Каталог стандартов
+7 (495) 223-46-76
+7 (812) 309-78-59
inform@normdocs.ru
О компании
Стандарты
Контакты
Заказать стандарт
Стандарты
SAE
SAE AS4370A
Заменен
NUT, FITTING, RETAINED
Описание
Изменения
Ссылки
Версии
Ссылочные документы
SAE AMS2486F
Действует
Conversion Coating of Titanium Alloys Fluoride-Phosphate Type
SAE AMS2488E
Действует
Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher
SAE AMS4112D
Отменен
Aluminum Alloy, Bars, Rods, and Wire 4.4cu 1.5mg 0.60mn Rolled, Drawn, Or Cold Finished
SAE AMS4124F
Действует
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged
SAE AMS4928W
Действует
Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed
SAE AMS5639K
Действует
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging and Ring Stock 19Cr - 10Ni Solution Heat Treated
SAE AMS5645T
Действует
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock 18Cr - 10Ni - 0.40Ti (321) Solution Heat Treated
SAE AMS5648N
Действует
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Rings 17Cr - 12Ni - 2.5Mo (316) Solution Heat Treated
SAE AMS6370R
Действует
Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)
SAE ARP4296B
Действует
Drawing Interpretation and Standard Machining Practices, Couplings, Fittings and Hose Ends, Fluid Systems
SAE AS1043H
Действует
SAFETY WIRE HOLES, HEX, FITTING, LOCATION OF, DESIGN STANDARD
SAE AS1791E
Действует
WIRE, RETAINER - TUBE COUPLING NUT
AS44445AR-10
Действует
AS44445AR Amendment Record for Drawing Standard No. AS44445
SAE AS478S
Действует
Identification Marking Methods
SAE AS4370B
Заменен
NUT, FITTING, RETAINED
SAE AS4370
Заменен
NUT - SWIVEL, WIRED ON
На этот документ ссылаются
SAE AS4370
Заменен
NUT - SWIVEL, WIRED ON
SAE AS4370B
Заменен
NUT, FITTING, RETAINED