Каталог стандартов
+7 (495) 223-46-76
+7 (812) 309-78-59
inform@normdocs.ru
О компании
Стандарты
Контакты
Заказать стандарт
Стандарты
SAE
SAE AS1009E
Заменен
TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARELESS TUBE
Описание
Изменения
Ссылки
Версии
Ссылочные документы
SAE AMS2472H
Действует
Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Dyed Coatings
SAE AMS4112D
Отменен
Aluminum Alloy, Bars, Rods, and Wire 4.4cu 1.5mg 0.60mn Rolled, Drawn, Or Cold Finished
SAE AMS4124F
Действует
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged
SAE AMS4133F
Действует
Aluminum Alloy Forgings and Rolled Rings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated
SAE AMS4141H
Действует
Aluminum Alloy Die Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated
SAE AMS4928W
Действует
Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed
SAE AMS5639K
Действует
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging and Ring Stock 19Cr - 10Ni Solution Heat Treated
SAE AMS5645T
Действует
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock 18Cr - 10Ni - 0.40Ti (321) Solution Heat Treated
SAE AMS5646R
Действует
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock 18Cr - 11Ni - 0.60Cb(Nb) (347) Solution Heat Treated
SAE AMS5648N
Действует
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Rings 17Cr - 12Ni - 2.5Mo (316) Solution Heat Treated
SAE AMS6370R
Действует
Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
SAE ARP4296B
Действует
Drawing Interpretation and Standard Machining Practices, Couplings, Fittings and Hose Ends, Fluid Systems
SAE AS1376E
Действует
ALTERNATE DIMENSIONS, CENTER BODY SECTION, SHAPE FLUID FITTING, DESIGN STANDARD
SAE AS478S
Действует
Identification Marking Methods
SAE AS1009F
Заменен
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARELESS
SAE AS1009D
Заменен
TEE, REDUCER, BULKHEAD ON SIDE, FLARELESS TUBE
На этот документ ссылаются
SAE AS1009D
Заменен
TEE, REDUCER, BULKHEAD ON SIDE, FLARELESS TUBE
SAE AS1009F
Заменен
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARELESS