Стандарты SAE

SAE AMS2759G

Действует

Heat Treatment of Steel Parts General Requirements

Описание Изменения Ссылки Версии

Ссылочные документы

SAE AMS2750H

Действует

Pyrometry

SAE AMS2759/1J

Действует

Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)

SAE AMS2759/10C

Действует

Automated Gaseous Nitriding Controlled by Nitriding Potential

SAE AMS2759/11A

Действует

Stress Relief of Steel Parts

SAE AMS2759/12B

Действует

Automated Gaseous Nitrocarburizing Controlled by Potentials

SAE AMS2759/2K

Действует

Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher

SAE AMS2759/3J

Действует

Heat Treatment Precipitation-Hardening Corrosion-Resistant, Maraging, and Secondary Hardening Steel Parts

SAE AMS2759/4D

Действует

Heat Treatment Austenitic Corrosion-Resistant Steel Parts

SAE AMS2759/5F

Действует

Heat Treatment Martensitic Corrosion-Resistant Steel Parts

SAE AMS2759/6D

Действует

Gaseous Nitriding of Steel Parts, Controlled by Ammonia Dissociation

SAE AMS2759/7E

Действует

Carburizing and Heat Treatment of Carburizing Grade Steel Parts

SAE AMS2759/8B

Действует

Ion Nitriding

SAE AMS2759/9E

Действует

Hydrogen Embrittlement Relief (Baking) of Steel Parts

SAE AMS2769D

Действует

Heat Treatment of Parts in a Vacuum

SAE ARP1962B

Действует

Training and Approval of Heat-Treating Personnel

ASTM C848-88(2020)

Действует

Standard Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance — 7 стр.

ASTM D1259-85(2001)

Заменен

Standard Test Methods for Nonvolatile Content of Resin Solutions — 4 стр.

ASTM A370-97a

Заменен

Standard Test Methods and Definitions for Mechanical Testing of Steel Products — 52 стр.

ASTM E1099-96

Отменен

Standard Specification for Soda Ash, Anhydrous (Sodium Carbonate, Anhydrous) (Withdrawn 2001) — 1 стр.

ASTM E1899-97

Заменен

Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide — 5 стр.

ASTM E384-99e1

Заменен

Standard Test Method for Microindentation Hardness of Materials — 24 стр.

ASTM E8M-04

Заменен

Standard Test Methods for Tension Testing of Metallic Materials [Metric] (Withdrawn 2008) — 24 стр.

SAE AMS2759F

Заменен

Heat Treatment of Steel Parts General Requirements

На этот документ ссылаются

SAE MA4510

Действует

Fittings, Weld, Fluid Connection, 35 000 kPa, Metric

SAE AMS2451/5

Заменен

Plating, Brush, Chromium Hard Deposit, Trivalent

SAE AMS2451/3

Заменен

Plating, Brush, Nickel Low Stress, Low-Hardness Deposit

SAE AMS2451/1

Заменен

Plating, Brush, Nickel General Purpose

SAE AMS2759A

Заменен

HEAT TREATMENT OF STEEL PARTS General Requirements

SAE AMS2753D

Действует

Liquid Salt Bath Ferritic Nitrocarburizing Non-Cyanide Bath (Stabilized: Jul 2019)

SAE AMS2753C

Заменен

Liquid Salt Bath Ferritic Nitrocarburizing Non-Cyanide Bath

SAE AMS2753B

Заменен

LIQUID SALT BATH FERRITIC NITROCARBURIZING Non-Cyanide Bath

SAE AMS6300E

Заменен

Steel Bars and Forgings 0.25Mo (0.35 - 0.40C) (SAE 4037)

SAE AMS2451/5B

Заменен

Plating, Brush, Chromium Hard Deposit, Trivalent

SAE AMS2451/5A

Заменен

Plating, Brush, Chromium Hard Deposit, Trivalent

SAE AMS2451/4A

Заменен

Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement

SAE AMS2451/3B

Заменен

Plating, Brush, Nickel Low Stress, Low-Hardness Deposit

SAE AMS2451/3A

Заменен

Plating, Brush, Nickel Low Stress, Low-Hardness Deposit

SAE AMS2451/3D

Действует

Plating, Brush, Nickel Low-Stress, Low-Hardness Deposit

SAE AMS2451/2A

Действует

Plating, Brush, Nickel Low Stress, Hard Deposit

SAE AMS2451/2B

Действует

Plating, Brush, Nickel Low Stress, Hard Deposit

SAE AMS2451A

Заменен

Plating, Brush General Requirements

SAE AMS2451C

Заменен

Plating, Brush General Requirements

SAE AMS2451B

Заменен

Plating, Brush General Requirements

SAE AMS2451D

Действует

Plating, Brush General Requirements

SAE AMS2451/4

Заменен

Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement

SAE AMS2451/8A

Действует

Plating, Brush, Non-Cyanide Silver General Purpose

SAE AMS2451/1A

Действует

Plating, Brush, Nickel General Purpose

SAE AMS2759/1G

Заменен

Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)

SAE AMS2759/2F

Заменен

Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher

SAE AMS2451/2

Заменен

Plating, Brush, Nickel Low Stress, Hard Deposit

SAE AMS6474B

Действует

Forgings, Hardenable Steels and Corrosion-Resistant Steels Heat-Treated, Finished-Part Properties Short-Transverse Tensile Strength and Fracture Toughness (Stabilized: Feb 2018)

SAE AMS2759/1J

Действует

Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)

SAE AMS2759/2D

Заменен

Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher

SAE AMS2759/2G

Заменен

Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher

SAE AMS2759/5E

Заменен

Heat Treatment Martensitic Corrosion-Resistant Steel Parts

SAE AMS2451

Заменен

PLATING, BRUSH General Requirements

SAE AMS6474

Заменен

Forgings, Hardenable Steels and Corrosion-Resistant Steels Heat-Treated, Finished-Part Properties Short-Transverse Tensile Strength and Fracture Toughness

SAE AMS2759/3F

Заменен

Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts

SAE AMS2759/1C

Заменен

Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)

SAE AMS2759/3J

Действует

Heat Treatment Precipitation-Hardening Corrosion-Resistant, Maraging, and Secondary Hardening Steel Parts

SAE AMS2759/5F

Действует

Heat Treatment Martensitic Corrosion-Resistant Steel Parts

SAE AMS2759/11

Заменен

Stress Relief of Steel Parts

SAE AMS2759/1D

Заменен

Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)

SAE AMS2759/1E

Заменен

Heat Treatement of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)

SAE AMS2759/2C

Заменен

Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher

SAE AMS2759/2H

Заменен

Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher

SAE AMS2759/1H

Заменен

Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)

SAE AMS2759/3C

Заменен

Heat Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts

SAE AMS2759/2E

Заменен

Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher

SAE AMS2759/2J

Заменен

Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher

SAE AMS2759/4B

Заменен

Heat Treatment Austenitic Corrosion-Resistant Steel Parts

SAE AMS2759/4C

Заменен

Heat Treatment Austenitic Corrosion-Resistant Steel Parts

SAE AMS2759/4D

Действует

Heat Treatment Austenitic Corrosion-Resistant Steel Parts

SAE AMS2759

Заменен

HEAT TREATMENT OF STEEL PARTS General Requirements

SAE AMS2759/11A

Действует

Stress Relief of Steel Parts

SAE AMS2451/3C

Заменен

Plating, Brush, Nickel Low Stress, Low-Hardness Deposit

SAE AMS2451/8B

Действует

Plating, Brush, Non-Cyanide Silver General Purpose

SAE AMS2451/1B

Действует

Plating, Brush, Nickel General Purpose

SAE AMS2451/6B

Действует

Plating, Brush Copper General Purpose

SAE AMS2451/6

Заменен

Plating, Brush, Copper General Purpose

SAE AMS2451/6A

Действует

Plating, Brush, Copper General Purpose

SAE AMS2451/7B

Действует

Plating, Brush, Nickel Low Stress, Medium-Hardness Deposit

SAE AMS2451/7A

Действует

Plating, Brush, Nickel Low Stress, Medium-Hardness Deposit

SAE AMS6474A

Заменен

Forgings, Hardenable Steels and Corrosion-Resistant Steels Heat-Treated, Finished-Part Properties Short-Transverse Tensile Strength and Fracture Toughness

SAE AMS2759/1F

Заменен

Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)

SAE AMS2759/3G

Заменен

Heat Treatment Precipitation-Hardening Corrosion-Resistant, Maraging, and Secondary Hardening Steel Parts

SAE AMS2759/3H

Заменен

Heat Treatment Precipitation-Hardening Corrosion-Resistant, Maraging, and Secondary Hardening Steel Parts

SAE AMS2759/2K

Действует

Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher

SAE AMS2759/5C

Заменен

Heat Treatment Martensitic Corrosion Resistant Steel Parts

SAE AMS2759/5D

Заменен

Heat Treatment Martensitic Corrosion-Resistant Steel Parts

SAE AMS6300D

Заменен

Steel Bars and Forgings 0.25Mo (0.35 - 0.40C) (SAE 4037)

SAE AMS2451/5C

Действует

Plating, Brush, Chromium Hard Deposit, Trivalent

SAE AS21241

Действует

BEARING, SLEEVE, FLANGED, SELF – LUBRICATING −65 TO +250 °F

SAE AS21240

Действует

BEARING, SLEEVE, PLAIN, SELF – LUBRICATING −65 TO +250 °F

SAE AS81936A

Действует

Bearings, Plain, Self-Aligning (Cu-Be Ball, CRES Race) General Specification For

SAE AS4510A

Действует

Fittings, Weld, Fluid Connection, 5000 psi Maximum

SAE AS4510

Заменен

Fittings, Weld, Fluid Connection, 5000 psi

SAE AS81935/3B

Заменен

LOCKING DEVICES (FOR ROD END BEARINGS)

SAE AS81935/3C

Заменен

LOCKING DEVICES (FOR ROD END BEARINGS)

SAE AS81935/3A

Заменен

LOCKING DEVICES (FOR ROD END BEARINGS)

SAE AS81935/3D

Действует

LOCKING DEVICES (FOR ROD END BEARINGS)

SAE AS82819/1

Действует

BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 300 CPM (13 FPM) OSCILLATION, -65 TO +160 °F, LINERS LESS THAN .015 INCH THICK

SAE AS1424H

Действует

Hose Assemblies, Metal, Medium Pressure, High Temperature

SAE AS83819/1

Действует

BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 1400 CPM (15 FPM) OSCILLATION, -65 TO +160 °F (-54 TO +71 °C)

SAE AS81819/1A

Действует

BEARINGS, PLAIN, SELF-LUBRICATING SELF-ALIGNING, HIGH SPEED OSCILLATION −65 TO +160 °F

SAE AS1424F

Заменен

Hose Assemblies, Metal, Medium Pressure, High Temperature

SAE AS1424G

Заменен

Hose Assemblies, Metal, Medium Pressure, High Temperature

SAE MA1573A

Заменен

Nut, Self-Locking - Steel, Class 1100 MPa/235 °C, MJ Thread Procurement Specification For, Metric

SAE MA1573B

Действует

Nut, Self-Locking - Steel, Class 1100 MPa/235 °C, MJ Thread Procurement Specification For, Metric (Stabilized: Dec 2021)

SAE MA1573

Заменен

Nut, Self-Locking - Steel, Class 1100 MPa/235°C, MJ Thread Procurement Specification For, Metric

SAE ARP4915A

Действует

Disposition of Landing Gear Components Involved in Accidents/Incidents

SAE AS6235B

Действует

Face Seal Gland Design, Static, O-Ring and Other Seals for Aerospace Hydraulic and Pneumatic Applications

SAE AS6235A

Заменен

Face Seal Gland Design, Static, O-ring and Other Seals for Aerospace Hydraulic and Pneumatic Applications

SAE AS6235

Заменен

Face Seal Gland Design, Static, O-ring and Other Seals for Aerospace Hydraulic and Pneumatic Applications

SAE AS4444

Действует

Fittings, 24° Cone Flareless, Fluid Connection, 5000 psi

SAE AMS5412

Заменен

Steel Castings, Vacuum Melted, Vacuum Cast, Investment, Corrosion Resistant 13Cr - 8.0Ni - 2.2Mo - 1.1Al (195,000 psi (1344 MPa) Tensile Strength (Condition H1000) Homogenized, Solution, and Precipitation Heat Treated

SAE AMS5412A

Заменен

Steel Castings, Vacuum Melted, Vacuum Cast, Investment, Corrosion-Resistant 13Cr - 8.0Ni - 2.2Mo - 1.1Al (195 ksi (1344 MPa) Tensile Strength (Condition H1000) Homogenized, Solution, and Precipitation Heat Treated

SAE AMS5354G

Действует

Steel, Corrosion and Heat Resistant, Investment Castings 13Cr - 2.0Ni - 3.0W Hardened and Tempered to 32 - 38 HRC

SAE AMS5412B

Действует

Steel Castings, Vacuum Melted, Vacuum Cast, Investment, Corrosion-Resistant 13Cr - 8.0Ni - 2.2Mo - 1.1Al 195 ksi (1344 MPa) Tensile Strength (Condition H1000) Homogenized, Solution, and Precipitation Heat Treated

SAE AMS5354F

Действует

Steel, Corrosion and Heat Resistant, Investment Castings 13Cr - 2.0Ni - 3.0W Hardened and Tempered to 32 – 38 HRC

SAE AMS2762B

Заменен

Carburizing Carbon and Low-Alloy Steel Parts

SAE AMS2762C

Действует

Carburizing Carbon and Low-Alloy Steel Parts (Stabilized: Mar 2018)

SAE AMS2759/8

Заменен

ION NITRIDING