Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыSAE

SAE AMS3281C

Заменен
Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density (1.20 to 1.35 sp gr), for Intermittent Use to 360 °F (182 °C)
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

SAE AMS2471K
Действует
Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Undyed Coating
SAE AMS2629F
Действует
Fluid, Jet Reference
SAE AMS3020B
Действует
Oil, Reference, for “L” Stock Rubber Testing
SAE AMS3021G
Действует
Fluid, Reference for Testing Di-Ester (Polyol) Resistant Material
SAE AMS3021B
Заменен
FLUID, REFERENCE FOR TESTING DI-ESTER (POLYOL) RESISTANT MATERIAL
SAE AMS3100E
Действует
Adhesion Promoter for Polysulfide Sealing Compounds
SAE AMS3276H
Действует
Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)
SAE AMS4045M
Действует
Aluminum Alloy Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated
SAE AMS4049N
Действует
Aluminum Alloy, Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651 Plate) Solution and Precipitation Heat Treated
SAE AMS4911S
Действует
Titanium Alloy, Sheet, Strip, and Plate, 6Al - 4V, Annealed
SAE AMS5516R
Действует
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (302) Solution Heat Treated
SAE AMSC27725D
Действует
Coating, Corrosion Preventative, for Aircraft Integral Fuel Tanks for Use to 250 °F (121 °C)
SAE AS5127D
Действует
Aerospace Standard Test Methods for Aerospace Sealants Methods for Preparing Aerospace Sealant Test Specimens
SAE AS5127/1D
Действует
Aerospace Standard Test Methods for Aerospace Sealants Two-Component Synthetic Rubber Compounds
SAE AS5502F
Действует
Standard Requirements for Aerospace Sealants and Adhesion Promoters
SAE AMS3281D
Заменен
Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C)
SAE AMS3281B
Заменен
Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density (1.20 to 1.35 sp gr), for Intermittent Use to 360 °F (182 °C)

На этот документ ссылаются

SAE AMS3281B
Заменен
Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density (1.20 to 1.35 sp gr), for Intermittent Use to 360 °F (182 °C)
SAE AMS3281D
Заменен
Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C)