Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru

ÖVE/ÖNORM EN 61056-2:2013-07

Действует
General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking (IEC 61056-2:2012 + Corrigendum Oct. 2012) (english version)
This part of IEC 61056 specifies the dimensions, terminals and marking for all general purpose
lead-acid cells and batteries of the valve regulated type:
• for either cyclic or float charge application;
• in portable equipment, for instance, incorporated in tools, toys, or in static emergency, or
uninterruptible power supply and general power supplies.
The cells of this kind of lead-acid battery may either have flat-plate electrodes in prismatic
containers or have spirally wound pairs of electrodes in cylindrical containers. The sulphuric
acid in these cells is immobilized between the electrodes either by absorption in a microporous
structure or in a gelled form.
This standard defines the dimensions of the batteries in length, height and width, as well as the
shapes of the terminals.
The lead-acid cells and batteries which are described in this standard should be tested
according to the requirements of IEC 61056-1.
This part of IEC 61056 does not apply for example to lead-acid cells and batteries used for
• vehicle engine starting applications (IEC 60095 series),
• traction applications (IEC 60254 series) or
• stationary applications (IEC 60896 series).
Conformance to this standard requires that dimensions, terminals and marking correspond to
these requirements.
ICS
29.220.20 Acid secondary cells and batteries / Кислотные аккумуляторы и аккумуляторные батареи