Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыSAE

SAE AMS3281A

Заменен
SEALING COMPOUND, POLYSULFIDE (T) SYNTHETIC RUBBER for Integral Fuel Tank and Fuel Cell Cavities Low Density (1.20 to 1.35 sp gr), for Intermittent Use to 360 °F (182 °C)
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

SAE AMS2471K
Действует
Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Undyed Coating
SAE AMS2629F
Действует
Fluid, Jet Reference
SAE AMS3100E
Действует
Adhesion Promoter for Polysulfide Sealing Compounds
SAE AMS3819D
Действует
Cloths, Cleaning For Aircraft Primary and Secondary Structural Surfaces
SAE AMS4045M
Действует
Aluminum Alloy Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated
SAE AMS4049N
Действует
Aluminum Alloy, Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651 Plate) Solution and Precipitation Heat Treated
SAE AMS4901U
Действует
Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa)
SAE AMS5516R
Действует
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (302) Solution Heat Treated
ASTM D2240-15e1
Заменен
Standard Test Method for Rubber Property—;Durometer Hardness — 13 стр.
ASTM D4129-98(2003)
Заменен
Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection — 7 стр.
ASTM D792-98
Заменен
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement — 6 стр.
SAE AMS3281B
Заменен
Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density (1.20 to 1.35 sp gr), for Intermittent Use to 360 °F (182 °C)
SAE AMS3281
Заменен
SEALING COMPOUND, POLYSULFIDE (T) SYNTHETIC RUBBER for Integral Fuel Tank and Fuel Cell Cavities Low Density (1.35 sp gr max), for Intermittent Use to 360 °F (182 °C)

На этот документ ссылаются

SAE AMS3281
Заменен
SEALING COMPOUND, POLYSULFIDE (T) SYNTHETIC RUBBER for Integral Fuel Tank and Fuel Cell Cavities Low Density (1.35 sp gr max), for Intermittent Use to 360 °F (182 °C)
SAE AMS3281B
Заменен
Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density (1.20 to 1.35 sp gr), for Intermittent Use to 360 °F (182 °C)