Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыON

ÖVE/ÖNORM EN 61984:2010-01

Действует
Connectors - Safety requirements and tests (IEC 61984:2008) (english version)
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

BS EN 60352-5:2008
Заменен
Solderless connections. Press-in connections. General requirements, test methods and practical guidance — 40 стр.
BS EN 60352-7:2002
Действует
Solderless connections. Spring clamp connections. General requirements, test methods and practical guidance — 30 стр.
BS EN 60512-29-100:2015
Действует
Connectors for electronic equipment. Tests and measurements. Signal integrity tests up to 500 MHz on M12 style connectors. Tests 29a to 29g — 58 стр.
BS EN 60512-1-100:2006
Заменен
Connectors for electronic equipment. Test and measurements. General — 12 стр.
BS EN 60664-1:2007
Действует
Insulation coordination for equipment within low-voltage systems. Principles, requirements and tests — 78 стр.
BS EN 60664-5:2007
Действует
Insulation coordination for equipment within low-voltage systems. Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm — 48 стр.
BS EN 60998-2-3:2004
Действует
Connecting devices for low-voltage circuits for household and similar purposes. Particular requirements for connecting devices as separate entities with insulation-piercing clamping units — 24 стр.
BS EN 60999-1:2000
Действует
Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units, General requirements and particular requirements for clamping units for conductors from 0,2 mm$u2 up to 35 mm$u2 (included) — 32 стр.
BS EN 60999-2:2003
Действует
Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units. Particular requirements for clamping units for conductors above 35 mm$u2 up to 300 mm$u2 (included) — 22 стр.
BS EN 61032:1998
Действует
Protection of persons and equipment by enclosures. Probes for verification — 30 стр.
BS EN 61140:2002
Заменен
Protection against electric shock. Common aspects for installation and equipment — 48 стр.
BS EN 61210:1995
Заменен
Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements — 32 стр.
IEC 60050-581:1978 ed1.0
Заменен
International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment — 93 стр.
IEC 60050-826:2004 ed2.0
Заменен
International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations — 131 стр.
IEC 60060-1:1989 ed2.0
Заменен
High-voltage test techniques. Part 1: General definitions and test requirements — 78 стр.
IEC 60068-1:1960/AMD2:1964 ed2.0
Заменен
Amendment 2 - Recommended basic climatic and mechanical robustness testing procedure for components for electronic equipment - Part 1: General — 10 стр.
IEC 60068-2-70:1995 ed1.0
Действует
Environmental testing - Part 2-70: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands — 10 стр.
IEC 60228:2004 ed3.0
Заменен
Conductors of insulated cables — 19 стр.
IEC 60309-1:1999 ed4.0
Заменен
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements — 153 стр.
IEC 60352-1:1983 ed2.0
Заменен
Solderless connections. Part 1: Solderless wrapped connections - General requirements, test methods and practical guidance. — 59 стр.
IEC 60352-2:1990 ed1.0
Заменен
Solderless connections - Part 2: Solderless crimped connections - General requirements, test methods and practical guidance — 83 стр.
IEC 60352-3:1993 ed1.0
Заменен
Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance — 61 стр.
IEC 60352-4:1994 ed1.0
Заменен
Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test methods and practical guidance — 71 стр.
IEC 60352-5:2001 ed2.0
Заменен
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance — 69 стр.
IEC 60352-6:1997 ed1.0
Заменен
Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance — 53 стр.
IEC 60352-7:2020 ed2.0
Действует
Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance — 30 стр.
IEC 60364-4-41:1992 ed3.0
Заменен
Electrical installations of buildings - Part 4: Protection for safety - Chapter 41: Protection against electric shock — 49 стр.
IEC 60512-1-100:2012 ed3.0
Действует
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications — 20 стр.
IEC 60529:1989 ed2.0
Действует
Degrees of protection provided by enclosures (IP Code) — 73 стр.
IEC 60664-1:2007 ed2.0
Заменен
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests — 148 стр.
IEC 60664-5:2007 ed2.0
Отменен
Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm — 93 стр.
IEC 60760:1989 ed2.0
Заменен
Flat, quick-connect terminations — 30 стр.
IEC 60998-2-3:2002 ed2.0
Действует
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units — 43 стр.
IEC 60999-1:1999 ed2.0
Действует
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) — 55 стр.
IEC 60999-2:2003 ed2.0
Действует
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) — 35 стр.
IEC 61032:1997/COR1:2003 ed2.0
Действует
Corrigendum 1 - Protection of persons and equipment by enclosures - Probes for verification — 0 стр.
IEC 61140:2001/AMD1:2004 ed3.0
Заменен
Amendment 1 - Protection against electric shock - Common aspects for installation and equipment — 5 стр.
IEC 61210:1993 ed1.0
Заменен
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements — 45 стр.
ISO 6988:1985
Действует
Metallic and other non organic coatings; Sulfur dioxide test with general condensation of moisture — 8 стр.
BS EN 60068-2-70:1996
Действует
Environmental testing. Test methods, Test Xb. Abrasion of markings and letterings caused by rubbing of fingers and hands — 14 стр.
BS EN 60228:2005
Действует
Conductors of insulated cables — 22 стр.
BS EN 60352-1:1997
Заменен
Solderless connections, General requirements, test methods and practical guidance — 32 стр.
BS EN 60352-2:2006
Действует
Solderless connections. Crimped connections. General requirements, test methods and practical guidance — 60 стр.

На этот документ ссылаются

DIN EN 1501-5:2011-11
Отменен
Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles; German version EN 1501-5:2011 — 91 стр.
DIN EN 175301-801:2007-08
Действует
Detail Specification: High density rectangular connectors, round removable crimp contacts; German version EN 175301-801:2006 — 40 стр.
DIN EN 16840:2017-05
Действует
Inland navigation vessels - Electrical shore connection, three-phase current 400 V, 50 Hz, at least 250 A; German version EN 16840:2017 — 23 стр.
DIN EN 1501-5:2012-02
Отменен
Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles; German version EN 1501-5:2011 — 88 стр.