This International Standard specifies a method for determining the gel time of
phenolic resins at a given temperature, using automatic apparatus under specified
conditions. The test temperatures are 100 ¿C, 130 ¿C and 150 ¿C.
The method specified employs a plunger driven to carry out a reciprocating vertical
motion. ,
This method applies to the following types of phenolic resin:
- liquid resols
- solid resols with low melting points
Powdered resins with a short gel time, such as mixtures of novolak and
hexamethylenetetramine, do not lend themselves to this type of determination. Such
resins crosslink as soon as fusion starts and become too viscous in the test tube to give
meaningful results. Resins containing large amounts of a solvent with a low boiling point
are especially unsuitable for this type of determination. With such resins, a boiling and
distillation process takes place as the resin hardens.
It might be of interest to determine the time taken for the resin to gel in the presence
of a catalyst. The catalyst shall be added in well defined proportions. The type of
catalyst used and its treatment shall be stated in the test report.
Diese Norm beschreibt ein Verfahren zur Bestimmung der Gelierzeit von Phenolharzen bei vorgegebener Temperatur durch Einsatz eines automatischen Gerätes unter spezifischen Bedingungen. Die Prüftemperaturen sind 100 °C, 130 °C und 150 °C. Bei der Methode wird ein sich vertikal (auf und ab) bewegender Messstempel verwendet. Dieses Verfahren kann für folgende Phenolharztypen angewendet werden: flüssige Resole, feste Resole mit niedrigem Schmelzpunkt. Pulverharze mit kurzer Gelierzeit, wie Mischungen aus Novolak und Hexamethylentetramin, sind für dieses Bestimmungsverfahren nicht geeignet. Solche Harze beginnen bereits während des Aufschmelzens zu vernetzen und werden im Reagenzglas zu viskos, um brauchbare Ergebnisse zu bringen. Harze, die große Lösemittelmengen mit niedrigem Siedepunkt enthalten, sind ebenfalls ungeeignet. Bei diesen Harzen überlagern sich ein Koch- und ein Destillationsvorgang, während das Harz aushärtet.