Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыSAE

SAE AMS4901U

Действует
Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa)
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

SAE AMS2242G
Действует
Tolerances Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and Plate
SAE AMS2249J
Действует
Chemical Check Analysis Limits Titanium and Titanium Alloys
SAE AMS2368E
Действует
Sampling and Testing of Wrought Titanium Raw Material Except Forgings and Forging Stock
SAE AMS2750H
Действует
Pyrometry
SAE AMS2809B
Действует
Identification, Titanium and Titanium Alloy Wrought Products
SAE AS6279C
Действует
Standard Practice for Production, Distribution, and Procurement of Metal Stock
ASTM E112-96e3
Заменен
Standard Test Methods for Determining Average Grain Size — 26 стр.
ASTM E1409-97
Заменен
Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique — 4 стр.
ASTM E1447-92(1996)
Заменен
Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method — 3 стр.
ASTM E1941-98
Заменен
Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys — 3 стр.
ASTM E2371-21a
Действует
Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) — 14 стр.
ASTM E290-97a(2004)
Заменен
Standard Test Methods for Bend Testing of Material for Ductility — 7 стр.
ASTM E384-99e1
Заменен
Standard Test Method for Microindentation Hardness of Materials — 24 стр.
ASTM E8M-04
Заменен
Standard Test Methods for Tension Testing of Metallic Materials [Metric] (Withdrawn 2008) — 24 стр.
ASTM E8/E8M-24
Действует
Standard Test Methods for Tension Testing of Metallic Materials — 35 стр.
SAE AMS4901T
Заменен
Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa)

На этот документ ссылаются

SAE MA3438
Заменен
SPACER, SLEEVE - FOR 6MM BOLT, AMS4901 OR AMS4921, METRIC
SAE MA3437
Заменен
SPACER, SLEEVE - FOR 5MM BOLT, AMS4901 OR AMS4921, METRIC
SAE MA3438A
Действует
SPACER, SLEEVE - FOR 6 MM BOLT, AMS4901 OR AMS4921, METRIC (Stabilized: Jan 2019)
SAE MA3437A
Действует
SPACER, SLEEVE - FOR 5 MM BOLT, AMS4901 OR AMS4921, METRIC (Stabilized: Feb 2019)
SAE AMS3378
Заменен
SEALANT, SILICONE, TWO-PART, GENERAL PURPOSE Room Temperature Vulcanizing Non-Fuel Resistant
SAE AMS4901C
Заменен
TITANIUM SHEET, STRIP, AND PLATE Annealed, 70,000 psi Yield
SAE AMS4901D
Заменен
TITANIUM SHEET, STRIP, AND PLATE Annealed, 70,000 psi Yield
SAE AMS4901E
Заменен
TITANIUM SHEET, STRIP, AND PLATE Annealed, 70,000 psi (483 MPa) Yield Strength
SAE AMS4901F
Заменен
TITANIUM SHEET, STRIP, AND PLATE Annealed, 70,000 psi (483 MPa) Yield Strength
SAE AMS4901G
Заменен
TITANIUM SHEET, STRIP, AND PLATE Annealed, 70,000 psi (483 MPa) Yield Strength
SAE AMS4901H
Заменен
TITANIUM SHEET, STRIP, AND PLATE Annealed, 70,000 psi (483 MPa) Yield Strength
SAE AMS4901L
Заменен
TITANIUM SHEET, STRIP, AND PLATE Annealed, 70,000 psi (485 MPa) Yield Strength
SAE AMS4901M
Заменен
TITANIUM SHEET, STRIP, AND PLATE Commercially Pure Annealed, 70.0 ksi (485 MPa)
SAE AMS4901J
Заменен
TITANIUM SHEET, STRIP, AND PLATE Annealed, 70,000 psi (485 MPa) Yield Strength
SAE AMS4901A
Заменен
TITANIUM SHEET AND STRIP Annealed - 70,000 psi Yield
SAE AMS2642E
Заменен
Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure
SAE AMS2642C
Заменен
Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure
SAE AMS2642F
Действует
Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure
SAE AMS2642D
Заменен
Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure
SAE AMS2689B
Действует
Fusion Welding Titanium and Titanium Alloys (Stabilized: Aug 2016)
SAE AMS2689A
Заменен
Fusion Welding Titanium and Titanium Alloys
SAE AMS3269
Заменен
SEALING COMPOUND, POLYSULFIDE (T) SYNTHETIC RUBBER for Integral Fuel Tank and Fuel Cell Cavities High Strength, for Intermittent Use to 360°F (182°C)
SAE AMS3333
Заменен
Sealing Compound, Polysulfide For Aircraft Windshields and Canopies, For Use up to 250 °F (121 °C)
SAE AMS4901B
Заменен
TITANIUM SHEET AND STRIP Annealed - 70,000 psi Yield
SAE AMS4901K
Заменен
TITANIUM SHEET, STRIP, AND PLATE Annealed, 70,000 psi (485 MPa) Yield Strength
SAE AMS2642B
Заменен
Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure
SAE AS3436
Заменен
SPACER, SLEEVE - FOR .250 INCH BOLT, AMS4901 OR AMS4921
SAE AS3435
Заменен
SPACER, SLEEVE - FOR .190 INCH BOLT, AMS4901 OR AMS4921
SAE AMS3263
Заменен
SEALING COMPOUND, POLYTHIOETHER, AMBIENT CURE OR IMMEDIATE HEAT CURE For Aircraft Structures, Fuel Resistant With Intermittent Use To 400 °F (204 °C)
SAE AMS3276C
Заменен
Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use To 360 °F (182 °C)
SAE AMS3263A
Действует
Sealing Compound, Polythioether, Ambient Cure or Immediate Heat Cure For Aircraft Structures, Fuel Resistant with Intermittent Use to 400°CF (204°CC)
SAE AMS3281B
Заменен
Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density (1.20 to 1.35 sp gr), for Intermittent Use to 360 °F (182 °C)
SAE AMS3262
Заменен
Sealing Compound, Silicone Rubber, Two-Part, Electrically Conductive and Corrosion Resistant (Nonchromated) for Use from -67 to 500 °F (-55 to 260 °C)
SAE AMS3262A
Действует
Sealing Compound, Silicone Rubber, Two-Part, Electrically Conductive and Corrosion Resistant (Nonchromated) for Use from -67 to 500 °F (-55 to 260 °C) (Stabilized: Sep 2011)
SAE AMS3277E
Заменен
Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)
SAE AMS3277F
Заменен
Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)
SAE AMS3277B
Заменен
Sealing Compound, Polythioether Rubber Fuel Resistant, Fast Curing Intermittent Use to 360 °F (182 °C)
SAE AMS3277A
Заменен
Sealing Compound, Polythioether Integral Fuel Tanks and General Purpose, Fast Curing Intermittent Use to 360 °F (182 °C)
SAE AMS3279B
Заменен
Sealing Compound, Sprayable For Integral Fuel Tanks and Fuel Cell Cavities, For Intermittent Use to 350 °F (171 °C)
SAE AMS3277K
Заменен
Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)
SAE AMS3277J
Заменен
Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)
SAE AMS3277D
Заменен
Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 400 °F (204 °C)
SAE AMS3277C
Заменен
Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 400 °F (204 °C)
SAE AMS3258
Заменен
Sealing Compound, Polythioether For Aircraft Windshields and Canopies, For Use Up to 300 °F (149 °C)
SAE AMS3284
Заменен
Sealing Compound, Low Adhesion, for Removable Panels and Fuel Tank Inspection Plates
SAE AMS3101
Заменен
Adhesion Promoter For Polysulfide Sealants, Non-crazing of Acrylic and Polycarbonate
SAE AMS3258A
Действует
Sealing Compound, Polythioether For Aircraft Windshields and Canopies, For Use Up to 300 °F (149 °C) (Stabilized: Sep 2011)
SAE AMSS83318
Заменен
Sealing Compound, Polysulfide Type, Low Temperature Curing, Quick Repair, Integral Fuel Tanks and Fuel Cell Cavities
SAE AMS3279A
Заменен
Sealing Compound, Sprayable For Integral Fuel Tanks and Fuel Cell Cavities, For Intermittent Use to 350 °F (171 °C)
SAE AMS3277H
Заменен
Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)
SAE AMS3277G
Заменен
Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)
SAE AMS3101A
Заменен
Adhesion Promoter For Polysulfide Sealants, Non-crazing of Acrylic and Polycarbonate (Noncurrent: Jul 2009)
SAE AMS3101B
Действует
Adhesion Promoter For Polysulfide Sealants, Non-crazing of Acrylic and Polycarbonate (Stabilized: Sep 2011)
SAE AMSS8802
Заменен
Sealing Compound, Temperature Resistant, Integral Fuel Tanks and Fuel Cell Cavities, High Adhesion
SAE AS5127A
Заменен
Methods for Testing Aerospace Sealants
SAE AMSDTL22499A
Заменен
Shim Stock, Laminated
SAE AMSDTL22499B
Действует
Shim Stock, Laminated (Stabilized: May 2018)
SAE AMS3279C
Заменен
Sealing Compound, Sprayable For Integral Fuel Tanks and Fuel Cell Cavities, For Intermittent Use to 350 °F (177 °C)
SAE AMS3333B
Действует
Sealing Compound, Polysulfide For Aircraft Windshields and Canopies, For Use up to 250 °F (121 °C) (Stabilized: Jan 2012)
SAE AMS3333A
Заменен
Sealing Compound, Polysulfide For Aircraft Windshields and Canopies, For Use up to 250 °F (121 °C)
SAE AMS4901P
Заменен
Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa)
SAE AMS4901T
Заменен
Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa)
SAE AMS4901N
Заменен
Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa)
SAE AMS3265A
Заменен
Sealing Compound, Polysulfide (T) Rubber, Nonchromated, Corrosion Inhibiting For Intermittent Use to 360 °F (182 °C)
SAE AMS3259B
Действует
Sealing Compound, Polythioether Nonchromated, Corrosion Inhibiting for Intermittent Use to 360°F (182°C)
SAE AMS4901R
Заменен
Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa)
SAE AMS4901S
Заменен
Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa)
SAE AMS2801C
Заменен
Heat Treatment of Titanium Alloy Parts
SAE AMS2801B
Заменен
Heat Treatment of Titanium Alloy Parts
SAE AMS2801A
Заменен
HEAT TREATMENT OF TITANIUM ALLOY PARTS
SAE AMS2685C
Заменен
WELDING, TUNGSTEN ARC, INERT GAS (GTAW Method)
SAE AMS2685D
Заменен
Welding, Tungsten Arc, Inert Gas (GTAW Method)
SAE AMS2685E
Заменен
Welding, Tungsten Arc, Inert Gas (GTAW Method)
SAE AMS2685F
Действует
Welding, Tungsten Arc, Inert Gas (GTAW Method) (Stabilized: Sep 2017)
SAE AMS4949A
Заменен
Titanium, Sheet, Laminated, Surface Bonded
SAE AMS4949B
Заменен
Titanium, Sheet, Laminated, Surface Bonded
SAE AMS4949C
Действует
Titanium, Sheet, Laminated, Surface Bonded
SAE AMS4949
Заменен
Titanium, Sheet, Laminated, Surface Bonded
SAE AMS3284C
Заменен
Sealing Compound, Low Adhesion, for Removable Panels and Fuel Tank Inspection Plates
SAE AMS3284B
Заменен
Sealing Compound, Low Adhesion, for Removable Panels and Fuel Tank Inspection Plates
SAE AMS3284A
Заменен
Sealing Compound, Low Adhesion, for Removable Panels and Fuel Tank Inspection Plates
SAE AMS3279D
Действует
Sealing Compound, Sprayable For Integral Fuel Tanks and Fuel Cell Cavities, For Intermittent Use to 350 °F (177 °C) (Stabilized: Mar 2013)
SAE AMS3259A
Заменен
Sealing Compound, Polythioether Nonchromated, Corrosion Inhibiting for Intermittent Use to 360 °F (182 °C)
SAE AS1654C
Заменен
SLEEVE, THREADLESS - FLEXIBLE, FIXED CAVITY, SELF-BONDING
SAE AS1654D
Заменен
SLEEVE, THREADLESS - FLEXIBLE, FIXED CAVITY, SELF-BONDING
SAE AS1654B
Заменен
SLEEVE, THREADLESS - FLEXIBLE, FIXED CAVITY, SELF-BONDING
SAE AS5127C
Заменен
Aerospace Standard Test Methods for Aerospace Sealants Methods for Preparing Aerospace Sealant Test Specimens
SAE AS5127B
Заменен
Aerospace Standard Test Methods for Aerospace Sealants Methods for Preparing Aerospace Sealant Test Specimens
SAE AMS3281A
Заменен
SEALING COMPOUND, POLYSULFIDE (T) SYNTHETIC RUBBER for Integral Fuel Tank and Fuel Cell Cavities Low Density (1.20 to 1.35 sp gr), for Intermittent Use to 360 °F (182 °C)
SAE AMS3265
Заменен
SEALING COMPOUND, POLYSULFIDE (T) RUBBER Nonchromated, Corrosion Inhibiting for Intermittent Use to 340 °C (171 °F)
SAE AMS3277
Заменен
SEALING COMPOUND, POLYTHIOETHER Integral Fuel Tanks and General Purpose, Fast Curing Intermittent Use to 360 °F (182 °C)
SAE AMS3279
Заменен
SEALING COMPOUND, SPRAYABLE, For Integral Fuel Tanks and Fuel Cell Cavities, Intermittent Use to 350 °F (177 °C)
SAE AMS3276B
Заменен
SEALING COMPOUND, INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 °F (182 °C)
SAE AMS4901
Заменен
TITANIUM SHEET AND STRIP Annealed - 70,000 psi Yield
SAE AS5127
Заменен
METHODS FOR TESTING AEROSPACE SEALANTS