Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru

ÖVE/ÖNORM EN 61701:2012-11

Действует
Salt mist corrosion testing of photovoltaic (PV) modules (IEC 61701:2011) (english version)
Photovoltaic (PV) modules are electrical devices intended for continuous outdoor exposure
during their lifetime. Highly corrosive wet atmospheres, such as marine environments, could
eventually degrade some of the PV module components (corrosion of metallic parts,
deterioration of the properties of some non-metallic materials - such as protective coatings
and plastics - by assimilation of salts, etc.) causing permanent damages that could impair
their functioning. Temporary corrosive atmospheres are also present in places where salt is
used in winter periods to melt ice formations on streets and roads.
This Standard describes test sequences useful to determine the resistance of different PV
modules to corrosion from salt mist containing Cl- (NaCl, MgCl2, etc.). All tests included in the
sequences, except the bypass diode functionality test, are fully described in IEC 61215,
IEC 61646, IEC 62108, IEC 61730-2 and IEC 60068-2-52. They are combined in this Standard
to provide means to evaluate possible faults caused in PV modules when operating under wet
atmospheres having high concentration of dissolved salt (NaCl). Depending on the specific
nature of the surrounding atmosphere to which the module is exposed in real operation
several testing severities can be applied, as defined in IEC 60068-2-52. For example severity
(1) is intended to be used for PV modules used in a marine environment, or in close proximity
to the sea. Severities (3) to (6) are intended for PV modules operating in locations where
there could be a change between salt-laden and dry atmospheres, for examples in places
where salt is used to melt ice formations. Severity (2) is not suitable for PV modules as
testing conditions are too weak (this severity is originally intended for products exposed to
corrosive environments from time to time that are normally protected by an enclosure) and
should be avoided when applying this Standard.
This Standard can be applied to both flat plate PV modules and concentrator PV modules and
assemblies.
ICS
27.160 Solar. Including photovoltaic energy systems / Гелиоэнергетика. Включая фотоэлектрические системы