Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыSAE

SAE AIR1594B

Заменен
Plain Bearing Selection for Landing Gear Applications
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

SAE AIR5883B
Действует
Landing Gear Shock Strut Bearing Selection
SAE AMS4533E
Действует
Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)
SAE AMS4534E
Действует
Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be Solution Heat Treated, Cold Worked, and Precipitation Heat Treated (TH04, formerly HT)
SAE AMS4535E
Действует
Copper-Beryllium Alloy, Mechanical Tubing 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)
SAE AMS4590D
Действует
Extrusions, Nickel-Aluminum Bronze, Martensitic 78.5Cu – 10.5Al – 5.1Ni – 4.8Fe Quenched and Tempered (TQ50)
SAE AMS4596B
Действует
Copper Nickel Tin Alloy, Bars and Rods 77Cu – 15Ni – 8Sn Solution Annealed and Spinodal Hardened (TX 00)
SAE AMS4640J
Действует
Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50)
SAE AMS4880D
Действует
Aluminum Bronze Alloy, Centrifugal and Continuous-Cast Castings 81.5Cu - 10.3Al - 5.0Ni - 2.8Fe Quench Hardened and Temper Annealed (TQ50)
SAE AMS4881D
Действует
Nickel-Aluminum-Bronze, Martensitic, Sand, Centrifugal and Continuous Castings 78Cu - 11Al - 5.1Ni - 4.8Fe Quench Hardened and Temper Annealed
SAE AMS5643W
Действует
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb (Nb) - 4.0Cu Solution Heat Treated, Precipitation Hardenable
SAE ARP5935
Действует
Use of HVOF Thermal Spray Coatings for Hard Chrome Replacement in Landing Gear Applications
SAE AS14101E
Действует
BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, NARROW, GROOVED RACE, -65 TO +325 °F
SAE AS14102E
Действует
BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE, CHAMFERED RACE, -65 TO +325 °F
SAE AS14103F
Действует
BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE, GROOVED RACE, -65 TO +325 °F
SAE AS14104E
Действует
BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, NARROW, CHAMFERED RACE, -65 TO +325 °F
SAE AS21230A
Действует
BEARING, PLAIN, SELF-ALIGNING, GROOVED OUTER RING PTFE LINED, WIDE
SAE AS81820D
Действует
Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation
SAE AS81820/1D
Действует
BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, NARROW, GROOVED RACE, −65 TO +325 °F
SAE AS81934C
Действует
Bearings, Sleeve, Plain and Flanged, Self-Lubricating
SAE AS81934/1B
Действует
BEARING, SLEEVE, PLAIN, SELF-LUBRICATING, -65 °F TO 325 °F
SAE AS81934/2B
Действует
BEARING, SLEEVE, FLANGED, SELF-LUBRICATING, -65 °F TO 325 °F
SAE AS81935C
Действует
Bearings, Plain, Rod End, Self-Aligning, Self-Lubricating, General Specification For (-65 to +325 °F)
SAE AS81936A
Действует
Bearings, Plain, Self-Aligning (Cu-Be Ball, CRES Race) General Specification For
ASTM E1417-99
Заменен
Standard Practice for Liquid Penetrant Examination — 10 стр.
ASTM E1444-94A
Заменен
Standard Practice for Magnetic Particle Examination — 15 стр.
SAE AIR1594C
Действует
Plain Bearing Selection for Landing Gear Applications
SAE AIR1594A
Заменен
Plain Bearing Selection for Landing Gear Applications

На этот документ ссылаются

SAE AIR1594A
Заменен
Plain Bearing Selection for Landing Gear Applications
SAE AIR1594C
Действует
Plain Bearing Selection for Landing Gear Applications