This Technical Report refers to standard EN 15316-1:2017, modules M3-1, M8-1, M3-4, M8-4, M3-9,
M8-9.
It contains information to support the correct understanding, use and national adaptation of standard
EN 15316-1:2017.
This Technical Report does not contain any normative provision.
The related standard EN 15316-1:2017 is the general frame for the calculation of the energy use and
the energy performance of heating and domestic hot water systems. This standards is only dealing with
the heat, provided by water based systems, needed for heating, domestic hot water and cooling (e.g.
absorption chiller).
It specifies how to perform the calculation of the entire installation using the calculation modules (see
Figure 1) corresponding to the methods defined in the respective standards.
It deals with common issues like operating conditions calculation and energy performance indicators.
It standardises the inputs and outputs in order to achieve a common European calculation method.
It allows the energy analysis of the heating and Domestic hot water systems and sub-systems including
control (emission, distribution, storage, generation) by comparing the system losses and by defining
energy performance indicators.
The performance analysis allows the comparison between systems and sub-systems and makes
possible to evaluate the impact of each sub-system on the energy performance of a building.
The calculation of the system losses of each part of the heating sub-systems is defined in subsequent
standards.
Ventilation systems are not included in this standard (e.g. balanced systems with heat recovery), but if
the air is preheated or an air heating system is installed, the systems providing the heat to the AHU (Air
Handling Unit) are covered by this standard.