Каталог стандартов
+7 (495) 223-46-76
+7 (812) 309-78-59
inform@normdocs.ru
О компании
Стандарты
Контакты
Заказать стандарт
Стандарты
SAE
SAE AS1010F
Заменен
FITTING, ELBOW, 45°, STANDARD AND REDUCER, BULKHEAD, FLARELESS
Описание
Изменения
Ссылки
Версии
Ссылочные документы
SAE AMSQQA225/6B
Действует
Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished (Stabilized: Mar 2018)
SAE AMSQQP416G
Действует
Plating, Cadmium (Electrodeposited)
SAE AMS2472H
Действует
Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Dyed Coatings
SAE AMS2486F
Действует
Conversion Coating of Titanium Alloys Fluoride-Phosphate Type
SAE AMS2488E
Действует
Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher
SAE AMS4124F
Действует
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged
SAE AMS4133F
Действует
Aluminum Alloy Forgings and Rolled Rings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated
SAE AMS4141H
Действует
Aluminum Alloy Die Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated
SAE AMS4377J
Действует
Magnesium Alloy, Sheet and Plate 3.0Al - 1.0Zn – 0.20Mn (AZ31B-H24) Cold Rolled, Partially Annealed
SAE AMS4928W
Действует
Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed
SAE AMS5639K
Действует
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging and Ring Stock 19Cr - 10Ni Solution Heat Treated
SAE AMS5645T
Действует
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock 18Cr - 10Ni - 0.40Ti (321) Solution Heat Treated
SAE AMS5646R
Действует
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock 18Cr - 11Ni - 0.60Cb(Nb) (347) Solution Heat Treated
SAE AMS5648N
Действует
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Rings 17Cr - 12Ni - 2.5Mo (316) Solution Heat Treated
SAE AMS6370R
Действует
Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
SAE AMSQQA225/9A
Действует
Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished (Stabilized: Jul 2014)
SAE AMSQQA367E
Действует
Aluminum Alloy Forgings (Stabilized: Mar 2018)
SAE AMSQQS763D
Действует
Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings (Stabilized: Mar 2015)
SAE AMSS6758B
Действует
Steel, Chrome-Molybdenum (4130) Bars and Reforging Stock (Aircraft Quality) (Stabilized: Nov 2017)
SAE ARP4296B
Действует
Drawing Interpretation and Standard Machining Practices, Couplings, Fittings and Hose Ends, Fluid Systems
SAE AS1376E
Действует
ALTERNATE DIMENSIONS, CENTER BODY SECTION, SHAPE FLUID FITTING, DESIGN STANDARD
SAE AS18280SUP1A
Действует
Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi (Supplement 1)
SAE AS21907E
Действует
ELBOW, BULKHEAD UNIVERSAL, 45 DEGREES, FLARELESS TUBE
SAE AS21912E
Действует
TEE, FLARELESS TUBE WITH BULKHEAD ON RUN
SAE AS4377C
Действует
FITTING END, BULKHEAD, FLARELESS, DESIGN STANDARD
AS44445AR-10
Действует
AS44445AR Amendment Record for Drawing Standard No. AS44445
SAE AS478S
Действует
Identification Marking Methods
SAE AS478J
Заменен
IDENTIFICATION MARKING METHODS
SAE AS1010G
Заменен
FITTING, ELBOW, 45 DEGREE, STANDARD AND REDUCER, BULKHEAD, FLARELESS
SAE AS1010E
Заменен
FITTING, ELBOW, 45°, STANDARD AND REDUCER, BULKHEAD, FLARELESS
На этот документ ссылаются
SAE AS1010E
Заменен
FITTING, ELBOW, 45°, STANDARD AND REDUCER, BULKHEAD, FLARELESS
SAE AS1010G
Заменен
FITTING, ELBOW, 45 DEGREE, STANDARD AND REDUCER, BULKHEAD, FLARELESS