Стандарт SAE AS18280D

SAE AMSH6875C

Действует

Heat Treatment of Steel Raw Materials (Stabilized: Sep 2020)

SAE AMSQQA225/6B

Действует

Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished (Stabilized: Mar 2018)

SAE AMS2241T

Действует

Tolerances, Corrosion- and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire

SAE AMS2472H

Действует

Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Dyed Coatings

SAE AMS2486F

Действует

Conversion Coating of Titanium Alloys Fluoride-Phosphate Type

SAE AMS2488E

Действует

Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher

SAE AMS2658D

Действует

Hardness and Conductivity Inspection of Wrought Aluminum Alloy Parts

SAE AMS2700F

Действует

Passivation of Corrosion Resistant Steels

SAE AMS2759/3J

Действует

Heat Treatment Precipitation-Hardening Corrosion-Resistant, Maraging, and Secondary Hardening Steel Parts

SAE AMS2770R

Действует

Heat Treatment of Wrought Aluminum Alloy Parts

SAE AMS2772H

Действует

Heat Treatment of Aluminum Alloy Raw Materials

SAE AMS4083M

Действует

Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated

SAE AMS4124F

Действует

Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged

SAE AMS4133F

Действует

Aluminum Alloy Forgings and Rolled Rings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated

SAE AMS4141H

Действует

Aluminum Alloy Die Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated

SAE AMS4339C

Действует

Aluminum Alloy, Rolled or Cold Finished Bars and Rods 4.4Cu - 1.5Mg - 0.60Mn (2024-T851) Solution Heat Treated, Cold Worked, and Artificially Aged

SAE AMS4911S

Действует

Titanium Alloy, Sheet, Strip, and Plate, 6Al - 4V, Annealed

SAE AMS4928W

Действует

Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed

SAE AMS4946F

Действует

Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Texture Controlled Cold Worked, Stress Relieved

SAE AMS5561H

Действует

Steel, Corrosion and Heat-Resistant, Welded and Drawn or Seamless and Drawn Tubing 9.0Mn - 20Cr - 6.5Ni - 0.28N High-Pressure Hydraulic

SAE AMS5564D

Действует

Steel, Corrosion Resistant, Tubing 19Cr - 10Ni High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless Cold Drawn, One Eighth - Hard Temper

SAE AMS5566N

Действует

Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (304) High Pressure, Cold Drawn

SAE AMS5639K

Действует

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging and Ring Stock 19Cr - 10Ni Solution Heat Treated

SAE AMS5645T

Действует

Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock 18Cr - 10Ni - 0.40Ti (321) Solution Heat Treated

SAE AMS5648N

Действует

Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Rings 17Cr - 12Ni - 2.5Mo (316) Solution Heat Treated

SAE AMS5659T

Действует

Steel, Corrosion Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu Consumable Electrode Remelted Solution Heat Treated, Precipitation Hardenable

SAE AMS6370R

Действует

Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)

SAE AMSQQA225/9A

Действует

Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished (Stabilized: Jul 2014)

SAE AMSQQP416G

Действует

Plating, Cadmium (Electrodeposited)

SAE AMSQQS763D

Действует

Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings (Stabilized: Mar 2015)

SAE AMST6845B

Действует

Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition (Stabilized: Jul 2013)

SAE AMST7081A

Действует

Tube, Aluminum Alloy, Seamless, Round, Drawn, 6061, Aircraft Hydraulic Quality

SAE ARP1185C

Действует

Flexure Testing of Hydraulic Tubing Joints and Fittings (Stabilized: Apr 2019)

SAE ARP9013A

Действует

Statistical Product Acceptance Requirements

SAE AS1001K

Действует

FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL PORT ON SIDE, FLARELESS

SAE AS1002K

Действует

FITTING, TEE, STANDARD AND REDUCER, BULKHEAD AND INTERNAL PORT ON RUN, FLARELESS

SAE AS1003K

Действует

FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARELESS

SAE AS1004H

Действует

FITTING, ELBOW, 90°, STANDARD AND REDUCER, FLARELESS

SAE AS1005H

Действует

FITTING, TEE, STANDARD AND REDUCER, FLARELESS

SAE AS1006G

Действует

FITTING, CROSS, STANDARD AND REDUCER, FLARELESS

SAE AS1008K

Действует

FITTING, ELBOW, 90°, STANDARD AND REDUCER, BULKHEAD, FLARELESS

SAE AS1009K

Действует

FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARELESS

SAE AS1010H

Действует

FITTING, ELBOW, 45 DEGREE, STANDARD AND REDUCER, BULKHEAD, FLARELESS

SAE AS1241D

Действует

Fire Resistant Phosphate Ester Hydraulic Fluid for Aircraft

SAE AS1376E

Действует

ALTERNATE DIMENSIONS, CENTER BODY SECTION, SHAPE FLUID FITTING, DESIGN STANDARD

SAE AS1581E

Действует

FITTING, SLEEVE, FLARELESS ACORN TO INTEGRAL WELD RING, 3000 PSI

SAE AS18280/1C

Действует

Sleeve, Bite Type, 24° Cone Flareless Fitting, 3000 psi (Stabilized: Oct 2017)

SAE AS18280/2B

Действует

Sleeves, Internally or Externally Swaged or Welded, 24° Cone Flareless Fitting, 3000 psi (Stabilized: Sep 2024)

SAE AS2094B

Действует

Test Methods for Tube-Fitting Assemblies (Stabilized: Jul 2018)

SAE AS21914E

Действует

CAP, PRESSURE SEAL, FLARELESS TUBE FITTING

SAE AS21922C

Действует

SLEEVE, COUPLING, FLARELESS (Stabilized: May 2017)

SAE AS33514E

Действует

FITTING END, STANDARD DIMENSIONS FOR FLARELESS TUBE CONNECTION AND GASKET SEAL

SAE AS33515D

Действует

FITTING END, STANDARD DIMENSIONS FOR BULKHEAD FLARELESS TUBE CONNECTIONS

SAE AS4375C

Действует

FITTING END, FLARELESS, DESIGN STANDARD

SAE AS4377C

Действует

FITTING END, BULKHEAD, FLARELESS, DESIGN STANDARD

AS44445AR-10

Действует

AS44445AR Amendment Record for Drawing Standard No. AS44445

SAE AS4458B

Действует

FITTING END, FLARELESS, BLUNT NOSE, DESIGN STANDARD

SAE AS4658

Действует

FITTING END, EXTERNAL THREAD, SHORT FLARELESS, DESIGN STANDARD

SAE AS4659A

Действует

FITTING END, EXTERNAL THREAD, SHORT FLARELESS, DESIGN STANDARD

SAE AS4703A

Действует

FITTING END, ACORN, SHORT FLARELESS, DESIGN STANDARD

SAE AS478S

Действует

Identification Marking Methods

SAE AS5148A

Действует

Assembly, Installation, and Torque for Flareless and Straight Thread Fluid Fittings and Tube Assemblies

SAE AS5272G

Действует

Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification

SAE AS5620C

Действует

Titanium Hydraulic Tubing, Ti-3Al-2.5V Cold Worked and Stress Relieved, Up to 35000 kPa (5080 psi), Requirements for Qualification Testing and Control

SAE AS5863

Действует

FITTING END, 24° CONE, FLARELESS, FLUID CONNECTION, DESIGN STANDARD

SAE AS5864A

Действует

FITTING END, BULKHEAD, 24° CONE, FLARELESS, FLUID CONNECTION, DESIGN STANDARD

SAE AS7003E

Заменен

Nadcap Program Requirements

SAE AS8879D

Действует

Screw Threads - UNJ Profile, Inch Controlled Radius Root with Increased Minor Diameter