nur im Bereich von 0,40 % (V/V) bis 26,85 % (V/V) ermittelt.
Obwohl dieses Verfahren speziell für die Analyse von Ottokraftstoffen mit sauerstoffhaltigen Verbindungen entwickelt wurde, kann es auch auf andere Kohlenwasserstoffe mit ähnlichen Siedebereichen, wie z. B. Naphthas und Reformate, angewendet werden.
Verfahren B beschreibt die Analyse von sauerstoffhaltigen Verbindungen (Ethanol, Methanol, Ether, C3- bis C5-Alkohole) in Ethanolkraftstoffen (E85) mit einem Ethanolgehalt zwischen 50 % (V/V) und 85 % (V/V). Das Benzin wird mit einer sauerstofffreien Komponente verdünnt, um den Ethanolgehalt vor der GC-Analyse auf einen Wert unter 20 % (V/V) zu senken.
Die Probe kann einschließlich der Kohlenwasserstoffe vollständig analysiert werden. Präzisionsdaten für die verdünnte Probe sind nur für die Gruppe der Sauerstoffverbindungen vorhanden.